• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.714-718
• /
• 2005

Knowledge management (KM) continues to receive mounting interest within the construction industry due to its potential to offer solutions for organisations seeking competitive advantage. This paper presents a KM input-process-output conceptual model comprising unique and well-defined theoretical constructs representing KM practices and their internal and external determinants in the context of construction. The paper also presents the underlying principles used in operationally defining each construct using extant KM literature, and offers a number of testable hypotheses that capture the inter-relationships between the identified constructs.

• Journal of Plant Biology
• /
• v.28 no.4
• /
• pp.329-332
• /
• 1985

A simple new device for obtaining very clear epidermal imprints for light microscopic studies is discussed. This new device is developed from“Britfix”(polystyrene cement) which is non-toxic to the plant organs. It involves direct application of the material on the desired surface of the plant organ to obtain thin, transparent replica. From the present investigation“Britfix”is found to be useful for the study of epidermal anatomy, morphology and physiology. Epidermal imprints can be mounted on the microscope slide without a mounting medium. Permanent slide of these imprints can be kept for any desired period without any deterioration of the replica.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.51-56
• /
• 2006

Use of products containing phytoecdysteroid (PE) as active principle has become popular in prominent sericultural areas of India for hastening larval maturation events and synchronizing cocoon spinning activities as an obvious advantage is assured. At times, the present recommendation of administering PE at the onset of spinning results in peak labour requirement at odd hrs. To enable making recommendation for the use of PE on $multi{\times}bivoltine$ silkworm hybrids based on the climatic conditions prevailing in different areas especially with regard to temperature, the experiment was taken up to determine proper treatment times so that the induced spinning will be more orderly and the labour can be leveraged more efficiently. Different brackets of low ($18-22^{\circ}C$), medium ($24-28^{\circ}C$) and high ($29-32^{\circ}C$) temperature were simulated during the latter half of V larval instar and cocoon spinning. PE was administered to $multi{\times}bivoltine$ silkworm ($BL67{\times}CSR101$) hybrid batches as per the recommended dose at three different times viz., 10 am, 4 pm and 10 pm. Three replicates of 100 larvae were maintained for each treatment. Absolute controls were also maintained in each temperature range to compare the results. Cumulative maturation percentage was recorded at 6 hrs interval to ascertain peak mounting span. The influence of the treatment on the cocoon traits also was studied. Based on the peak mounting span, it was evident that in low temperature 10 pm treatment would be better. In medium and high temperature, treatment at 4 pm proved to be a better option. The influence of the treatment times at different temperature range on labour management is discussed.

• Korean journal of applied entomology
• /
• v.47 no.4
• /
• pp.487-490
• /
• 2008

Field collected larvae inside the pumpkin fruit in Jinan, Chonbuk Province were kept in the laboratory at $24{\pm}2^{\circ}C$, RH $65{\pm}5%$, and 14L:10D until they pupated and eclosed. Adults were fed with dry-milk based diet. Mating behavior was observed when they were 40 days old in a field cage at dusk in July and October, 2008. Wing vibration in male took place under the light intensity of 200 lux-20 lux, however, most commonly under 30 lux. Mounting between male and female was observed under 150 lux-30 lux after the act of wing vibration, also most frequently under 30 lux. Copulation occurred under 150 lux-20 lux. Females approached face to face to males which had been engaged in wing vibration and the copulation was successful for up to 64%. Copulation never occurred when a female positioned in front or at side of the male that was not engaged in wing vibration.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2064-2071
• /
• 2020

For proton pencil beam scanning (PBS) technology, the accuracy of the dose distribution in a patient is sensitive to the properties of the incident beam. However, mechanical deformation of the proton therapy facility may occur, and this could be an important factor affecting the proton dose distribution in patients. In this paper, we investigated the effect of deformation on an SC200 proton facility's beam isocenter properties. First, mechanical deformation of the PBS nozzle, L-shape plate, and gantry were simulated using a Finite Element code, ANSYS. Then, the impact of the mechanical deformation on the beam's isocenter properties was evaluated using empirical formulas. In addition, we considered the simplest case that could affect the properties of the incident beam (i.e. if only the bending magnet (BG3) has an error in its mounting alignment), and the effect of the beam optics offset on the isocenter characteristics was evaluated. The results showed that the deformation of the beam position in the X and Y direction was less than 0.27 mm, which meets the structural design requirements. Compared to the mechanical deformation of the L-shape plate, the deformation of the gantry had more influence on the beam's isocenter properties. When the error in the mounting alignment of the BG3 is equal to or more than 0.3 mm, the beam deformation at the isocenter exceeds the maximum accepted deformation limits. Generally speaking, for the current design of the SC200 scanning beam delivery system, the effects of mechanical deformation meet the maximum accepted beam deformation limits. In order to further study the effect of the incident beam optics on the isocenter properties, a fine-scale Monte Carlo model including factors relating to the PBS nozzle and the BG3 should be developed in future research.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.1
• /
• pp.26-32
• /
• 2015

Purpose: The main purpose of this study is to suggest application plan of dipping method by comparing & analysing the difference between addition method and dipping method in the manufacture of metal-ceramic substructure of maxillary central incisor (#1), followed by assessing the work efficiency. Materials and Methods: Master die and hard plaster-copied one were produced and then a total of 20 copies, 10 copies for each through addition method and dipping method, were manufactured and experimented. Copings were fixed on the abutment model and invested in epoxy mounting cup. Samples were cut in labial and lingual direction, using cutter and then rubbed on sandpaper, whose 4 points were measured by using digital microscope. Results: The comparison of mean values by using t-test, parametric statistical method, shows overall significant difference (P < 0.05). Conclusion: The result of this study can be suggested as an application plan, since there is no significant difference between addition method and dipping method in the manufacture of metal-ceramic substructure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8350-8356
• /
• 2015

The demand for user convenient devices in automotive applications are fast growing, mainly driven by the customer's requirement for higher efficiency and more features. In important such feature is the cold module for cars, which are convenient luxuries that warm or cool drinks placed in the cup holder by means of a thermoelectric element. In present study, we would like to find out the optimal thickness of the cup holder and mounting position of the thermoelectric element through experiments under various testing conditions and thermal analysis. The resulting thermal distribution of the primary area of thermal analysis was found to be lowest when the thickness was 2.5 mm. The temperature distribution was also lowest when the thermal element was positioned underneath the holder (A-type).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.645-651
• /
• 2012

In this paper, we propose a new method for stabilizing the image captured from a camera mounted on a buoy robot. In this study, in order to solve the problem of cumulative errors and noise produced by a general gyro sensor measuring the orientation angle of the buoy robot, we propose new method for stabilizing the image. In this method, image processing techniques are combined with a newly designed target mounting mechanism that adapts to wave fluctuations. New target extraction and angle estimation techniques are introduced, along with the new mounting mechanism used for the camera and the target, which produce a stabilized image even if the buoy robot is on fluctuating waves.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.335-342
• /
• 2020

Tailless aircraft designed for stealth efficiency uses spoilers instead of rudders for the directional control. When the spoiler is rapidly deployed, highly nonlinear and unsteady aerodynamic characteristics can be generated, resulting in adverse effects on aircraft flight performance. This paper investigates the aerodynamic characteristics of an airfoil with moving spoiler using dynamic mesh CFD technique. The effects of spoiler operation speed, mounting location, and deployment scheduling are analyzed to reduce the adverse effects of the spoiler's dynamic operation. The results shows that the adverse effects of dynamic spoiler can be reduced by appropriate selection of the spoiler mounting location and deployment scheduling.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.74-78
• /
• 1986

The experiments were carried out to investigate the effect of humidity on the cocoon quality, and 4, 000 lots of cocoon pruduced fot five years in Chin yang, Ha dong, Keo chang, San chung of Kyeong nam, and Sun san, Sang ju, Young poong, An dong of Kyeong buk were analyzed. The results were summarized as follows ; 1. The reelability ration, the bave length, and raw silk ration were decreased with increasing the humidity in mounting time, and it was remarkably observed when the relative humidity was over 80%. 2. With increasing the reelability ration, the bave length, and raw silk ration were increased, and the longer the bave lenger the bave length was the higher raw silk ration obtained. 3. The average reelability ration for five years in autumn-rearing period was higher than that in spring-rearing period, but the bave length and raw silk ratio was on the contrary from the above. 4. The reelability ration of cocoon produced in the mountainous area was higher than that in the field area but the shorter the bave length, the raw silk ration had no significant difference between those.