• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권2호
• /
• pp.75-86
• /
• 2010

In this work the possibility of obtaining a rectilinear motion of bodies partially or totally submerged without using propellers is evaluated. The system propulsion is based on a pair of counter rotating masses that generate the thrust. The fluid-body system has been schematized in order to carry out a very simple model. Using this model an evaluation of the body motion along a longitudinal direction was performed. The motion equations of the system were written and integrated. The external forces applied to the body depend on its velocity in relation to the water. These forces were obtained by fluid dynamic simulations. Regarding the mechanical configuration suggested, the results obtained show that a certain displacement of the body along a fixed direction is obtainable.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.236-241
• /
• 2001

Teach pendant is the most widely used means of robot teaching at present. Despite the difficulties of using the motion command buttons on the teach pendant, it is an economical, robust, and effective device for robot teaching task. This paper presents the development of a force/moment direction sensor named COSMO that can improve the teach pendant based robot teaching. Robot teaching experiment of a six axis commercial robot using the sensor is described where operator holds the sensor with a hand, and move the robot by pushing, pulling, and twisting the sensor in the direction of the desired motion. No prior knowledge of the coordinate system is required. The function of the COSMO sensor is to detect the presence f force and moment along the principal axes of the sensor coordinate system. The transducer used in the sensor is micro-switch, and this intuitive robot teaching can be implemented at a very low cost.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.164-170
• /
• 2017

One of the methods to consider the effect of respiratory motion of a tumor target in radiotherapy is to establish a treatment plan with the internal target volume (ITV) created based on an accurate analysis of the target motion displacement. When this method is applied to intensity modulated radiotherapy (IMRT), it is expected to yield a different treatment dose distribution under the motion condition according to the IMRT method. In this study, we prepared ITV-based IMRT plans with conventional IMRT using fixed gantry angle beams, RapidArc using volumetric modulated arc therapy, and tomotherapy using helical therapy. Then, the variation in dose distribution caused by the target motion was analyzed by the dose measurement in the actual motion condition. A delivery quality assurance plan was prepared for the established IMRT plan and the dose distribution in the actual motion condition was measured and analyzed using a two-dimensional diode detector placed on a moving phantom capable of simulating breathing movements. The dose measurement was performed considering only a uniform target shape and motion in the superior-inferior (SI) direction. In this condition, it was confirmed that the error of the dose distribution due to the target motion is minimum in tomotherapy. This is thought to be due to the characteristic of tomotherapy that treats the target sequentially by dividing it into several slices. When the target shape is uniform and the main target motion direction is SI, it is considered that tomotherapy for the ITV-based IMRT method has a characteristic which can reduce the dose difference compared with the plan dose under the target motion condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.271-276
• /
• 1993

Here in the present paper. A methodology for understanding scenes which includes moving objects in it, in the framework of notion of concepts. First by conceptualizing, understanding an object which is an element of a scene will be described. Then how to know the direction to which that object is heading will be discussed. Further, the methodology proposed, for understanding conceptually the motion of an object will be described utilizing the above knowledge of direction.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.999-1002
• /
• 2002

In this paper, we proposes an adaptive method for reducing the computational overhead of fine-to-coarse MRME at the finest resolution level by considering for the spatial and spectral characteristics between wavelet decomposition levels simultaneously. As we know, there is high correlation between the adjacent blocks and it can give the very important clue to estimate motion at finest level. So, in this paper, using the initial motion vector and the adjacent motion vector in the coarsest level, we determine the optimal direction that will be minimized the estimation error in the finest level. In that direction, we define the potential searching region within the full searching region that is caused to increase much computational overhead in the FtC method. Last, in that region, we process the efficient 2-step motion estimation. and estimate the motion vector at finest resolution level. And then, this determined motion vector is scaled to coarser resolutions. As simulation result, this method is similar to computational complexity of the CtF MRME method and very significantly reduces that of the FtC MRME method. In addition, they provide higher quality than CtF MRME, both visually and quantitatively

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.183-192
• /
• 2016

Generating motion of center of mass for biped robots is a challenging issue since biped robots can easily lose balance due to limited contact area between foot and ground. In this paper, we propose force control method to generate high-speed motion of the center of mass for horizontal direction without losing balancing condition. Contact consistent multi-body dynamics of the robot is used to calculate force for horizontal direction of the center of mass considering balance. The calculated force is applied for acceleration or deceleration of the center of mass to generate high speed motion. The linear inverted pendulum model is used to estimate motion of the center of mass and the estimated motion is used to select either maximum or minimum force to stop at goal position. The proposed method is verified by experiments using 12-DOF torque controlled human sized legged robot.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.185-204
• /
• 2015

This study investigates the impact of the earthquake incident angle on the structural demand and the influence of ground motion selection and scaling methods on seismic directionality effects. The structural demand produced by Non-Linear Time-History Analyses (NLTHA) varies with the seismic input incidence angle. The seismic directionality effects are evaluated by subjecting four three-dimensional reinforced concrete structures to different scaled and un-scaled records oriented along nine incidence angles, whose values range between 0 and 180 degrees, with an increment of 22.5 degrees. The results show that NLTHAs performed applying the ground motion records along the principal axes underestimate the structural demand prediction, especially when plan-irregular structures are analyzed. The ground motion records generate the highest demand when applied along the lowest strength structural direction and a high energy content of the records increases the structural demand corresponding to this direction. The seismic directionality impact on structural demand is particularly important for irregular buildings subjected to un-scaled accelerograms. However, the orientation effects are much lower if spectrum-compatible combinations of scaled records are used. In both cases, irregular structures should be analyzed first with pushover analyses in order to identify the weaker structural directions and then with NLTHAs for different incidence angles.

• 한국통신학회논문지
• /
• 제35권11C호
• /
• pp.940-947
• /
• 2010

DTV Full HD급이 보편화되면서 LCD(Liquid Crystal Display)의 잔상효과 제거와 격동적인 화면에서의 고화질 구현을 위해 수신 단에서 후처리 과정으로 움직임 보상 기반 프레임 보간(MCFI)이 사용되고 있다. MCFI는 움직임 정보를 이용하여 삽입될 화면을 보간하는데 이러한 움직임 정보를 후처리 없이 바로 사용하는 건 많은 열화 현상 및 보간 된 물체의 구조 변형 결과를 초래한다. 이에 본 논문에서는 움직임 벡터 후처리 가법으로서 에지 방향 정보기반 가변 가중치 벡터 중앙값 필터를 이용하여 움직임 벡터 처리 기법을 제안한다. 제안한 움직임 벡터 처리 가법은 먼저 소벨 마스크와 가중치 최대빈도필터를 통해 에지 정보맵을 생성한다. 그리고 $3{\times}3$ 윈도우 내 움직임 벡터들의 중앙값을 구한 후 그 중앙값과 윈도우 내 움직임 벡터들과의 변위 값을 이용하여 이상치(outlier) 움직임 벡터를 제거한다. 마지막으로 에지 정보맵의 에지방향 연속성과 움직임 벡터와의 공간적 상호 연관성을 고려하여 가중치 벡터 중앙값 필터를 적용한다. 실험 결과 PSNR은 "0.5 ~ 1" dB, 유사성 명가 지표인 SSIM은 "0.4 ~ 0.8" %의 성능 향상을 보였다.

• 한국멀티미디어학회논문지
• /
• 제21권9호
• /
• pp.1052-1061
• /
• 2018

In this paper, we propose a new algorithm that is robust against the effects of objects that are relatively unaffected by camera motion and can accurately detect camera motion even in high resolution images. First, for more accurate camera motion detection, a global motion filter based on entropy of a motion vector is used to distinguish the background and the object. A block matching algorithm is used to find exact motion vectors. In addition, a matched filter with the angle of the ideal motion vector of each block is used. Motion vectors including 4 kinds of diagonal direction, zoom in, and zoom out are added additionally. The experiment shows that the precision, recall, and accuracy of camera motion detection compared to the recent results is improved by 12.5%, 8.6% and 9.5%, respectively.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.433-441
• /
• 2016

Objective: The purpose of this study was to understand the injury mechanism and to provide quantitative data to use in prevention or posture correction training by conducting kinematic and kinetic analyses of risk factors of lower extremity joint injury depending on the change of direction at different angles after a landing motion. Method: This study included 11 men in their twenties (age: $24.6{\pm}1.7years$, height: $176.6{\pm}4.4cm$, weight: $71.3{\pm}8.0kg$) who were right-leg dominant. By using seven infrared cameras (Oqus 300, Qualisys, Sweden), one force platform (AMTI, USA), and an accelerometer (Noraxon, USA), single-leg drop landing was performed at a height of 30 cm. The joint range of motion (ROM) of the lower extremity, peak joint moment, peak joint power, peak vertical ground reaction force (GRF), and peak vertical acceleration were measured. For statistical analysis, one-way repeated-measures analysis of variance was conducted at a significance level of ${\alpha}$ <.05. Results: Ankle and knee joint ROM in the sagittal plane significantly differed, respectively (F = 3.145, p = .024; F = 14.183, p = .000), depending on the change of direction. However, no significant differences were observed in the ROM of ankle and knee joint in the transverse plane. Significant differences in peak joint moment were also observed but no statistically significant differences were found in negative joint power between the conditions. Peak vertical GRF was high in landing (LAD) and after landing, left $45^{\circ}$ cutting (LLC), with a significant difference (F = 9.363, p = .000). The peak vertical acceleration was relatively high in LAD and LLC compared with other conditions, but the difference was not significant. Conclusion: We conclude that moving in the left direction may expose athletes to greater injury risk in terms of joint kinetics than moving in the right direction. However, further investigation of joint injury mechanisms in sports would be required to confirm these findings.