• 한국해양학회지
• /
• v.30 no.3
• /
• pp.170-183
• /
• 1995

Eddies and surface current field in the southwestern part of the East Sea were investigated using satellite-tracked drifters, CTD, and ADCP from November 1992 to September 1993. Trajectories of surface drifters provided information for the first time on the meandering motion of the East Korean Warm Current in the Ullung Basin (referred as UB) and clearly indicated the existence of cyclonic and anticyclonic eddies of various scales. Anticyclonic eddies persisting for a relatively long period were observed in UB and the southwestern corner of the Northern (Japan) Basin (SNB), while a cyclonic eddy was found in the coastal area between Sokcho and Donghae during the summer. Analysis shows that the eddy in UB behaved as a stationary eddy at least during the observation period and the cyclonic eddy was closely related to the existence of a cold water mass. The anticyclonic eddy in SNB was larger than that in UB, but much elongated in shape. The eddy in UB is characteristic of major and minor axes of about 120 and 70 km, revolution period of 13.6 days, mean swirl velocity of about 24 cm/s, and mean eddy kinetic energy of 392 cm$\^$2//s$\^$2/. The eddy in SNB is described as follows; major and minor axes of 168 and 86 km, period of 14.9 days, mean swirl velocity of 29 cm/s and mean eddy kinetic energy of 629 cm$\^$2//s$\^$2/. The mean translational speed is about 3 cm/s for both eddies. The agreement of the surface current pattern in UB observed by ADCP with the geostrophic flow pattern may suggest that the eddy in UB was nearly in geostrophic balance. The eddy was found to be strongly bottom-controlled.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.323-333
• /
• 2015

Objective : The purpose of this study was to investigate the changes of gait patterns and muscle activations with increased loads during stair walking. Also, it can be used as descriptive data about continuous stair walking in a real life setting. Method : Twelve sedentary young male adults(Age: $27.0{\pm}1.8yrs$, Weight: $65.8{\pm}9.9kg$) without any lower extremity injuries participated in this study. Participants performed stair walking up 7 floors and their ascending and descending motion on each floor was analyzed. A wireless electromyography(EMG) were attached on the Rectus Femoris(RF), Biceps Femoris(BF), Gastrocnemius(GN), Tibialis Anterior(TA) muscle to calculate integrated EMG(iEMG), median frequency(MDF) and co-contraction index(CI). Chest and left heel accelerometer signal were recorded by wireless accelerometer and those were used to calculate approximate entropy(ApEn) for analyzing gait pattern. All analyses were performed with SPSS 21.0 and for repeated measured ANOVA and Post-hoc was LSD. Results : During ascending stairs, there were a statistically significant difference in Walking time between 1-2nd and other floors(p=.000), GN iEMG between 2-3th and 6-7th(p=.043) floor, TA MDF between 1-2nd and 5-6th(p=.030), 6-7th(p=.015) floor and TA/GN CI between 2-3th and 6-7th(p=.038) floor and ApEn between 1-2nd and 6-7th(x: p=.003, y: p=.005, z: p=.006) floor. During descending stairs, there were a statistically significant difference in TA iEMG between the 6-5th and 3-2nd(p=.026) floor, and for the ApEn between the 1-2nd and 6-7th(x: p=.037, y: p=.000, z: p=.000) floor. Conclusion : Subjects showed more regular pattern and muscle activation response caused by regularity during ascending stairs. Regularity during the first part of stair-descending could be a sign of adaptation; however, complexity during the second part could be a strategy to decrease the impact.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.31-38
• /
• 2011

This study aimed to determine the effects of the blockage of visual feedback on joint dynamics of the lower extremity. Fifteen healthy male subjects(age: $24.1{\pm}2.3\;yr$, height: $178.7{\pm}5.2\;cm$, weight: $73.6{\pm}6.6\;kg$) participated in this study. Each subject performed single-legged landing from a 45 cm-platform with the eyes open or closed. During the landing performance, three-dimensional kinematics of the lower extremity and ground reaction force(GRF) were recorded using a 8 infrared camera motion analysis system (Vicon MX-F20, Oxford Metric Ltd, Oxford, UK) with a force platform(ORG-6, AMTI, Watertown, MA). The results showed that at 50 ms prior to foot contact and at the time of foot contact, ankle plantar-flexion angle was smaller(p<.05) but the knee joint valgus and the hip flexion angles were greater with the eyes closed as compared to with the eyes open(p<.05). An increase in anterior GRF was observed during single-legged landing with the eyes closed as compared to with the eyes open(p<.05). Time to peak GRF in the medial, vertical and posterior directions occurred significantly earlier when the eyes were closed as compared to when the eyes were open(p<.05). Landing with the eyes closed resulted in a higher peak vertical loading rate(p<.05). In addition, the shock-absorbing power decreased at the ankle joint(p<.05) but increased at the hip joints when landing with the eyes closed(p<.05). When the eyes were closed, landing could be characterized by a less plantarflexed ankle joint and more flexed hip joint, with a faster time to peak GRF. These results imply that subjects are able to adapt the control of landing to different feedback conditions. Therefore, we suggest that training programs be introduced to reduce these injury risk factors.

• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.142-148
• /
• 1998

Video-assisted thoracic surgery(VATS) is emerging as a viable alternative to thoracotomy when surgical treatment of spontaneous pneumothorax is required. 20 patients with spontaneous pneumothorax underwent bullectomy between July 1995 and May 1996. The patients were divided into two groups : Control group ; the patients who received with mid-axillary approach(n=10), Experimental group ; the patients who received with VATS (n=10). The results were as follows ; 1. The total sex distribution was male predominance (male:female=17:3). Mean age of control group was 29.6$\pm$9.8 years and experimental group was 27.2$\pm$11.9 years. 2. The mean period of postoperative chest tube indwelling duration and hospital stay were 3.3$\pm$0.8 days and 7.9$\pm$1.2 days in control group and 2.1$\pm$0.9 days and 5.2$\pm$3.1 days in experimental group(p=0.005 and p=0.02). 3. The mean time of operation, vital signs and arterial blood gas analysis did not showed any statistical differences between the groups. 4. Percent recovery of tidal volume and forced vital capacity were significantly improved in experimental group comparing with control group (p<0.05). 5. The patients undergoing VATS experienced significantly less postoperative pain and limitation of motion. In conclusion, VATS is safe and offers the potential benefits of shorter postoperative hospital stays and less pain with cosmetic benefits.

• Journal of the Korean earth science society
• /
• v.36 no.7
• /
• pp.632-642
• /
• 2015

Seismograms are composed of 3 characteristics, that is, seismic source, attenuation, and site amplification. Among them, site amplification characteristics should be considered significantly to estimate seismic source and attenuation characteristics with more confidence. This purpose of this study is to estimate the site amplification characteristics at each site using horizontal to vertical (H/V) spectral ratio method. This method, originally proposed by Nakamura (1989), has been applied to study the surface waves in microtremor records. It has been recently extended to the shear wave energy of strong motion and applied to the study of site amplification. This study analyzed the H/V spectral ratio of 6 ground motions respectively using observed data from 4 sites nearby in Yedang Reservoir. And then, site amplification effects at each site, from 3 kinds of seismic energies, that is, S waves, Coda waves energy, and background noise were compared each other. The results suggested that 4 sites showed its own characteristics of site amplification property in specific resonance frequency ranges (YDS: ~11 Hz, YDU: ~4 Hz, YDD: ~7 Hz). Comparison of this study to other studies using different analysis method can give us much more information about dynamic amplification of domestic sites characteristics and site classification.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.111-126
• /
• 2009

The purpose of this study was to derive the criterions of each type of mental models on the plate boundaries and to investigate high school students' mental models on these concepts. The 11th grade student participants were requested to draw the collisional, convergent, and divergent boundaries and were interviewed individually. The drawings and the data gathered through the interviews were analyzed qualitatively. The mental models on the plate boundaries were classified as 'naive model', 'unstable model', 'causal model', and 'conceptual model'. The criterions for analyzing the mental models were the differentiations of the lithospheric plates and the mantle, the explanations of the motion of the plates and lower mantle, the demonstrations of topographical features of the plate boundaries and the causal relationships between the mantle convection and the topographical features. The findings revealed that the students holding 'the naive model' and 'the unstable model' were unable to relate the mantle convection and the three boundaries. In contrast, the students holding 'the causal model' and 'the conceptual model' were able to explain that the mantle convection causes the three boundaries. Also, the types of epistemological belief were different depending on their mental models. Students holding the naive model and the unstable model tended to rely upon the external authorities.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.2
• /
• pp.225-231
• /
• 2017

Objective : Solid bone fusion is an essential process in spinal stabilization surgery. Recently, as several minimally invasive spinal surgeries have developed, a need of artificial bone substitutes such as demineralized bone matrix (DBM), has arisen. We investigated the in vivo bone growth rate of DBM as a bone void filler compared to a local autologous bone grafts. Methods : From April 2014 to August 2015, 20 patients with a one or two-level spinal stenosis were included. A posterior lumbar interbody fusion using two cages and pedicle screw fixation was performed for every patient, and each cage was packed with autologous local bone and DBM. Clinical outcomes were assessed using the Numeric Rating Scale (NRS) of leg pain and back pain and the Korean Oswestry Disability Index (K-ODI). Clinical outcome parameters and range of motion (ROM) of the operated level were collected preoperatively and at 3 months, 6 months, and 1 year postoperatively. Computed tomography was performed 1 year after fusion surgery and bone growth of the autologous bone grafts and DBM were analyzed by ImageJ software. Results : Eighteen patients completed 1 year of follow-up, including 10 men and 8 women, and the mean age was 56.4 (32-71). The operated level ranged from L3/4 to L5/S1. Eleven patients had single level and 7 patients had two-level repairs. The mean back pain NRS improved from 4.61 to 2.78 (p=0.003) and the leg pain NRS improved from 6.89 to 2.39 (p<0.001). The mean K-ODI score also improved from 27.33 to 13.83 (p<0.001). The ROM decreased below 2.0 degrees at the 3-month assessment, and remained less than 2 degrees through the 1 year postoperative assessment. Every local autologous bone graft and DBM packed cage showed bone bridge formation. On the quantitative analysis of bone growth, the autologous bone grafts showed significantly higher bone growth compared to DBM on both coronal and sagittal images (p<0.001 and p=0.028, respectively). Osteoporotic patients showed less bone growth on sagittal images. Conclusion : Though DBM alone can induce favorable bone bridging in lumbar interbody fusion, it is still inferior to autologous bone grafts. Therefore, DBM is recommended as a bone graft extender rather than bone void filler, particularly in patients with osteoporosis.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.125-135
• /
• 1993

The purposes of this research are firstly to define the characteristics of movement on the costume, secondly to demonstrate that fine art, expecially in relation to kinetic art, has become a good motif in modern costume de-sign, and thirdly to examin the characteristics of movement as shown in modern costume de-sign. For this study, we selected and analyzed some costume designs among those introduced in fashion magazines, which are Collections, Fashion-Preview, Fashion Show, Collezioni, and L'Officiel that have been issued since 1988. As this research is carried out only through the analysis of pictures, it is not ac-companied by a study on material itself. The result of this study is that the ex-pression of movement on modern fashion can be shown in two ways, one is the inclusive and subordinate movement expressed on the cloth-ing according to the motion of body when they are worn, and the other is the movement caused by the very designs of clothing. And the latter can be also divided in two ways, the illusionistic movement and the actual move-ment. The expression of actual movement is made through the emphasis of direction, rhythm, and dimension of the costume. And the illusionistic movement is expressed by the de-sign to which the textile pattern or reflection of light is applied so that the movement is larger than the actual movement. A sense of direction expressed on the cos-tume by the actual movement creates a light rhythm and adds interest to the costume. This reflects a part of psychology of modern men who are not accustomed to the statics. In the rapidly changing society of information our modern men seek after movement even in the statics. It is also true in the clothing and they seem to get a psychological rest through the immediated visual change as shown in fashion design. The simple and cheerful rhythm expressed by the illusionistic movement on the costume is attempted in order to overcome the static tediousness caused by simple design. These elements of movement cause the en-largement of visible range and create another enlarged shape other than the real one, so that they come to remove the dullness and monot-ony in costume design and provoke interest in costume, as if kinetic art reveals the various aspects that transcend the closed area of fine art upon the motif of 'movement'. finally, as this paper deals with the ex-pression of movement as shown in the costume design which prevailed after 1988, it is desir-able hereafter to study more about the fashion since 1950 when kinetic art began in earnest, along with the comparative study on the ex-pression of movement in our Korean designer's and foreign designer's works.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.456-466
• /
• 2017

This work investigated the particle morphology change to difference in milling media in a metal based composite fabrication process using a stirred ball mill with ball behavior of DEM simulation. A simulation of the three dimensional motion of grinding media in the stirred ball mill for the research of grinding mechanism to clarify the force, kinetic energy, and medium velocity of grinding media were calculated. In addition, the rotational speed of the stirred ball mill was changed to the experimental conditions for the composite fabrication, and change of the input energy was also calculated while changing the ball material, the flow velocity, and the friction coefficient under the same conditions. As the rotating speed of the stirred ball mill increased, the impact energy between the grinding media to media, media to wall, and media and the stirrer increased quantitatively. Also, we could clearly analyze the change of the particle morphology under the same experimental conditions, and it was found that the ball behavior greatly influences in the particle morphology changes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.120-128
• /
• 2016

This paper describes power generation from sea waves by using linear permanent magnet generator. A buoy is placed on the ocean surface and connected to the generator. The wave energy is carried out from the movement of a buoy. An electrical conversion system is needed between the generator and the grid. For an analysis of the power system, the modeling of the linear generator and converter system was proceeded. This paper proposes vector control method for wave power generation system using linear generator. In order to verify the proposed method, simulation and experiment performed and the results support the validity of the control scheme.