• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2087-2088
• /
• 2001

In this paper we presents a speed controller for permanent magnet synchronous motor using adaptive backstepping technique. The adaptive backstepping technique takes system nonlinearity into account in the control system design stage. The proposed control and adaptive law is proved to be asymptotically stable by the Lyapunov stability theory.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.465-468
• /
• 2004

In this paper, the properties of temperature dependence and voltage dependence of Aramid paper were studied to understand electrical characteristics, to be regarded as the excellent insulation. Aramid paper and pressboard had being applied various motor, generator. We used to Finite Elemental Method of simulation tool, and improved optimal insulating design of insulating Aramid according to calculated those.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.20-22
• /
• 2005

본 연구에서는 유도기의 사용 환경과 운전 조건을 고려하여 출력 1 [MW]급의 대형 유도기를 설계하였다. 유도기의 설계사양은 당사의 유도기 설계 프로그램(=등가회로법)을 통하여 전체적인 사양을 도출하였고, 기계 방정식과 결합된 유한요소 해석 프로그램을 이용하여 세부적인 동특성을 해석하였다. 유도기의 설계 변수는 턴수, 슬롯면적, 운전전압으로 하였고, 구동 주파수 25~60 [Hzl의 범위에서 가장 효율이 높은 유도기를 설계하였다. 해석의 타당성을 검증하기 위하여 샘플용 유도기를 제작하고 부하 시험을 수행하여 해석결과와 비교하였다. 부하 시험은 구동 주파수 25$\sim$60 [Hz]의 범위에서 부하율을 25$\sim$100 [%]로 변화시켜 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.41-43
• /
• 2005

The single-phase SRM(switched reluctance motor) has only one inductance variation and the positive torque is not generated in all section. So, the single-phase SRM can be started by itself if the rotor is placed at the positive slope of inductance variation by the starting device. In the previous study, equation of the magnetic force of the starting device at the acting point is derived. This paper describes the calculation of the magnetic force at the acting point by making an experiments.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1150-1152
• /
• 2005

This paper deals with inductance profile of linear switched reluctance motor. Inductance profile of LSRM calculate at align and unalign position using magnetic equivalent circuit method. Magnetic equivalent circuit method of this paper used method of reference[3],[4], but this method used modification on account difference of design specification Also, analysis result compares with data that is derived through an experiment, and proved validity.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.996-998
• /
• 2005

전기철도나 지하철 분야에 사용되고 있는 고속 DC 차단기의 조작부는 solenoid actuator 방식이나 motor charging 방식을 주로 채택하고 있으나 구조가 복잡하고 부품수가 많아 부피가 크다는 단점이 있다. 이에 반해 magnetic actuator 방식은 동작시간과 제어가 용이하고 부품수가 감소하여 신뢰성과 반복성이 뛰어나다. 본 논문에서는 고속 DC 차단기 조작부를 영구자석 엑추에이터(PMA)방식으로 적용하고자 영구자석(PM)의 개략적 설계 및 이를 이용한 PMA 설계를 하였고, 유한요소 해석을 통해 이들의 동작특성을 해석하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1104-1107
• /
• 2005

This paper presents a comparison of core losses for the four cases of Switched Reluctance Motors (SRM) with different winding method and switching sequence. With concentrated winding SRM, two kinds of switching sequence are considered for one-phase exciting and two-phase simultaneously exciting driving. With both distributed winding and toroidal winding, two-phase exciting driving is considered. The ratio of calculated core losses to input power is able to be used a guide or reference for deciding the winding method and switching sequence of in the initial design stage of SRM.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1108-1110
• /
• 2005

This paper presents a method for more efficient application of response surface methodology, one of the optimization methods, in optimal design of electrical devices. The proposed method is applied for improving torque performance of a prototype interior permanent magnet synchronous motor(IPMSM). In the end, the performance between the prototype and the optimized IPMSM is compared to verify usefulness of the method based on finite element analysis.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1279-1281
• /
• 2005

Generally a single-phase SRM(switched reluctance motor) has several stator and rotor poles but these are excited by one regulated current at the same time. It has only one inductance variation. It means that the positive torque is only generated in the positive slope of the inductance variation. The single-phase SRM can not be started by itself. The single-phase SRM can be started by itself if the rotor is placed in the positive slope of the inductance variation. Then, the starting device is required to place the rotor in the starting position before start. On this paper, the equation of the force requisite for the starting device is derived using by the frictional force of the rotor

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1186-1188
• /
• 2005

본 논문에서는 8극 12슬롯 내전형 BLDC 전동기를 기본 모델로 하고, 이를 자기저항법 및 유한요소법을 이용하여 해석 및 설계를 하고자 한다. 본 논문에서 설계대상으로 하는 내전형 BLDC 전동기는 기존에 사용중인 모델로서, 외부의 고정 전기자는 기존의 모델에 맞도록 외경을 그대로 유지하면서 Teeth 등을 설계변수로 하였고, 내부의 회전 자석계자는 기존에는 페라이트 자석을 사용하였으나 전동기의 성능 향상을 위해서 희토류 자석으로 대체하였다. 그리고 이로인한 고정자의 포화가 일어나지 않도록 최적 설계를 하였다. 유한요소법을 적용하여 자속분포, 코깅 토오크, 토오크 등을 해석하였고, 고정자와 슬롯의 최적화를 통하여 토오크 및 전동기의 성능을 향상시켰다.