• 한국해양공학회지
• /
• 제29권2호
• /
• pp.120-127
• /
• 2015

When a deep-seabed lifting pump is kept this device has bending and deformation in the axis due to its long length(8m). These influences can be caused a breakdown. Therefore, a mounting must be developed to keep the lifting pump safe. This paper discusses the hydraulic cylinder design of the lifting pump and structural safety estimation of the mounting using SBD(simulation-based design). The multi-body dynamic simulation method is used, which has been used in the automotive, structural, ship building, and robotics industries. In this study, the position and diameter of the hydraulic cylinder were determined based on the results of the strokes and buckling loads for the design positions of the hydraulic cylinder. A structural dynamic model of the mounting system was constructed using the determined design values, and the structural safety was evaluated using this dynamic model. According to these results, this system has a sufficient safety factor to manufacture.

• 대한한의학원전학회지
• /
• 제19권2호통권33호
• /
• pp.138-162
• /
• 2006

'On the Morbid Pulse of Abdominal Fullness, Cold Mounting, and Abiding Food' in the Chapter 10 of Synopsis of Golden Chamber that enunciates Abdominal Fullness, Cold Mounting, and Abiding Food is related to the stomach and intestines respectively, and is similar to the region and symptom of disease in the light of both abdominal fullness and symptoms of pain. This chapter was united into one because the formula mentioned in this chapter can be applied to three disease patterns. Abdominal fullness shows the symptoms of distention and unease, but judging from the text as well as a specific formula and symptoms, it follows pain. Accordingly Abdominal fullness dealt with in this chapter is the first consideration and it is a kind of a disease pattern attendant on abdominal pain. Cold Mounting does not mean mounting gi disease but means the abdominal pain. The cause of cold mounting is mainly due to insufficiency of yang gi and oversufficiency of cold evil. And the main symptoms of cold mounting follow the severe pain around the naval and sweating, cold of the extremities, pulse deep and tight. Abiding food is of the same meaning such as damage of food today. Abiding food is now referred to as damage of food. Principles which have set forth in this chapter are put to use of the method of ejection in case that abiding food places in the upper part, precipitation in the lower part. The symptoms of abiding food show that the pulse is slight and slippery and the wrist pulse is both superficial and large and rough in applying the pressure, and the cubit pulse is also slight and superficial as well, and that have diarrhea and have little appetite.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1301-1302
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.551-552
• /
• 2009

• 대한치과보철학회지
• /
• 제59권1호
• /
• pp.146-152
• /
• 2021

정확한 보철물의 제작을 위해서는 악간 관계의 정확한 인기가 중요하다. 전통적 석고 모형을 이용한 교합기에의 모형 부착 뿐 아니라 최근 디지털 치의학의 발전으로 디지털 모형 부착방법의 정확도에 대한 고찰이 필요하다. 본 논문에서는 Pubmed 검색을 이용하여 전통적 방법과 디지털을 이용한 모형 부착의 정확도에 대한 문헌 연구를 진행하였다. 전통적 교합인기재의 경우 폴리이써와 폴리비닐실록산 등의 탄성인기재가 변위량이 적었으며, 인기 기법에 따라 정확도의 차이가 관찰되었다. 모형 부착 과정에서 수직적 변위가 발생할 수 있으나 인기재 자체의 변화보다 모형을 교합기 상에 부착하는 과정 자체에서의 오차가 더 크게 나타난다고 보고되었다. 디지털 치의학의 발전으로 최근 많이 사용되고 있는 가상 모형 부착의 경우 좁은 범위에서는 유의미한 차이를 보이지 않지만 가상 인상 채득의 범위가 커질수록 정확성이 다소 떨어지는 경향을 보이기 때문에 광범위한 수복에서는 이를 인지하고 임상에 적용해야 한다. 각 제조사별 스캐너의 종류와 이미지 처리 알고리즘, 소프트웨어 또한 가상 모형 부착의 정확도에 영향을 미칠 수 있으며, 이는 앞으로 충분히 발전 가능성을 보인다.

• Journal of Information Technology Applications and Management
• /
• 제11권2호
• /
• pp.29-43
• /
• 2004

As the development of an information technique, gradually, mobile device is going to be miniaturized and operates at high speed. By such the requirements, the devices using a flash memory as a storage media are increasing. The flash memory consumes low power, is a small size, and has a fast access time like the main memory. But the flash memory must erase for recording and the erase cycle is limited. JFFS is a representative filesystem which reflects the characteristics of the flash memory. JFFS to be consisted of LSF structure, writes new data to the flash memory in sequential, which is not related to a file size. Mounting a filesystem or an error recovery is achieved through the sequential approach. Therefore, the mounting delay time is happened according to the file system size. This paper proposes a MJFFS to use a multi-checkpoint information to manage a mass flash file system efficiently. A MJFFS, which improves JFFS, divides a flash memory into the block for suitable to the block device, and stores file information of a checkpoint structure at fixed interval. Therefore mounting and error recovery processing reduce efficiently a number of filesystem access by collecting a smaller checkpoint information than capacity of actual files. A MJFFS will be suitable to a mobile device owing to accomplish fast mounting and error recovery using advantage of log foundation filesystem and overcoming defect of JFFS.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.17-23
• /
• 2006

Rubber materials have the nonlinear, large deformation and viscoelastic behavior. W.D. Kim et al. studied these characteristics through the static, fatigue, dynamic, aging and viscoelastic test. This paper discussed that the properties of engine mounting rubber, such as static stiffness, fatigue life and damping factor, are predicted based on CAE by using material properties acquired by the report of Kim et al. In result, the static stiffness of engine mounting rubber is predicted approximately in comparison with test value. Also, it was confirmed that the relationship of fatigue life and Green-Lagrange strain in specimen was the valid tool to predict the fatigue life of engine mounting rubber. From the results of transient viscoelastic analysis the damping factor changed rapidly at the range less than 8hz.

• 한국잠사곤충학회지
• /
• 제37권2호
• /
• pp.127-131
• /
• 1995

비름과 다년생 초분류의 Acyranthes속 식물인 쇠무릎에서 phytoecdysone을 추출하여 누에에 첨식시킨 후 누에의 등족촉진효과에 관한 생물검정을 실시하였다. 1. 쇠무릎에서 추출정제한 phytoecdysone을 정량한 결과, 건물 1Kg당 355mg이 회수되었으며, TLC 동정 결과 $\beta$0ecdysone과 동일한 물질로 판명되었다. 2. Phytoecdysone 투여후 약 4시간째부터 처리구가 대조구에 비해 등족율이 높아졌으며, 등족완료시간도 짧았다. 3. Phytoecdysone 투여 효과는 춘잠기와 하잠기(불량환경)간에 차이를 보였다. 춘잠기에는 등족촉진효과 만이 인정되었을뿐 견질 및 화용비율은 대조구와 큰 차이가 없었으나, 하잠기에는 등족촉진효과 뿐만 아니라 화용 비율도 크게 향상되었다.

• 한국잠사곤충학회지
• /
• 제13권2호
• /
• pp.135-139
• /
• 1971

1. Ecdysterone의 숙화 촉진작용은 5령 성식기이후에 유효하다. 2. Ecdysterone은 누에의 숙화를 촉진하고 또 초숙잠과 종숙잠간의 시차폭을 축소시킨다. 3. Ecdysterone의 숙화 촉진작용은 Ecdysterone의 식하량과 비례한다. 4. Dodecyl alcohol 주제의 DAT는 등족작용을 촉진한다. 5. Ecdysterone과 Dodecyl alcohol의 병용은 숙화와 등족을 촉진하여 자연상족을 가능케 하며 상족기술 개량에 공헌할 줄 믿는다.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.30-42
• /
• 2013

This study investigates the effects of OSRVM mounting location and its configurations such as stalk height and housing height on the aerodynamic performance of the passenger car. In order to validate the flow solver, FLUENT which is very well known commercial code, the flow field around an Ahmed Body was analyzed numerically and compared with the experimental data. The predicted aerodynamic performance and flow patterns around a car show good agreements with the experimental data. Mounting location and stalk height should be designed while OSRVM is mounted on the car to evaluate the aerodynamic performance precisely. Housing height, however, may be designed independent of the car because the aerodynamic interference between housing height and car configuration is negligible.