• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.07a
• /
• pp.101-102
• /
• 2015

본 논문에서는 다수의 생체계측 정보를 MDEC(Medical Device Exchange Communication) 기반의 공통모듈을 이용하여 중앙 집중 관리를 위한 CMS(Central Monitoring System)를 제안한다. 기존의 바이탈사인 모니터 등은 환자별로 부착되어 다수의 환자에 대한 이상 징후를 실시간으로 모니터링하기에는 어려움이 있다. 이에 본 논문에서는 다수의 계측 장비를 통합하는 공통모듈인 MDEC을 이용하여 집중 모니터링이 가능한 CMS을 구현하였다. 계측장비와 MDEC의 패킷 송수신을 위한 프로토콜을 설계하고 네트워크로 전송된 패킷은 CMS에 표시되며 데이터베이스에 저장된다. 본 연구의 결과는 급속히 증가하는 병원내 환자 관리 및 효율적 의료서비스에 기여할 것으로 사료된다.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2016

An uninterruptible power supply (UPS) allows small companies and domestic users to cope with power outages; but existing designs lack flexibility of control and require expensive battery maintenance, with a cost proportional to the outage compensation time. We combine a compact synchronous generator with a battery, with 10% of the capacity that would otherwise be required, to obtain a UPS with reduced maintenance costs for the same performance. Any UPS must respond immediately to a power loss, and our uninterruptible generator supply (UGS) is therefore built around real-time scheduling of its internal operations; this also makes it suitable for integration into the industrial gateway. The UGS is based on a real-time operating system, with an integrated wireless module providing connectivity to a web server, for monitoring and management, which can be performed remotely on a mobile device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.219-220
• /
• 2010

This paper presents the development of LED lighting device monitoring system, Brightness control for LED lighting and Installation of lighting equipment to collect environmental data Intelligent LED lighting control system is presented.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.235-236
• /
• 2014

IEC 60364에서 규정하는 접지방식 중 IT접지시스템은 접지극에서의 전식문제가 없으므로 DC배전계통에 가장 적합한 것으로 전망되고 있다. 그러나 IT접지시스템의 장점을 확보하기 위해서는 운전 중인 전력선의 절연상태를 지속적으로 감시할 필요가 있으며, IEC61557은 IT접지환경에서 전력선의 절연상태를 감시하는 활선절연저항감시장치(Insulation Monitoring Device; IMD)를 설치할 것을 규정하고 있다. 본 논문에서는 활선상태인 전력선의 절연 저항을 모니터링 함으로써 IT 접지시스템의 안정성을 증진시킬 수 있는 활선절연저항감시장치를 개발하고 성능을 검증한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.287-298
• /
• 2001

Change in light transmission characteristics caused by various types of oil contaminations was experimentally measured with a built-in type wear monitoring device. Three kinds of iron powders of different size distribution, carbon dust, two kinds of solutions and grease were used for the lest contaminants in this work. Light intensity of the transmitted light was treasured with the contamination level. Results showed that the transmitted light intensity decreased linearly with the contamination concentration in the oil and the slope was affected by the size distribution. Light attenuation was also caused greatly by carbon dust, water contamination and polymeric fibers mainly due to the light absorption. As a result, it was proved that the optical measurement device could be applicable effectively for detecting any significant change iii lubricating oils.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2021

Recent improvements on the quality, fidelity and availability of biometric data have led to effective human physical activity detection (HPAD) in real time which adds significant value to applications such as human behavior identification, healthcare monitoring, and user authentication. Current approaches usually use machine-learning techniques for human physical activity recognition based on the data collected from wearable accelerometer sensor from a single wearable smart device on the user. However, collecting data from a single wearable smart device may not provide the complete user activity data as it is usually attached to only single part of the user's body. In addition, in case of the absence of the single sensor, then no data can be collected. Hence, in this paper, a continuous HPAD will be presented to effectively perform user activity detection with mobile service infrastructure using multiple wearable smart devices, namely smartphone and smartwatch placed in various locations on user's body for more accurate HPAD. A case study on a comprehensive dataset of classified human physical activities with our HAPD approach shows substantial improvement in HPAD accuracy.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.7
• /
• pp.910-916
• /
• 2018

In this paper, we developed a shoulder rehabilitation exercise device and monitoring system to remotely provide rehabilitation system for the ones who need shoulder exercises including the patients with rotator cuff rupture. In order to evaluate the severity of shoulder muscle injury, a total of 4 shoulder rehabilitation exercises ((3) shoulder abduction, (2) shoulder flexion, (3) shoulder abduction with elbow flexion, (4) shoulder extension with elbow flexion) were selected and instructed to be performed with a 3 kg dumbbell for 5 times. For EMG (electromyogram) signal analysis, each subject's maximum voluntary contraction (MVC) was measured. EMG signals reflect the activation level of contracting muscles during dynamic exercises. Six participants' muscle activation levels in posterior deltoid, middle deltoid, upper trapezius, and infraspinatus were measured and compared. The mean power spectrum values in the time and frequency domains were compared between two age-matched groups (20s and 50s). The results showed lower muscle activation in the elderly subjects (n=3) compared to that of the ones in their twenties (n=3).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.377-384
• /
• 2009

In this paper, leakage current sensing module of SoC(System on Chip)type and real time monitoring system under consideration of electromagnetic interface in power trunk line are developed. The first, leakage current sensing module of SoC type under consideration of electromagnetic interface is developed, and the developed sensing module of SoC type is composed of leakage sensing part, power supply part, interface part, communication part, AD(Alternating current to Direct current)convert part and amplification part. And also the electromagnetic compatibility is evaluated by conduction and radiation of EMI(Electromagnetic Interference) for developed sensing module. The developed system can have confidence, stability and do energy saving under mixed electric circumstance of the low voltage communication device and high voltage equipment. The second, the real time remote monitoring system is developed using designed wire and wireless communication module with leakage current sensing module of SoC type. The developed real time remote monitoring system can monitor sensing state, occurrence state of leakage current and alarm for each step etc.. And the device configuration, PCB layout for leakage current sensing module of system on chip type and the experiment configuration in consideration of EMI are presented. Also the measurement results of conduction and radiation for EMI are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1337-1362
• /
• 2020

Advances in localization-based technologies and the increase in ubiquitous computing have led to a growing interest in location-based applications and services. High accuracy of the position of a wireless device is still a crucial requirement to be satisfied. Firstly, the rapid development of wireless communication technologies has affected the location accuracy of radio monitoring systems employed locally and globally. Secondly, the location is determined using standard complex computing methods and needs a relatively long execution time. In this paper, two geolocalization techniques, based on trigonometric and CORDIC computing processes, are proposed and implemented for Bluetooth-based indoor monitoring applications. Theoretical analysis and simulation results are investigated in terms of accuracy, scalability, and responsiveness. They show that the proposed techniques can locate a target wireless device accurately and are well suited for timing estimation.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.195-198
• /
• 1994

A bubble counter was designed and fabricated for the measurement of gas production rate on the basis of number of bubbles produced from yeast fermentor. The sensor was consisted of bubble forming device and electronic signal processing circuitry. The bubble forming device was built with bubble collector and liquid cell to form uniform size of bubble. Bubbles were counted by pulses formed by photo-interrupter circuitry having 8-bit binary latch counter. The gas production rate curves on the basis of bubble counted showed a good agreement to that of growth curves obtained by the optical measurement method. The sensor was succesfully applied to monitoring of the nutrient utilization test with glucose and galactose media.