• 한국항공우주학회지
• /
• 제46권5호
• /
• pp.393-401
• /
• 2018

고체 로켓 추진기관에서 우발점화를 방지하기 위해 사용하는 전자식 점화안전장치의 신뢰도 예측에 관하여 연구하였다. 신뢰도 예측을 위해 가장 먼저 점화안전장치의 주요 구성품(점화회로, 고전압 기폭관, 격벽착화기)을 정의하고, 각 구성품의 작동원리에 대해 시스템 분석을 수행하였다. 시스템 분석을 통해 선별된 입력 변수를 이용하여 각 부품의 성능 모델링을 수행하였으며, 복잡한 해석이 필요한 경우 반응표면기법을 이용하여 다항식으로 근사하였다. 마지막으로 만들어진 성능 모델링을 기반으로 몬테칼로 시뮬레이션을 적용하여 설계 신뢰도를 예측하였다.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.572-581
• /
• 2014

A design and control method of DC/DC converter, which can control variable DC-link voltage to drive a fuel cell electric vehicle (FCEV), is proposed in this study. Given that a fuel cell has low-voltage and high-current characteristics, the required voltage for operating motor must be output through the DC/DC boost converter in the system to drive an FCEV. The proposed converter can choose the output voltage of battery or fuel cell in consideration of the driving mode, as well as control DC-link voltage in accordance with the back electromotive force. The switching lag-time to prevent shortage of pulse-width modulation inverter arms makes distorted current waveform caused by voltage distortion. Through this control method, the proposed converter can reduce the output voltage distortion and current ripple of the inverter, thereby reducing the distorted torque. Simulations and experimental results are presented to verify the reliability of the proposed DC/DC converter.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.83-90
• /
• 2010

The windshield wiper consists of 4 parts: a blade, an arm, a linkage and a motor. The wiper blade makes contact with the windshield and is designed to be operated normally at an angle of 30~50 degrees to the front glass. If the contact pressure between the wiper blade and windshield surface is too high, noise and wear of the rubber will result. On the other hand, if the contact pressure is too low, the performance will do badly, since foreign substances such as dust and stains will not be removed well. The pressure and friction of the wiper blade has a great influence on its effectiveness in cleaning the front window. This is due to the contact of the rubber with the window. This paper presents the dynamic analysis method to estimate the performance of the flat type blade of the wiper system. The blade has a nonlinear characteristic since the rubber is an incompressible hyper-elastic and visco-elastic material. Thus, Structural dynamic analysis using a complex contact model for the blade is performed to find the characteristics of the blade. The flexible multi-body dynamic model is verified by the comparison between test and analysis result. Also, the optimization using the central composite design table is performed.

• 한국소음진동공학회논문집
• /
• 제23권1호
• /
• pp.65-72
• /
• 2013

This case study presents a practical method to reduce resonant vibration of large vertical pumps. The pumps are driven at 400 rpm rated speed by induction motor. The vibration was not significantly large when operated at this rated speed. Large vibration was occurred when the pump was operated below the rated speed for flow control. Due to the large vibration resonance, variable speed operation of the pump was not possible for several months at worst cases. To find an efficient vibration control method, the flexural responses of pumps for both normal and transient operations were measured. The measured modal characteristics were compared with those of finite element analysis. When the pump was operated at a specific rpm, the natural mode whose resonance frequency is twice the rotating angular speed induced the large vibration. The retrofit utilizing stiffeners to reduce this resonant vibration were performed. Effects of designed stiffeners on reducing vibration were validated through tests after actual installation.

• Physical Therapy Rehabilitation Science
• /
• 제9권3호
• /
• pp.165-170
• /
• 2020

Objective: To investigate the association between one-leg standing ability and postural control for chronic hemiparetic stroke. Design: Cross-sectional study. Methods: Forty individuals who had a first diagnosis of stroke with hemiparesis before six months and over had participated in this study. To analyze the relationship between one-leg standing ability and postural control in the participants, six clinical measurement tools were used for assessment, including the Timed-Up-and-Go (TUG) test, Berg Balance Scale (BBS), Dynamic Gait Index (DGI), Fugl-Meyer Assessment (FMA), 5 times sit-to-stand (5TSTS) and one-leg standing (OLS). Results: After analyzation, the OLS scores in the more-affected side showed significant positive correlations with BBS scores (r=0.469, p<0.01), DGI scores (r=0.459, p<0.01).and FMA scores (r=0.425, p<0.01). The OLS scores in the more-affected side showed significant negative correlations with TUG score (r=-0.351, p<0.05). The OLS score in the less-affected side showed significant positive correlations with BBS scores (r=0.485, p<0.01), DGI scores (r=0.488, p<0.01) and FMA score (r=0.352, p<0.05). The OLS scores in the less-affected side showed significant negative correlation with TUG scores (r=-0.392, p<0.05) and 5TSTS (r= -0.430, p<0.01). The OLS scores in the more-affected side showed significant positive correlations with the OLS scores in less-affected side (r=0.712, p<0.01). Conclusions: The results of the study suggest that the OLS time may be moderately correlated with static and dynamic postural stabilities and motor recovery following stroke. This study also suggests that the OLS test is as a simple clinical tool for predicting postural control performance for individuals with chronic hemiparetic stroke.

• 환경위생공학
• /
• 제12권3호
• /
• pp.41-49
• /
• 1997

In South Korea since 1970s the rapid development of economic growth has brought about "Urbanization" in many areas and also raised the level of people's life in many ways. At the same time, however, the industrialization and overpopulated districts in many areas have caused the problems of air pollution in necessary. Among those air pollution, in particular, in large cities has become more serious since 1990s than before. Air pollution, like TSP and SO$_{x}$ caused by heating, generation of electric power and industrialization in 1980s, showed as that of the type of an underdeveloping country and was not hazardous enough to people in the least. Unfortunately, in 1990s NO$_{x}$, CO and O$_{3}$ caused by the soaring numbers of many types of cars have exhausted air pollutant more hazardous as the same air pollution type of many developed countries. So, the purpose of this study would be to analyze the changes of concentration of NO$_{x}$ and CO on environmental air by traffic volume and from the side drive way to the degree of distance in Sungnam City, and recognize the citizens' consciousness to air pollution and suggest the best walking point in part, and plan to design the reasonable use of cars and finally make the air quality improve toward the better-ment in part. From the research result we can know that people walking in the street would be protected from the hazardous air pollutant caused by the cats if they walk apart from a drive way as far as they can in the street. Accordingly, it might, to minimize th affect of air pollution, be thought to be desirable that the consideration of in introduction the system that the vehicle using the diesel engine motor should use the centered-lane aparted from road. Another to be desirable is that along side the road, the trees inhaled the pollution should be planted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.933-937
• /
• 2002

The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material in comparison with conventional metal vessels can be applied in the field where lightweight and the high pressure are demanded from the defense and aerospace industry to rocket motor case due to the merits which are energy cutdown the weight reduction and decrease of explosive damage preceding to the sudden explosion which is generated by the pressure leakage condition). In this paper, for nonlinear finite element analysis of E-glass/epoxy filament winding composite pressure vessel receiving an internal pressure, the standard interpretation model is developed by using the ANSYS, general commercial software, which is verified as the accuracy and useful characteristic of the solution based on Auto LISP and ANSYS APDL. Both the preprocessor for doing exclusive analysis of filament winding composite pressure vessel and postprocessor that simplifies result of analysis have been developed to help the design engineers.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.599-607
• /
• 2011

본 논문에서는 별도의 외부 격리 구조물이나 추가 모터가 필요 없는 XY 선형 모션 스테이지를 위한 반발력 보상 시스템을 개발하였다. 개발된 시스템은 이동 가능한 마그넷 트랙, 스프링, 추가 질량을 포함한 자체 반발력 보상 구조를 가지고 있으며 이송용 모터 코일과 마그넷 트랙의 상대 위치를 검출할 수 있는 전용 센서를 개발하여 고정밀 추력 및 위치를 제어에 적용하였다. 먼저 반발력 보상 시스템을 모델링하고 모의 시험을 통해 이동 거리, 가속도, 하중, 허용 가능한 장비 크기와 같은 설계 요소를 최적화 하였다. 반발력 보상 시스템이 구비된 XY 모션 스테이지를 제작하였으며, 해당 시스템의 성능을 실험적으로 검증하였다. 실험결과 10m/$s^2$ 가감속 시에 85%의 반발력이 반발력 보상 시스템에 의해 흡수되었다.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1483-1490
• /
• 2011

전동기 일체형 유압액추에이터(EHA)는 전기모터와 직결되어 구동되는 유압펌프를 이용하여 유압 피스톤의 변위나 속도를 제어할 수 있도록 모듈화된 유압기기로 효율이 높고 독립된 동력원을 갖는 장점으로 인하여 항공기의 전자구동시스템에 적용되어 왔다. 최근에는 다양한 형태의 유압시스템이 적용되고 있는 건설중장비 분야에서 엔진과 전기모터를 결합한 하이브리드 기술이 개발됨에 따라 EHA의 활용범위가 확대될 것으로 예상된다. 본 연구에서는 편로드 유압실린더를 갖는 EHA가 적용된 유압시스템을 대상으로 펌프작동에 따른 유압실린더의 기동 및 정지특성을 고찰하기 위하여 EHA 내부 유압회로의 기능을 파악하고 동특성 모델을 유도하였으며 파일럿작동 체크밸브의 크래킹압력을 분석하여 개방 및 폐쇄특성을 예측하였으며 시뮬레이션을 통하여 분석된 결과를 검증하였다.