• 폴리머
• /
• 제38권6호
• /
• pp.735-743
• /
• 2014

폴리프로필렌의 분자량 및 분자량 분포를 예측하기 위해 레오메터, 고유점도측정기 및 MI(melt index) 기기 등을 이용하여 유변 물성을 측정하였고, 분자구조해석에는 GPC가 사용되었다. 기존에 사용되어온 동적진동측정을 이용한 교차 모듈러스에서 결정된 유변학적 PI(다분산 지표)와 변형된 Carreau 모델을 이용하여 계산된 분포 폭 매개변수(distribution broadness parameter)를 분자량 분포와의 관계를 비교해보았다. 유변학적 PI의 경우 이론적 근거가 부족하고, 압출에 의해 재 생성된 폴리프로필렌 시료에 대해서는 분자량 분포와 잘 일치하지만 반응기에서 중합된 시료 즉, 분자량 분포가 넓거나 다른 경우 잘 일치하지 않는다는 보고가 지배적인데 비해 분포 폭 매개변수는 폴리프로필렌의 전단담화의 정도를 직접적으로 측정하는 것으로 분자량 분포를 잘 예측할 수 있음을 알았다.

• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.847-850
• /
• 2007

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.413-418
• /
• 2006

Sodium hyaluronate (NaHA), water soluble polymer having ultra-high molecular weight, is characterized by using on-line frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) and multiangle light scattering (MALS). This study demonstrates the capability of power programming FI-AFlFFF for the separation of NaHA and the applicability of FI-AFlFFF with MALS for the characterization of molecular weight distribution and their structural information. Since sample injection and relaxation in FI-AFlFFF are achieved by using hydrodynamic relaxation, separation of high molecular weight polymers can be achieved smoothly without halting the separation flow. Experiments are carried out with the two different NaHA products (a raw NaHA sample and a thermally degraded NaHA product) and molecular weight distribution and conformations in solution are determined. Influence of sample filtration on the change of molecular weight distribution is also discussed.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.621-625
• /
• 2003

In order to investigate the properties of aqueous fibroin solution, the molecular weight distribution of silk fibroin was determined by gel filtration chromatography. The molecular weights spreaded from 200 kDa to less than 20 kDa. The distribution of molecular weight was significantly affected when the pH of solubilization solution is less than 1. Distributions of fibroin solution stored at various condition were also investigated.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.141-155
• /
• 2000

To examine how the difference of molecular weight distribution of cellulase influenced the beating process according to surface pore size of the fiber, high molecular weight enzyme and low one were applied to soft wood pulp, hard wood pulp, cotton linter pulp. Some enzymes with the distribution of low molecular weight penetrated into cellulose in the proportion of surface pore size and the results were negative as like : the low viscosity, decrease of refining Yield, decrease of fine fibers content and so on. But in cotton linter pulp in the small surface area, the fiber softness was increased and it had a positive result that the paper intensity was high. Other enzymes with the distribution of high molecular weight had an enzyme reaction on the most surfaces of cellulose. They were effective in eliminating the fuzz of hydrophile fine fibers and the freeness was increased.

• KSBB Journal
• /
• 제13권1호
• /
• pp.114-118
• /
• 1998

실크의 피브로인 단백짐의 가수분해에 의한 실크 펠타이드의 제조를 위하여 설크의 가용화 조건이 분자량 분포에 미치는 영 향을 고찰하였다 염 화칼숨, ethylenediamine 및 황산에 의해 가용화된 실크의 평균 분자량은 각각 41600, 3308과 1268 dalton 으로서 염화칼숨을 제외한 나머지 두 가용화 방법에서 평균 분 자량이 수천 dalton인 실크 용액을 얻을 수 있었으며 분산계수 는 3-4의 범위뜰 보였다. 가용화 및 분말화한 후 6시간 동안 단백질 분해효소 처리에 의하여 600-1200 dalton의 중량평균 분 자량을 갖는 살크 접타이드틀 얻을 수 있었다. 24시간 염산에 의한 산분해 처리에 의해 얻은 실크 웹타이드의 평균 분자량은 145 dalton으로 80%의 높은 유리 아미노산 함량을 나타내었다. 여러가지 가용화 방법 및 가수분해 방법 중 낮은 농도의 황산용 액으로 우선 실크를 가용화한 후 중화 및 효소처리에 의해 웹타 이드로 가수분해하는 방법이 과도한 아미노산의 유리를 억제하 면서 분자량의 조절도 용이할 것으로 판단되었다.

• Mass Spectrometry Letters
• /
• 제12권3호
• /
• pp.81-84
• /
• 2021

Collagen, which accounts for one-third of human protein, is reduced due to human aging, and much attention is focused on making collagen into food to prevent such aging. Gel permeation chromatography with Reflective Index (RI) detection (GPC/RI) was chosen as the most suitable instrument to confirm molecular weight distribution, and we explored the use of this technique for analysis of collagen peptide molecular sizes and distributions. Data reliability was verified by matrix-assisted laser desorption/ionization coupled to time-of-flight (MALDI-TOF) mass spectrometric analysis. The data were considered meaningful for comparative analysis of molecular weight distribution patterns.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.471-481
• /
• 2017

As the molecular weight (MW) of urea-formaldehyde (UF) resins had a great impact on their properties, this work was conducted to study effect of analytical parameters of gel permeation chromatography (GPC) on the MW measurement of UF resins. GPC parameters such as flow rate, column, detector temperature, and sample injection temperature were selected to compare number-average molecular weight (Mn), weight-average molecular weight (Mw), molecular weight distribution (MWD) and polydispersity index (PDI) of two UF resins with different viscosities. As expected, UF resin with higher viscosity resulted in greater Mn and Mw than those of low viscosity UF resin. When the flow rate increased, both Mn and Mw of UF resins decreased and MWD became narrower. By contrast, both Mn and Mw increased and MWD became wide when the column, detector, and sample injection temperature increased. The column, detector, and sample injection temperature of $50^{\circ}C$ at a flow rate of $0.5m{\ell}/min$ resulted in the highest MW and broadest MWD for the GPC analysis. These results suggest that the apparent molecular size or a hydrodynamic radius of UF resin molecules dissolved in the mobile phase affect to Mn, Mw and MWD.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.104-111
• /
• 1998

The Dongbok lake water before and after alum coagulation and activated carbon adsorption were analyzed in terms of organic contents, molecular weight distributuin (MWD), and UV-absorbance. Dissolved organic compounds in the Dongbok lake were fractionated into three molecular size classes by gel permeation chromatography. The fractionation was reasonably successful in isolating compounds with The bulk of the dissolved carbon was present in compounds of molecular weight in the range of 3,000~10,000. Alum coagulation preferentially treated molecules of high molecular weight, which has molecules larger than 10,000. The dissolved organic carbon (DOC) removal after activated carbon adsorption was high in the Fraction B , IR . The $A_{260}$/DOC ratio after alum and activated carbon treatment the Fraction II, III. This results suggest that the organics remaining after each treatment has a trihalomethane formation potential