• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.474-478
• /
• 2001

본 논문에서는 선박에서 제공하는 전동기의 절연저항 및 전류를 상시 검출하여 진단을 행하는 진단 시스템을 제안한다. 선박공 전동기는 상시 해풍ㆍ기름 등의 오염물질에 노출되어있기 때문에 절연저항의 감소, 과전류 등의 문제점이 야기될 수 있다. 이러한 문제는 선박의 안전항해에 막대한 영향을 주어 크나큰 인명과 재산상의 손실을 초래하게된다. 제안된 진단장치는 전동기의 절연저항 및 전류를 연속적으로 감시할 뿐만 아니라 제어실에서도 데이터를 획득찬 수 있도록 설계한다. 제안된 방법의 타당성을 3상 유도전동기를 대상으로 확인한다.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.68-76
• /
• 2007

It is strongly requested to reduce fuel consumption because of high oil price and exhaust gases of road vehicles for environmental preservation. To solve these problems, several types of hybrid vehicles have been developed. Among them, flywheel hybrid vehicle using variable displacement pump/motor was already proposed as one of the feasible hybrid systems in place of hybrid vehicle by the conventional storage battery. The proposed flywheel hybrid vehicle is to keep constant pressure of high pressure line by the control of swash plate angle of flywheel pump/motor as pressure compensator. The efficiency of the overall system depends severely on the efficiency of hydraulic pump/motor in the energy saving hydraulic control system by simulation. According to the control methods of swash plate angle of piston pump/motor, there remain several problems to be solved. In this paper, experimental setup for energy saving is fabricated and the efficiency of energy saving is investigated by experiments with respect to various experimental conditions.

• 에너지공학
• /
• 제23권2호
• /
• pp.57-61
• /
• 2014

자동차산업이 해결해야 할 과제로서 석유에너지의 소비증가와, $CO_2$ 배출에의한 지구온난화, 배기가스 배출에 의한 도시부 대기오염 등에 대한 대처가 필요한 시점이다. 이들의 해법으로 시장에서 높은 평가를 받고 있는 전기자동차의 필요성이 대두되고 있다. 본 연구에서는 전기자동차 모터, 배터 리 및 구동모터를 포함한 고전압 핵심부품들의 효율적인 열관리 기술, 배터리 및 구동모터의 열관리 기술 및 개발동향을 알아보고자 한다.

• Tribology and Lubricants
• /
• 제38권2호
• /
• pp.53-62
• /
• 2022

This study presents experimental measurements of the rotordynamic performance of a motor-driven small turbocompressor supported by gas beam foil journal bearings (GBFJBs) and compares the test results with the predictions of a computational model. The experiments confirmed that the rotational synchronous frequency component dominates the behavior of the overall rotor vibrations, whereas the nonsynchronous components are insignificant, indicating the rotor-bearing system remains stable up to 100 krpm. The undamped natural frequency and imbalanced response of the rotor-bearing system are predicted when integrating the finite element model of the rotor-bearing system with the predictions of the bearing dynamic coefficients. The results are in good agreement with the experimental results. In addition, base excitation test results show that the small turbocompressor can endure large external forces and demonstrate limited rotor amplitudes. A simple single degreeof-freedom rotor model using the nonlinear stiffness of the GBFJBs can effectively predict the test results.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.536-540
• /
• 2018

엔진의 성능이 향상될수록 엔진 내부에서 연소되는 연료의 양이 증가하고 그에 따라 엔진의 온도는 증가하게 된다. 특히 피스톤 헤드의 경우 냉각이 어려우므로 피스톤 헤드의 온도가 높아지게 된다. 그러나 피스톤 헤드의 온도가 너무 높게 되면 피스톤 헤드 표면에서 이상 연소가 발생하기 쉬워 토크 저하 및 엔진 파손과 같은 결과를 가져온다. 피스톤 헤드의 온도를 낮게 하기 위하여 오일을 피스톤 헤드 하단부로 분사하는 오일 제트가 사용되는데, 본 연구에서는 오일 제트에 의한 피스톤 헤드 냉각 효과를 확인하기 위하여 템플러그를 사용하여 엔진 작동시 피스톤 헤드의 온도를 측정하였다. 템플러그는 일종의 센서로 피스톤 헤드의 온도에 따라 템플러그의 경도가 변화하여 변화된 경도를 이용하여 피스톤 헤드의 온도를 측정한다. 템플러그를 사용하여 피스톤 헤드의 최고 온도를 오일 제트가 없는 상태와 설치된 상태에서 측정하였다. 오일 제트가 설치됨에 따라 피스톤 헤드의 온도는 변화되었다. 최고 온도 부위가 중앙부위에서 전후부위로 변경되었다. 또한 피스톤 헤드 내에서 온도 편차가 감소하여 좀 더 균일한 피스톤 헤드 온도 분포를 얻을 수 있었다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.123-133
• /
• 2014

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of improving the lubricating system to lubricate cylinder parts optimally by an electronically controlled quill device according to changes of engine load and revolution speed. In order to apply the developed accumulating distributor to an integrated cylinder lubricator by the electronically controlled system as the third research stage, the lubricating system is improved in the electronically controlled quill device with a solenoid valve. In this study, the effects of lubricator revolution speed, driving pressure(or plunger stroke) and cylinder back pressure on oil feed rate and lubrication inequality rate are investigated by using the integrated cylinder lubricator system with an accumulated distribution by the electronic control(I.C.S.), and the oil feed rate and lubrication inequality rate of I.C.S. are compared with those of the motor-driven cylinder lubricator by the electronically controlled quill system equipped with an accumulating distributor(E.D.S.). It is found that the oil feed rate of I.C.S. is smaller than that of E.D.S. due to the reduction of delivery velocity by the higher delivery pressure, and the variances of lubrication inequality rate for I.C.S. have become smaller than those of E.D.S. as the driving pressure in all experimental conditions increases, except for the driving pressure of 26 bar(plunger stroke 2 mm) at the cylinder lubricator speed of 120 rpm.

• 열처리공학회지
• /
• 제36권5호
• /
• pp.311-317
• /
• 2023

An autofilter is a device that removes impurities contained in heavy fuel oil used in diesel engines of ships or power plants, and also automatically removes impurities accumulated in the filter through a reverse washing function. The reducer-integrated motor serves to rotate the filter at low speed to enable reverse automatic cleaning in the autofilter device. To achieve a low speed of 0.65 to 0.75 rpm in a reducer-integrated motor, a small motor that can operate at 97rpm at a rated voltage of 110 V and 112.5 rpm at 220 V is required. Additionally, a large gear ratio of 1/150 is required. To ensure the durability and reliability of these reducers, the strength of the gear must be evaluated at the design stage. In general, there is a limit to evaluating the stress and strain state according to the vibration characteristics acting on each gear in the driving state of the reducer through quasi-static analysis. Therefore, in this study, the operation characteristics of the auto filter's reducer-integrated motor were first analyzed using the rigid body dynamics analysis method. Then, this rigid body dynamics analysis model was extended to a flexible multibody dynamics analysis model to analyze the stress and strain states acting on each gear and evaluate the design feasibility of the gear.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.257-258
• /
• 2002

The surface morphology of oil-lubricated surface for hydraulic piston motor is believed to be extremely effective in contact mechanics. adhesion. friction and wear. In order to describe morphology of various rubbed surface on driving condition, the wear test was carried out under different experimental conditions in oil-lubricated system. And fractal descriptors was applied to rubbed surface of hydraulic members with image processing system. These descriptors to analyze surface structure are fractal dimension. Surface fractal dimension can be determined by sum of intensity difference of surface pixel. Morphology of rubbed surface can be effectively obtained by fractal dimension.

• 항공우주시스템공학회지
• /
• 제4권2호
• /
• pp.16-20
• /
• 2010

In General, the hydraulic system of T-50 Advanced Trainer is applied to flight control system, wheel & Brake system and fuel system for aircraft operation. The hydraulic system is operation with pressure of 3000psi. and many mechanical parts which is operated by hydraulic system has been stressed in incomplete environment same as heat and friction. for example, Oil leakage had occurred in the shutoff valve of FFP used in a certain period of time. After study, The crack progressed by fatigue due to the irregular hydraulic pressure and vibration has been identified as the reason of oil leakage. This paper presents life cycle extension plans of FFP shutoff valve by configuration improvements of shutoff valve and FFP hydraulic motor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.99-103
• /
• 1991

본 논고에서는 Radial 및 Axial 하중을 동시에 받을 수 있고, 예압에 의해 주축강성을 증대시킬수 있으며, Ball수의 증가로 부하능력을 향상시킨 초정 밀.초고속용 Angular ball bearing을 조합 사용하고, 고속회전에 지금까지 개 발된 ball bearing 윤활방법 중 가장 효과적인 간헐적인 oil 공급과 air 압력 으로, 계속 ball을 냉각, 윤활시켜주는 air oil 윤활법의 채용과, 국내 공작기 계 제조회사들이 주로 사용하는 일본 FAMUC AC Spindle motor(FAMUC-H type : 8000-15000rpm)를 사용해서 초고속 주축의 최적 설계조건을 제시하기 위한 기초연구 단계로 MT40-12000rpm 급의 Machining center용 Cartridge type의 Spindle unit개발을 통해서 주축설계에 따른 문제점과 연구용 주축제작의 생산 기술적 문제점 및 진동특성을 검토 하고자 한다.