• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.641-645
• /
• 2008

In this paper, vibration sources of the BLOC motor are identified and the motor vibrations are reduced by structural modification. For vibration characteristic identification, vibration signals measured by an accelerometer when the BLOC motor is moving. These signals are presented in a waterfall plot in order to find the dependency of frequency components on the motor speed. It is found that main vibration source is BLOC motor test rig. From finite element analyses and some experiments, it is also found that resonances occur because the natural frequencies of the test rig exist in usual driving speed rang. To shift the natural frequencies outside the driving rang, the test rig is modified increase stiffness. It is verified that considerable amount of vibration are reduced by the structural modification.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.22-25
• /
• 1999

A brushless DC motor has the high quality of torque output and silence, has been more widely used in industrial area. As the driver and controller of BLDC motor have been more complicated and precise, simulation method has been much used in motor design. And the output characteristics of BLDC motor is determined by the waveform of BACK-KMF in instinct. But because the conventional model of BLDC motor is obtained by approximation of real nonlinear waveform to ideal trapezoidal waveform, the error is occurred in simulation result. Thus in this paper, for the correction of this error in simulation, the model of real nonlinear waveform considered is proposed, and the simulation result is obtained in case of three-phase, four-poles Y-connected, surface mounted permanent magnet BLDC motor.

• Speech Sciences
• /
• v.7 no.1
• /
• pp.97-107
• /
• 2000

Motor aphasia is an affection frequently caused by insult of the left middle cerebral artery and usually accompanied by a large lesion involving the Broca's area and the adjacent motor and premotor areas. Therefore, a patient with motor aphasia commonly shows articulatory disturbances due to failure of the motor programing of speech sound. Objective assessment and treatment of phonologic programing is one of the important aspects of speech therapy in aphasic patients. We analyzed the speech disorders acompanied with motor aphasia in a 45-year-old man using a computerized sound spectrograph, Visi-$Pitch{\circledR}$, and Multi-Dimensional Voice $Program{\circledR}$. We concluded that a computerized speech analysis system is a useful tool to visualize and quantitatively analyse the severity and progression of dysarthria, and the effect of speech therapy.

• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.58-68
• /
• 1994

A miniature size electrostatic induction motor has been fabricated and studied parameters Influencing dominantly to the motor speed, such as a voltage and frequency of the 3 phase ac power source supplied to the stator of fabricated motor, the surface resistivity and relative dielectric constant of the rotor surface materials and the concurrently calculated relaxation time constants. It is found that the higher resitivity and/or the higher relative dielectric constant, concurrently the longer relaxation time constant of the rotor surface materials make the motor speed get higher speed. In case of discrete coated rotor surface it is found that the motor speed was increased logarithmically as narrow as width of the discrete coated Ti. And the degree of width of discrete coated Ti to the axial direction of the rotor was 60$^{\circ}$ and 150$^{\circ}$, the motor has got a 125% higher than that at the degree of 0$^{\circ}$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.40-49
• /
• 2001

The basic research on AKM(Apogee Kick Motor) for space launch vehicle was carried out. AKM which will be used as 3rd stage solid rocket motor in 3-stage Korean Sounding Rocket(III) has been developing. KM is a solid rocket motor using composite propellant based on HTPB and is composed of composite motor case and submerged nozzle. To develop KM rocket motor satisfing a given set of requirement, firstly the full-scale KM with diameter 520mm was designed, then sub-scale motors reduced about 60% were manufactured and tested. Full-scale ground firing test is accomplished two times.

• Journal of Korean Society for Quality Management
• /
• v.42 no.1
• /
• pp.91-109
• /
• 2014

Purpose: This study compares quality crisis and management at Hyundai Motor in the late 1990s and Toyota Motor in the late 2000s. We can expect to induce more meaningful policy implications in quality management from this in-depth comparative case study. Methods: This study compares two cases at Hyundai and Toyota Motor how to overcome quality crisis based on the OESP (Organization-Environments-Strategy- Performance) model. Results: Hyundai Motor shows centralized approach based on the asymmetric organizational culture and the entrepreneurial leadership but Toyota shows decentralized, systematic approach based on the steady state leadership and symmetric organizational culture. The CEO's leadership have proved to be one of the important factors at both companies. Conclusion: The effective quality management in global contexts has become more and more difficult for the 'complexity explosions' in automobile industry. As a consequence, the future competitive edge of world automobile industry will come from the effective quality management of products in global contexts.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.34-36
• /
• 2006

In this paper, we will treat the diagnosis problem to accurately determine fault types. The judgement of fault types is accomplished by observing the cluster newly formed with faults and clustering the input current waveforms to intrinsically show the conditions with the dignet that is a clustering algorithm. The types of input current waveforms are, however, constrained during normal operation, though it considers the load character. In case of faults. new clusters are generated outside the clusters. which appear during normal operation, because the input current waveforms of the induction motor are generated by the type which is not observed in case of faults. The diagnosis about the types of faults is essential to building a fault tree about the induction motor, and it removes the causes of the faults using a fuzzy logic. We, first, constitute a fault tree, which connects with the parts and the entire system of the induction motor, and investigate fault modes which can be generated from the fault tree and the relationship of the cause and the effect of each part (of the motor). Also, we distinguish the faults of each part by means of inducing the said of fuzzy relation equations encapsulating the relationship of the fault modes and each part.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.649-657
• /
• 1992

Transmission error for a stepping motor-timing belt drive system is investigated experimentally and analytically. From FFT analysis of the experimental results, it is found that the transmission error consists of three periodic errors : (1) error by the stepping motor per one resolution angle theta.$_{m}$, (2) error by the pulley eccentricity per one revolution theta.$_{e}$, and (3) error by the meshing effect between the belt and the pulley teeth per one pitch revoltion theta.$_{p}$. In order to investigate the effects of some design parameters on the transmission error, the dynamic models of the stepping motor-timing belt drive system are derived by Bondgraph. According to the simulation results, as the belt total tension increases, theta.$_{m}$ and theta.$_{e}$ decrease due to the nonlinearity of the belt. In adition, the numerical and experimental results show that theta.$_{m}$ and theta.$_{e}$ of the loaded case are larger than those of the unloaded case. The analytical results are in good accordance with the experimental results.sults.s.sults.

• Composites Research
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2003

Thus paper summarizes the procedures to develop the downscaled payload kick motor for KSR-III by KARI. Filament winding-a well-known method of manufacturing composite motor case - is adopted to reduce structural weight. Netting and lamination theories are used to determine adequate winding thickness under required internal pressure. Dome shapes are designed considering feasible winding patterns and easiness of mandrel manufacturing. T-800 carbon fiber and Novolac type resin are selected for weight-reduction. The separate mandrels are disassembled and removed after filament winding. The manufacturing process of real payload kick motor is developed from the design experience of downscaled ones.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.289-290
• /
• 1998

Purpose To investigate the difference of total activation in visual area, motor area, and cerebellum according to the stimulation paradigm. Materials and Methods Functional MR imaging was performed in 5 healthy volunteers with visual and motor activity using EPI technique. LED and Checker-Board stimulation were performed for visual activity. Thumb motion and Finger tapping were performed for motor and cerebellum activity. Time course data was obtained by calculating the total activation which was defined as the number of activated pixels x averaged pixel intensity. Results In the case of visual activity with LED stimulation, we found increased total activity of more than 100% compared with Checker-Board stimulation. In the case of motor area and cerebellum with Finger tapping stimulation, we found increased total activity of more than 100% and 150%, respectively compared with Thumb motion stimulation.