• Mycobiology
• /
• v.32 no.4
• /
• pp.173-178
• /
• 2004

Fifteen Rhizobium spp. from nodules of 6 common pulses collected from 6 districts of Assam were studied for their infectivity, intrinsic antibiotic resistance, nitrogenase activity and effect of dual inoculation with two native Arbuscular Mycorrhizal Fungi viz. Glomus mosseae(GM) and Gigaspora gilmarie(GG). Out of the 15 isolates 9 were found nodulation positive and 6 of them(AR1, BR8, BR12, AR10, UR10 & GR21) were subjected to intrinsic antibiotic sensitivity test of which AR1 showed resistance against all the 9 test antibiotics. Isolates AR1 and GR21 showed the highest(4.25 mole, $gm^{-1}hour^{-1}$) and the lowest(1.05 mole, $gm^{-1}hour^{-1}$) nitrogenase activity respectively. In Most Probable Number count, the maximum Rhizobium population $5.8{\times}10^5$, was found in both Blackgram and Greengram variety of pulses. The maximum dry weight of nodules(3.14 g), dry weight of shoot(10.08 g), nitrogen content(7.68 mg, $plant^{-1}$), chlorophyll content(1.89 mg, $g^{-1}$), phosphorus content of shoot(6.17 mg, $g^{-1}$) and yield(535.67 kg, $Ha^{-1}$) were found when AR1 dually inoculated with GM in Blackgram.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.245-249
• /
• 2010

Much interest on the thermoplastic elastomers (TPEs) has recently been attracted in commercial fields as well as scientific and applied research. The TPEs have their own characteristic area especially in relation with block copolymers as well as many other polymeric materials, since they show interesting features displayed by the conventional vulcanized rubber, and at the same time, by the thermoplastics. In addition, they are characterized by a set of interesting properties inherent to block and graft copolymers, variety of blends and vulcanized materials. The importance of TPE as organic materials can be evaluated by the number of published reports (papers, patents, technical reports, etc). For the suitable introduction of the TPE, historic, scientific, technical and commercial considerations should be taken into account. This review article starts with a brief discussion on historical considerations, followed by a introduction of the main preparations and analytical techniques utilized in chemical, structural, and morphological studies. The properties, processing tools, the position among organic materials, and applications of TPEs are also briefly reviewed. Finally, the most probable trends of their future development are discussed in a short final remarks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.844-849
• /
• 2022

The pathogenic Vibrio genus denotes halophilic bacteria that are distributed in aquatic environments, including both sea and freshwater. V. cholerae, V. vulnificus, and V. parahaemolyticus are the main species that can be potent human pathogens and the leading cause of septicemia, wound infections, and seafood borne gastroenteritis. The aim of this study was to investigate the presence of pathogenic Vibrios in seawater. We obtained a total of 80 seawater samples from the Geum River estuary area in the west coast of Korea from April to December 2021. Pathogenic Vibrios was determined using a combination of the most probable number-polymerase chain reaction (MPN-PCR) methods. The detection levels of V. cholerae, V. parahaemolyticus, and V. vulnificus in the seawater samples were 7.5%, 68.8%, and 30.0%, respectively. The quantitative results were as follows: 3.6-3.6 MPN/100 mL in V. cholerae, 3.6-3,400 MPN/100 mL in V. parahaemolyticus, and 3.6-4,300 MPN/100 mL in V. vulnificus. Overall, these results provide novel insight into the necessity for seawater sanitation in the Geum River estuary area, and could help reduce the risk of seafood-borne outbreaks caused by pathogenic Vibrios.

• Geomechanics and Engineering
• /
• v.32 no.2
• /
• pp.209-232
• /
• 2023

A comprehensive study was conducted to design economical foundations for a number of buildings on soft cohesive soil in the southern coastal regions of Iran. Both static and seismic loads were considered in the design process. Cyclic experiments indicated that the cohesive soil of the area has potential for softening. Consequently, the major challenge in the design stages was relatively high dimensions of settlement, under both static and seismic loadings. Routine soil-improvement methods were too costly for the vast area of the project. After detailed numerical modeling of different scenarios, we concluded that, in following a performance-based design approach and applying a special time schedule of construction, most of the settlement would dissipate during the construction of the buildings. Making the foundation as rigid as possible was another way to prevent any probable differential settlement. Stiff subgrade of stone and lime mortar under the grid foundation and a reinforced concrete slab on the foundation were considered as appropriate to this effect. In favor of an economical design, in case the design earthquake strikes the site, the estimations indicate no collapse of the buildings even if considerable uniform settlements may occur. This is a considerable alternative design to costly soil-improvement methods.

• Journal of the Korean Society of Systems Engineering
• /
• v.12 no.1
• /
• pp.59-71
• /
• 2016

The Nuclear and Fossil Steam Turbines record a considerable number of failures annually. Some of these failures reported are as result of blade failure. The failure of the L-0 blade in a Steam Turbine is one of the most reported blade failure in Nuclear and Fossil steam turbines. This paper seeks to identify the best Non Destructive Evaluation (NDE) method or methods to be used in the steam turbine L-0 blades inspection process. The development of systems engineering processes presents an opportunity to apply NDE inspection to the L-0 blades. This process apply computer modelling of the L-0 using ANSYS and by simulating the stresses experienced by the L-0 blade during operation it is possible to identify the most susceptible areas for crack formation and growth. The results from these models compared to industry data for validation. The analysis of these results used to predict the most probable failure location and failure modes. Therefore NDE inspection can be applied to these areas with greater degree of accuracy. This would be beneficial in the increasing the accuracy in the detection of cracks and hence save inspection time and the overall inspection cost. Furthermore, not only the location for crack formation and NDE inspection determined but also best the NDE inspection technique/techniques to be applied appropriately on the L-0 blade are prescribed.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.248-256
• /
• 2007

In this study, the competitive polymerase chain reaction (cPCR) was used to develop a direct enumeration method of Salmonella spp. in pork meat. After comparing three DNA extraction methods, the modified guanidine thiocyanate-phenol-chloroform method was chosen for Salmonella DNA extraction in artificially inoculated pork meat. The previously reported 284-bp invA gene (Rahn et al. Mol. Cell. Probes 1992) was tested for specificity, and 57 Salmonella strains and 24 non-Salmonella strains were evaluated. All Salmonella strains tested were invA positive, and all non-Salmonella strains produced no false positive amplification products. The detection limit achieved was as low as 1,460 colony-forming units (cfu) per 0.1g of pork meat. For cPCR, the invA gene, which features a 82 bp-deletion, was cloned in the pGEM-4Z vector. A known amount of competitor DNA, which has the same primer binding sites, was co-amplified with Salmonella chromosomal DNA from the artificially inoculated pork meat. The cell-number determined by cPCR was approximately equal to the cfu from the most probable number (MPN) method. Finally, the whole procedure took only 5 hr.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.176-182
• /
• 2019

Objective: This study was conducted to investigate basic information on genetic structure and characteristics of Limousin population in Hungary. Obtained results will be taken into consideration when adopting the new breeding strategy by the Association of Hungarian Limousin and Blonde d'Aquitaine Breeders (AHLBB). Methods: Genetic diversity and phylogenetic relationship of 3,443 Limousin cattle from 16 different herds were investigated by performing genotyping using 18 microsatellite markers. Amplified DNA was genotyped using an automated genetic analyzer. Results: Mean of effective alleles ($n_e$) of the populations was 3.77. Population C had the lowest number of effective alleles (3.01) and the lowest inbreeding coefficient ($F_{IS}$) value (-0.15). Principal component analysis of estimated genetic distance ($F_{ST}$) values (p<0.000) revealed two herds (C and E) distinct from the majority of other Limousin herds. The pairwise $F_{ST}$ values of population C compared to the others (0.066 to 0.120) fell into the range of moderate genetic distance: 0.050 to 0.150, while population E displayed also moderate genetic distance ($F_{ST}$ values in range 0.052 to 0.064) but only to six populations (G, H, J, L, N, and P). $F_{ST(C-E)}$ was 0.148, all other pairs -excluding C and E herds- displayed low genetic distance ($F_{ST}$<0.049). Population D, F, I, J, K, L, N, O, and P carried private alleles, which alleles belonged to 1.1% of the individuals. Most probable number of clusters (K) were 2 and 7 determined by Structure and BAPS software. Conclusion: This study showed useful genetic diversity and phylogenetic relationship data that can be utilized for the development of a new breeding strategy by AHLBB. The results presented could also contribute to the proper selection of animals for further whole genome scan studies of Limousins.

• Journal of fish pathology
• /
• v.6 no.2
• /
• pp.205-218
• /
• 1993

On the development of hirame(Paratichtys olivaceus) culture, outbreak of scuticociliata infection was reported to cause severe damage in Japan. To establish effective measures for isolation and cultivation of this ciliate, we tried to culture this pathogenic ciliate using medium for bacteria and fish cell lines in vitro. Scuticociliata from the brain tissues of infected fish was aseptically inoculated to CHSE-214 cells cultured in MEM-10 without antibiotic. Scuticociliata grew well and the number of ciliate reached $10^6\;cells/ml$ at temperatures of $15^{\circ}C$ to $20^{\circ}C$ for 10d. The number of ciliate cultured in the cell lines is 10 times higher than the numbers cultured in the liquid medium alone. This ciliata could be cloned by dilution method. Scuticociliata isolated could grow well on 42 different cell lines that were established from marine fish, warm freshwater fish, and salmonids. This ciliate could be preserved in liquid nitrogen for more than 6 months. Subsequently, we observed the optimal temperature and salinity for growth, and tested the sensitivities of this organism to formaldehyde, flagyl(Metronidazole), Ekuteshin(Combination compound of sulfamonometoxin and ormethoprim), and ozonixation. Optimal temperature for growth was $25^{\circ}C$ and salinity was 1.0 to 1.5%. Washed scuticociliata was killed by formaldehyde at the concentration of 50ppm for 10min, but was not completely killed even at a high concentration of 400ppm for 20min in MEM-5. Flagyl and Ekuteshin can inhibit the growth of scuticociliata at the concentration of 1,000 and $100{\mu}g/ml$ in MEM-10, respectively. More than 99% of this scuticociliata could be killed by ozonization at a dose equivalent to $1.0mg/\ell$ oxidant for 30sec in sea water. Isolated scuticociliata showed the pathogenicity to the cultured hirame by artificial infection(I. P. injection, $10^5\;cells$/fish). The number of scuticociliata in the water could be counted by most probable number(MPN) method using tissue culture, and the minimum detectable number was $1.8\;cells/\ell$. The number in the reservoir tank for water supply to the culture tank was 110 cells/l. After cleaning by elimination of the sediments from of the reservoir tank and disinfected with formaldehyde, number of scuticociliata decreased and was counted less than $1.8\;cells/\ell$ and infection rate of cultured hirame was decreased.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.291-299
• /
• 2001

Recently, severe wear on the shutdown rod cladding of Ulchin Nuclear Power Plant #1, #2 were observed by the Eddy Current Test(E.C.T.). In particular, the wear at the sixth card location was up to 75%. The test results indicated that the Flow Induced Vibration(F.I.V.) might be the cause of the fretting wear resulting from the contact between Rod Cluster Control Assemblies(RCCAs) and their spacing cards(guide plates) arranged in the guide tube. From reviewing RCCAs fretting wear repots and analyzing the general characteristics of F.I.V. mechanism in the reactor, geometric layout and flow conditions around the control rod, it is concluded that the turbulence excitation is the most probable vibration mechanism of RCCA. To identify the governing mechanism of RCCA vibration, an experiment was performed for a representative rod position in which the most serious fretting wear experienced among the six rod positions. The experimental rig was designed and set up to satisfy the governing nondimensional numbers which are Reynolds number and mass damping parameter. The vibration amplitude measurement by the non-contact laser displacement sensor showed good agreements in the frequency and the maximum wearing(vibration) location with Ulchin E.C.T. results and Framatome report, respectively. The sudden increase in the vibration amplitude was sensed around the 6th guide plate with mass flow rate variation. Comparing the similitude rod behaviour with the idealized response of a cylinder in flow induced vibration, it was found that he dominant mechanism of vibration was transferred from turbulence excitation to periodic shedding at the mass flow ate 90ι/min. Also the critical velocity of the vibration in RCCAs was determined and the vibration can be prevented by reducing the bypass flow rate below the critical velocity.

• Fisheries and Aquatic Sciences
• /
• v.22 no.11
• /
• pp.26.1-26.7
• /
• 2019

Background: The monitoring of pathogens of fishery auction markets is important to obtain safe fishery products regarding hygiene and sanitation. In this study, aerobic, coliform, Escherichia coli, and Vibrio cholerae were monitored in the fishery products and environmental samples obtained from fishery auction markets. Methods: The fishery products (flounder, octopus, skate, rock cod, sea bass, snail, monkfish, flatfish, comb pen shell, corb shell, conger eel, hairtail, croaker, and pilchard) were placed in filter bags, and the environmental samples (samples from the water tanks at the fishery auction markets, seawater from the fishery distribution vehicles, ice from wooden or plastic boxes, and surface samples from wooden and plastic boxes used for fish storage) were collected. Aerobic bacteria, E. coli, and coliform in the samples were enumerated on aerobic count plates and E. coli/coliform count plates, respectively. For V. cholerae O1 and V. cholerae non-O1 quantification, most probable number (MPN)-PCR analysis was performed. Results: Aerobic and coliform bacteria were detected in most samples, but E. coli was not detected. Wooden boxes were contaminated with high levels of aerobic and coliform bacteria in all seasons (spring, summer, and fall). During fall, V. cholerae non-O1 were detected in snails, hairtails, croakers, flatfishes, pilchards, plastic boxes, and water samples. Conclusions: These results indicate an increased prevalence of V. cholerae contamination in fishery products in fall, including food contact samples, which can be vehicles for cross-contamination.