• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.518-528
• /
• 2022

Virtual Reality (VR) has been widely used in various applications to generate realistic virtual environments. A sense of immersion can be increased by providing additional stimuli such as tactile sensation to VR contents. However, it is still challenging to provide a realistic feel for the wind blowing over the whole body by smoothly controlling the airflow. To address this issue, we employ a household electric fan as a wind generating device to provide users with wind experience in VR environments. The wind generating device targets the whole body to mimic the wind we feel outside in our daily life. To do so, we present a low-cost method to smoothly control household fan speed using an Arduino microcontroller. Here, we use the Sinusoidal Pulse Width Modulation (SPWM) technique to generate the sinusoidal voltage required to drive the fan motor. Our experimental results show how Variable Voltage Variable Frequency (VVVF) is implemented at a low cost using our method for household fan speed control. The results can be applied to various VR applications to enhance the sense of immersion by providing users with realistic wind.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.746-757
• /
• 2021

To investigate the mechanism of friction-induced vibration and noise of ship water lubricated stern bearings, a two-degree-of-freedom (2-DOF) nonlinear self-excited vibration model is established. The novelty of this work lies in the detailed analysis of influence of different parameters on the stability and nonlinear vibration characteristics of the system, which provides a theoretical basis for the various friction vibration and noise phenomenon and has a very important directive meaning for low noise design of water lubricated stern bearings. The results reveal that the change of any parameter, such as rotating speed of shaft, contact pressure, friction coefficient, system damping and stiffness, has an important influence on the stability and nonlinear response of the system. The vibration amplitudes of the system increase as (a) rotating speed of shaft, contact pressure, and the ratio of static friction coefficient to dynamic friction coefficient increase and (b) the transmission damping between motor and shaft decreases. The frequency spectrum of the system is modulated by the first mode natural frequency, which is continuous multi-harmonics of the first mode natural frequency. The response of the system presents a quasi-periodic motion.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2022

Recently, photovoltaic (PV) systems have been gradually applied in eco-friendly vehicle applications to improve fuel economy. The relevant market is expected to continue to grow because the installation of large-capacity PV systems to other eco-friendly vehicles, such as electric buses and trains, is being considered. However, in a PV system, power imbalance between submodules and low power generation efficiency occur due to factors such as cell aging, contamination, and shading. To resolve this problem, various differential power processing (DPP) converters have been researched and developed. However, conventional DPP converters suffer from large volume and low efficiency. Therefore, to apply DPP converters to eco-friendly vehicles, increasing efficiency and reducing volume and price compared with existing DPP converters is necessary. In this paper, a novel DPP converter with an integrated transformer is proposed and analyzed. The proposed DPP converter uses a single magnetic component by integrating transformers and secondary sides of conventional DPP converters. Therefore, the proposed DPP converter shows high power density and high efficiency, and it is suitable for PV systems in eco-friendly vehicle applications.

• Earthquakes and Structures
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2023

A model for calculating structure interacted mechanics is proposed. A structural interaction model and controller design based on tuned mass damping (TMD) was developed to control the induced vibration. A key point is to introduce a new analytical model to evaluate the properties of the TMD that recognizes the motion-dependent nonlinear response observed in the simulations. Aiming at the problem of increased current harmonics and low efficiency of permanent magnet synchronous motors for electric vehicles due to dead time effect, a dead time compensation method based on neural network filter and current polarity detection is proposed. Firstly, the DC components and the higher harmonic components of the motor currents are obtained by virtue of what the neural network filters and the extracted harmonic currents are adjusted to the required compensation voltages by virtue of what the neural network filters. Then, the extracted DC components are used for current polarity dead time compensation control to avert the false compensation when currents approach zero. The neural network filter method extracts the required compensation voltages from the speed component and the current polarity detection compensation method obtains the required compensation voltages by discriminating the current polarity. The combination of the two methods can more precisely compensate the dead time effect of the control system to improve the control performance. Furthermore, based on the relaxed method, the intelligent approach of stability criterion can be regulated appropriately and the artificial TMD was found to be effective in reducing cross-wind vibrations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.399-400
• /
• 2010

산업의 발전과 경제성장을 바탕으로 대한민국의 자동차 등록수는 매년 꾸준한 증가세를 보이고 있다. 이와 더불어 자동차 사고 또한 급격히 증가하고 있다. 대한민국은 OECD회원국중 교통사고 발생건수가 높은 편이고 사망자수 또한 상위에 랭크되어 있다. 이러한 사망자 수는 각 나라별 교통사고 발생건수 대비 사망자수와 비교시 높은 사망률을 보이고 있다. 또한 자동차 충돌 사고에서 빈번히 발생되는 운전자의 의식불명에 따른 초기 응급조치의 미흡, 뺑소니 또는 사고 후 방치되는 상황을 방지하기 위해 차량용 블랙박스와 사고발생 통보 시스템이 필요하다. 본 논문에서는 가속도센서를 이용하여 사고 발생시 충격 임계점을 계산한 후 사고 발생을 블루투스를 이용하여 스마트폰으로 전송한다, 또한, 교통사고 발생 후 환자의 응급 후송 및 2차 교통사고를 방지하기 위한 시스템의 필요성에 따라 블랙박스를 접목한 차량용 응급상황 감지 및 통보 시스템을 설계 및 구현하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.626-629
• /
• 2021

Recent home appliances requires convenience and low-power consumption. A convenient devices should be simple to control while having several functions. Intelligent sensors and utilization technologies are required to reduce energy consumption. This paper provides a smart drying system with Bluetooth communication function and energy reduction function. Design a control system that uses the Bluetooth function so that the smartphone monitors the drying control and the internal humidity condition. By detecting the humidity inside the dryer and controlling the speed of the motor, it has an energy-saving function.

• Advances in concrete construction
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2023

Concrete is one of the most widely used structure materials. Concrete is like the motor of the construction industry. The remarkable feature of this Concrete is its cheapness and low energy consumption. Concrete alone does not show resistance against any force but only against compressive forces. Therefore, steel rebar product is used as a reinforcement and increase the strength of Concrete. It can be done by putting rebar in Concrete in different ways. Rebar rusting is one of the crucial symptoms that cause swift destruction in reinforced structures-factors such as moisture in concrete increase the steel corrosion rate. In most cases, it is difficult to compensate for the damage caused by the corrosion of base metals, so preventing corrosion will be much more cost-effective. Coatings made with nanotechnology can protect Concrete against external degradation factors to prevent water and humidity from penetrating the Concrete and prevent rusting and corrosion of the rebar inside. It prevents water penetration and contamination into the Concrete and increases the Concrete's quality and structural efficiency. In this research, silica and titanium dioxide nanoparticle coatings have been used due to their suitable electrical and thermal properties, resistance to oxidation, corrosion, and wear to prevent the corrosion of rebars in Concrete. The results of this method show that these nanoparticles significantly improve the corrosion resistance of rebars.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.1305-1307
• /
• 2022

자동차 부품의 결함은 시스템 전체의 성능 저하 및 인적 물적 손실이 발생할 수 있으므로 생산라인에서의 불량 검출은 매우 중요하다. 따라서 정확하고 균일한 결과의 불량 검출을 위해 딥러닝 기반의 고장 진단 시스템이 다양하게 연구되고 있다. 하지만 제조현장에서는 정상 샘플보다 비정상 샘플의 발생 빈도가 현저히 낮다. 이는 학습 데이터의 클래스 불균형 문제로 이어지게 되고, 이러한 불균형 문제는 고장을 판별하는 분류 모델의 성능에 영향을 끼치게 된다. 이에 본 연구에서는 모터의 동작음으로부터 불량 모터를 판별하는 불량 검출 시스템 설계를 위한 데이터 불균형 해결 방법을 제안한다. 자동차 사이드 미러 모터의 동작음을 학습 및 테스트를 위한 데이터 셋으로 사용하였으며 손실함수 계산 시 학습 데이터 셋의 클래스별 샘플 수 가 반영되는 label-distribution-aware margin(LDAM) loss 와 Inception, ResNet, DenseNet 신경망 모델의 비교 분석을 통해 불균형 데이터를 처리할 수 있는 가능성을 보여주었다.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.87-92
• /
• 2023

As the elderly population increases, the number of patients with various joint diseases, including degenerative arthritis, is steadily increasing. CPM medical devices are needed to effectively treat degenerative arthritis that is common in the elderly population. Domestic CPM medical devices have limited functions and are highly dependent on imports for expensive imported medical devices. To solve this problem, we designed a ROM measurement function using a current sensor that is not present in existing composite joint CPM medical devices. The algorithm was designed using the fact that the force caused by joint stiffness greatly increases the current flowing through the DC motor. In addition, the need for digital healthcare in the medical field is gradually expanding as the proportion of chronically ill patients increases due to the spread of the non-face-to-face economy due to COVID-19 and the aging population. Therefore, this paper aims to improve the performance of CPM medical devices by allowing real-time confirmation of rehabilitation exercise information and operation range measurement results in accordance with digital healthcare trends through a Bluetooth application developed as an Android studio.

• Asia-Pacific Journal of Business
• /
• v.14 no.3
• /
• pp.149-166
• /
• 2023

Purpose - This study aimed to examine the influence of various factors on customer satisfaction and the continuance usage intention, based on the purchasing type of smart speaker users. Design/methodology/approach - Data was gathered through surveys, collecting responses from 180 smart speaker users in Korea. Structural equation modeling was utilized to analyze the data. Findings - Both perceived usefulness and perceived security were observed to have a significant positive impact on customer satisfaction across all user groups. Moreover, perceived ease of use and perceived versatility showed a significant positive effect on the continuance usage intention. Notably, for those who acquired the smart speakers for free, perceived usefulness had a positive impact on the continuance usage intention. Conversely, for those who made a paid purchase, perceived versatility played a significant role in driving customer satisfaction. Research implications or Originality - This research offers insights into the Korean smart speaker market, a unique environment where local competitors thrive in the absence of giants like Amazon and Google. It provides a nuanced view of customer reactions to these innovative devices. The study further distinguishes between high-involvement (paid purchase users) and low-involvement (free acquisition users) consumers, offering a more detailed understanding of user perspectives based on their acquisition mode.