• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.218.1-218.1
• /
• 2005

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.214.2-214.2
• /
• 2008

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.442-446
• /
• 2004

This paper propose scene change detection algorithm using coefficient of forward prediction macro-block, backward prediction macro-block, and intra-coded macro-block on getting motion estimation. Proposed method detect scene change with correlation according picture type forward two picture or forward and backward two picture on video sequences. Proposed algorithm is high accuracy and can detect all scene change on video, and detect to occur scene change on P, B, I-picture.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.339-347
• /
• 2021

Piston type wave makers or flap type wave makers are usually adopted as a wave maker which disturbing the fluid domain with sinusoidal motion. Recently hybrid wave maker which could be operated as not only piston type and/or flap type but also swing type wave maker have been devised by utilizing the link mechanism. The wave board of hybrid wave maker has been devised to be independently controlled by the horizontal actuators on upper and lower end of the wave board. The wave board could operate as a flap type wave board when the lower hinge is in a stationary condition and the upper hinge is operated with sinusoidal motion. On the contrary, the swing type wave board could be obtained by the lower hinge is activated and the upper hinge is in a stationary condition. When both end of the wave board is activated in a synchronized condition, the wave board motion become piston motion. In addition the hybrid wave maker could enhance the piston motion with flap motion or swing motion by selecting control parameters. Various wave board motion of hybrid wave maker and relevant wave form have measured on the wave board and departed location. It is appeared that the novel hybrid wave maker could be utilized for the improvement of wave qualities in experiments.

• 한국통신학회논문지
• /
• 제30권6C호
• /
• pp.497-504
• /
• 2005

본 논문에서 재예측과 움직임벡터의 변경 최소화를 이용한 효율적인 비디오 워터마킹 기법을 제안한다. 일반적인 움직임벡터 기반의 워터마킹 기법들은 움직임벡터의 변경하여 워터마크를 삽입하기 때문에 움직임벡터를 변경에 따른 영상의 화질저화를 가져왔다. 따라서 제안한 방법은 움직임벡터의 변경을 최소화할 수 있는 삽입조건의 설정과 변경에 따른 오차를 최소화할 수 있는 재예측 기법에 의해 움직임벡터의 변경에 따른 화질열화를 최소화한다. 그리고 워터마크 정보를 고려한 임계값을 적응적으로 설정하여 워터마크의 정보량의 안정적 삽입을 보장할 수 있어 비디오 워터마킹을 효과적으로 수행할 수 있다. 제안한 방법은 비디오 비트스트림의 변화가 없기 때문에 기존의 동영상 압축표준과의 호환성을 유지할 수 있으며, 화질적인 측면에서 기존의 방법보다 약 $0.6{\sim}1.3\;dB$가 향상됨을 실험을 통해 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.213-214
• /
• 2012

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.107-112
• /
• 2011

The aim of this study is to analyze the hydrodynamic properties of a 2D floating body with moon pool using a 2D fully nonlinear Numerical Wave Tank(NWT). This NWT was developed based on the Boundary Element Method(BEM) with potential theory and fully nonlinear free surface boundary conditions. Free surface elevations in the moon pool were calculated in the time domain for various frequencies of forced body motions. The added-mass and damping coefficients of the heaving body were also obtained. The present numerical results were compared with the analytic and experimental results and their accuracy was verified.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.178-182
• /
• 2007

Precision stages are essential device for micro machines, fiber optic assembly systems, and biology instruments. In this paper, a precision inchworm type actuator for a linear stage is proposed and evaluated. An analytic method to design an inchworm type motor is proposed. Developed actuator provides fast motion compared with a commercial inchworm actuator, and can be used as an actuator for a stage in substitution for a conventional rotary actuator.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2008년도 한국컴퓨터종합학술대회논문집 Vol.35 No.1 (C)
• /
• pp.503-506
• /
• 2008

기존 논문에서 CCD 카메라를 이용해 3차원 데이터를 획득하는 시스템을 소개했었다. 하지만, 정확도에서는 기존에 개발한 다른 PSD카메라를 이용한 시스템과 큰 차이를 보이지 않았다. 본 논문에서는 정확도를 개선하기 위한 여러 가지 실험을 했으며, 결과를 통해 상당히 향상되었음을 알 수 있다. 제안된 방법은 왜곡제거, z축 보정 등이며, 각 방법의 비교실험을 통해 얼마나 개선되었는지 살펴본다.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.167-176
• /
• 2007

The purpose of this study was to offer suitable model for performing Tippelt motion and data for training Tippelt motion through the quantitative kinematical analysis of Tippelt motion in parallel bars. The results of analysing kinematic variations through three-dimensional reflection analysis of three members of the national team as the objects of the study were shown as follows. 1. It seemed that the shoulder-joints which are stretched as much as possible affects the whole Tippelt motion while one is swinging downward. The time of process of the center of mass for the body reaching to the maximum flection point should be quick and body's moving from the vertical phase to the front direction should be controled as much as possible. 2. While one is swinging upward, the stability of flying motion could be made certain by the control of body's rapid moving to the front direction and stretching shoulder-joints and hip-joint to reverse direction. 3. While one is flying upward, the body should be erected quickly and lessening the angle of the hip-joint affects the elevation of flight. When the powerful counter turn motion is performed, the stable motion could be made. As a result of this study, It seems that sudden fall and the maximum stretch of shoulder-joints is important during performing Tippelt motion in parallel bars. Also, it concludes that the maximum bending of hip-joints at the starting point of upward swing, sudden stretch to the reverse direction of shoulder-joints and hip-joints when one is leaving bars, control of body's moving to the front direction, and lessening the angle of hip-joints at the flying phase is important.