• 소음진동
• /
• 제11권1호
• /
• pp.36-40
• /
• 2001

In this paper, an integrated system for dynamic analysis and optimal design of engine mount systems is presented. The system can simulate static and dynamic behaviors of engine mount systems and optimize design parameters such as mount stiffness, mounting locations with desired design targets of frequency or displacement. A FF-engine with an automatic transmission is used to demonstrate the analysis and optimal design capabilities of the proposed design system.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.141-147
• /
• 2000

For miniaturization of electronic parts and higher productivity, part arrangement job of PCB(printed Circuit Board) has been replaced with complete automated facilities, and contribution which is concerned about this will be expanded continuously. Such part arrangement job of PCB could have lots of influences to entire productivity In this paper, effective grouping method of parts is suggested for the effective insertion path job of PCB concerning the constraints to the size of parts.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.284-291
• /
• 2003

농산물은 수확된 후부터 계속해서 호흡, 증발, 대사작용을 계속한다. 이런 제반 활동에 기인된 품질손실을 수송과정에서 회복시킬 수는 없으며 단지 농산물은 자체내의 대사작용에 의해서만 에너지를 공급받아 품질을 유지해야 한다. 수확 직후부터 농산물은 세포의 부패로 인해 품질이 저하되기 시작하며 저장기간이 줄어들게 된다 결국 농산물은 수송하고 처리하는 동안의 온도변화, 수분감소, 가스발생 빈도, 물리적 손상, 위생상의 문제 등에 노출된다. (중략)

• 소음진동
• /
• 제1권1호
• /
• pp.39-43
• /
• 1991

In this study, the design concept of engine for 4WD vehicle is established by the experimental modal analysis. First, the relationships between frame and power transmission system are considered. Second, the effect of additional system (Front propeller shaft and Exhaust system) on the power transmission system is evaluated. As a result, it is desirable that of frame and power transmission system is shifted by the additional system. This is cause by the moment of inertia of the additional system, because the center of gravity location of the additional system is far from that of the power transmission system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1155-1158
• /
• 2007

To reduce acoustic noise level of an AV projector, primary noise sources of AV projector were analyzed. Based on the analyzed result, methods to control each source are presented and tried. Structure-borne noise can be controlled by anti vibration design of mounting system, and air-borne noise by reducing flow resisitvity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.304-307
• /
• 1993

In this paper, we formulate Kalman filter for calibration of strapdown inertial measurment unit(SDIMU) on navigation system level and analyize its performance by covariance simulation method. It has been shown that the calibration method suggested in this paper is not largely influenced by accuracy of a mounting axis alignment required in calibration of SDIMU on IMU level.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.238-242
• /
• 1994

Shuster's algorithm for spin-axis determination is extended to include sensor bias and mounting angle as its solve-for parameters. The relation between direct and derived measurements bias is obtained by linearizing their kinematic equations. A one-step least-square estimation technique referred to as the 'closed form' solution is used, and the solution provides a more refined and decent initial guess for the subsequent filtering process contained within the differential correction module. The modified algorithm is applied for attitude determination of a GEO communication satellite in transfer orbit, and its results are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1299-1301
• /
• 2006

A visual display is formed by picture elements, which are optically coupled to optical pathways through which light is supplied from light sources. Light sources, controlled by control hardware, transmit light to the optical pathways by scanning light from the light sources to different optical pathways. The light sources and the optical pathways are mutually oriented so that light from the light sources can be canned to different optical pathways to form the displayed image. Light sources can be mounted to a rotating mounting that rotates past static pathways that transmit coupled light to the waveguide screen.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.18-22
• /
• 2009

In this paper, we are develop specifications light-way lighting appliance for efficient construction. Analyzed wide application and connection regulation. Also, flickering circuit Presented separation, arrangement, mounting instruction. Incandescent lamp occurs much heat. Therefore, establishment of enough electric light interval is required. Voltage of discharge lamp does by below 300v, and provide so that a person is not can may touched.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.317-321
• /
• 1989

The FIC(Flat Integrated Circuits)is widely used for good productivity but very difficult for visual identification. The required position tolerance is 0.05mm and orientation tolerance is 0.25 degree for assembly. The research was performed to detect FIC defects and to estimate the placement of FIC within the tolerances. In this study an automatic visual system is developed, which can successfully perform a fine assembly operation using the cartesian robot.