• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.49-52
• /
• 2009

Practical building integrated photovoltaic system built by Kolon E&C has been monitored and evaluated with respect to power generation, which was installed in Deokpyeong Eco Service Area in Deokpyeong, Gyeonggi, Korea. The amorphous silicon transparent PV module in this BIPV system has 44Wp in power output per unit module and 10% of transmittance with the unit dimension with $980mm{\times}950mm$. The BIPV system was applied as the skylight in the main entrance of the building. This study provided the database for the practical application of the transparent thin-film PV module for BIPV system through 11 month monitoring as well as various statistical analyses such as monthly power output and insolation. Average monthly power output of the system was 52.9kWh/kWp/month which is a 60% of power output of the previously reported data obtained under $30^{\circ}$of an inclined PV module facing south(azimuth=0). This lower power output can be explained by the installation condition of the building facing east, west and south, which was resulted from the influence of azimuth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.670-675
• /
• 1994

Yhis paper describes a fault diagnosis simulation of the Real-Time Multiple Fault Dignosis System (RTMFDS) for forcasting faults in a system and deciding current machine state from signal information. Comparing with other diagnosis system for single fault,the system developed deals with multiple fault diagnosis,comprising two main parts. One is a remotesignal generating and transimission terminal and the other is a host system for fault diagnosis. Signal generator generate the random fault signal and the image information, and send this information to host. Host consists of various modules and agents such as Signal Processing Module(SPM) for sinal preprocessing, Performence Monotoring Module(PMM) for subsystem performance monitoring, Trigger Module(TM) for multi-triggering subsystem fault diagnosis, Subsystem Fault Diagnosis Agent(SFDA) for receiving trigger signal, formulating subsystem fault D\ulcornerB and initiating diagnosis, Fault Diagnosis Module(FDM) for simulating component fault with Hierarchical Artificial Neural Network (HANN), numerical models and Hofield network,Result Agent(RA) for receiving simulation result and sending to Treatment solver and Graphic Agent(GA). Each agent represents a separate process in UNIX operating system, information exchange and cooperation between agents was doen by IPC(Inter Process Communication : message queue, semaphore, signal, pipe). Numerical models are used to deseribe structure, function and behavior of total system, subsystems and their components. Hierarchical data structure for diagnosing the fault system is implemented by HANN. Signal generation and transmittion was performed on PC. As a host, SUN workstation with X-Windows(Motif)is used for graphic representation.

• 센서학회지
• /
• 제15권2호
• /
• pp.77-83
• /
• 2006

A monitoring apparatus for pulse shapes of human heartbeats has been developed using an amorphous MI(Magnetic Impedance) sensor. The pulse shapes are successfully obtained from voltage signals due to the variations of magnetic impedance in the amorphous MI sensor, which is attached to a patient's wrist. This voltage signal was fed into a signal processing module to extract the pulse shapes of heartbeats. The signal processing module, which is proposed to detect a weak variations of impedance in MI sensor under a noisy measurement environment, consists of a high frequency current source, an amplifier stage and a synchronous detection circuit. To evaluate the characteristics of a newly developed apparatus, various experiments were performed. The experimental results show that the developed apparatus could be used as a diagnosis tool for traditional Korean medicine with further systematic clinical studies.

• 한국전자통신학회논문지
• /
• 제9권4호
• /
• pp.469-474
• /
• 2014

전신주에 설치된 난립 통신선로의 포설 상태를 모니터링하고, 정비용 부가정보 수단을 제공할 수 있는 현장 모니터링 지원 시스템을 개발한다. 공중선로 정비 지원을 위한 모니터링 모듈 및 정보 처리 어플리케이션을 적용 임베디드 시스템을 제작한다. 본 연구에서는 정부의 공중선 정비 종합계획에 따라 작업 안전사고 예방 지원 장치로 보급하기 위한 대도시 공중선 정비 사업에 즉시 활용하고, 고소 공사 편의 및 작업자의 정비 효율성을 제고하는데 목적을 둔다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.177-179
• /
• 2000

In this paper, we developed the online Monitoring & Diagnostic(MD) system of distribution transformers. It consists of the Data Acquisition(DA) module and the DataBase(DB) module. The acquired data from the distribution transformers is stored to the DB in an on-line. The DB is planned and made to the RDBMS (Relative DataBase Management System) to manage the data efficiently. The developed MD system estimates the loss of life from the DB. Thus, it could be managed the career and the functional lifetime of the transformer more efficiently than existing systems. In the case study, the oil temperature rising experiment is performed by using the back loading method in the laboratory level. From the results, the proposed MB system can be a practical applications for the distribution transformers.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.498-503
• /
• 2010

최근, 전력공급의 안정성과 신뢰성 그리고 고품질화를 위해 인터넷을 기반으로 하는 산업용 디지털 분전반이 새롭게 요구되고 있다. 따라서 본 논문에서는 3상 4선식 전력공급방식을 기반으로 하는 산업용 3상 분전반이 설계된다. 그리고 3상 산업용 분전반을 위한 전력관리 모듈이 시험 제작되며, 끝으로, 3상 전구 부하 시험을 통해 시작품의 3상 전압, 전류 측정 기능이 검증된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.42-47
• /
• 2001

Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. In this paper, we would like to introduce the signal processing for ECG analysis and the device made for wireless communication of ECG data. In the signal processing, the wavelet transform decomposes the ECG signal into high and low frequency components using wavelet function. Recomposing the high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the polynomial approximation partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with the database, we can detect and classify the heart disease. The ECG detection device consists of amplifier, filters, A/D converter and RF module. After amplification and filtering, the ECG signal is fed through the A/D converter to be digitalized. The digital ECG data is transmitted to the personal computer through the RF transceiver module and serial port.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제49차 동계학술대회논문집 22권1호
• /
• pp.139-142
• /
• 2014

앉아서 생활하는 시간이 많은 현대인들에게 올바르게 앉는 자세는 매우 중요하다. 따라서 현대인들이 올바른 자세를 유지할 수 있도록 도와주는 자세 모니터링 시스템을 고안하게 되었다. 이 시스템의 주요 구성으로는 전원부와 계측부, 제어부, 통신부, 안드로이드기반 어플리케이션으로 나눌 수 있다. 전원부는 9V의 건전지 하나로 구성되어 있고, 2개의 레귤레이터를 통해 아날로그 회로(3.3V)와 MCU(5V)에 전원이 공급되어진다. 그리고 계측부는 6개의 압력센서를 이용하여 아날로그 값을 계측한다. 제어부와 통신부는 MCU 보드(MSP430 Launchpad)와 FB155BC Bluetooth Module로 구성되어 있고, 안드로이드기반 어플리케이션은 Bluetooth Module에서 받은 디지털 신호들을 스마트폰의 화면에 UI공정을 거쳐 디스플레이 한다. 본 연구는 잘못된 자세로 의자에 앉는 습관을 스마트폰의 화면을 통해 실시간으로 확인하고, 바른 자세로 앉을 수 있도록 하여 척추교정 및 척추질환 예방에 기여할 것으로 예상된다.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.211-220
• /
• 2014

본 논문에서는 하나의 FPGA 내에 DC 모터 제어와 TFT LCD 인터페이스가 내장되어, 제어와 결과 데이터의 실시간 분석이 용이하고 컴팩트한 전(full)-FPGA 기반 모터 제어 시스템을 보인다. PID 속도 제어 모듈과 TFT LCD 상에 실험 결과를 실시간 보여주기 위한 모니터링 모듈을 하나의 FPGA내에 설계하고, 시뮬레이션과 실험을 통하여 유용성을 보인다. FPGA로는 xc3s400를 사용하였고, AD (Aaltium Designer)를 이용하여 전체 시스템을 설계하였다. DC 모터 4상한 운전을 위해 MOSFET를 이용한 PWM 모터 드라이버를 제작하였다.