• 전기의세계
• /
• 제26권2호
• /
• pp.89-94
• /
• 1977

In order to investigate the properties of radiation resistance together with dielectric, and mechanical relaxation behaviors of polyvinylcholoride exposed to several different doses under the .gamma.-ray of Co$^{60}$ source, several observations were carried out on the exposed specimens propared by mixing dibutyl-tin-dilaulate and dibutyl-tin-dimaleate as stabilizer with or without adding dioctyl-phthalate as plasticizer. Conclusions obtained from the study are as follows: The origin of the absorption band at 1,540-1,640$cm^{-1}$ / on I.R. spectrum seems to be RCOO- ion originated from ionization of the stabilizer, and this peak can be useful as a measure of radiation resistance on polyvinylchloride. Addition of increasing plasticizer to polyvinylchloride exhibits increasing radiation resistance and the reason for this result may be attributed to aromatic resonance absorption of radiation energy by diotylphthalate. On dose dependent dielectric characteristics, nonplastized specimen shows a peak at about 10 Mrad and that this peak disappears on the plastification of specimens. Those phenomena may be explainable in considering the statistical distribution of scissored chain molecular segments as well as the plastification process of plasticizer to polyvinylchloride chain molecules.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.116-121
• /
• 2003

In this study, the thermal degradation process has been investigated at various reaction temperature$(350{\sim}400^{\circ}C)$ and times$(30{\sim}120\;min)$ in order to recycle waste plastic films as solid state wax. Waste plastic films were easily melted by adding a small amount of waxes. The effects of wax addition and nitrogen flow rate on their thermal degradation properties were investigated. FT-IR, GPC and viscometer were used to analyze properties of the solid wax including the structure, molicular weight distribution and melt viscosity. The average molecular weight of solid wax was decreased with increasing the reaction time, temperature and amount of wax added, Also, the viscosity of solid wax decreased with increasing the stirring speed at a constant reaction temperature and time, and its viscosity got close to zero above $390^{\circ}C$.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.283-290
• /
• 2003

Organic drugs including aspirin, omeprazole, and naproxen with three different levels of octanol/water partition coefficient were examined for their release behavior from the amphiphilic PCL-b-PEO-b-PCL (PCEC) matrix. Scanning electron micrograph (SEM) of PCEC illustrated a well defined two-phase morphology consisted of dispersed poly(ethylene oxide) (PEO) domain and continuous polycaprolactone (PCL) phase. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) experiments veri tied that three model drugs are dissolved as a molecular dispersion in PCEC matrix. The release of hydrophilic aspirin closely followed the water absorption profile of the matrix indicating that its major fraction is present in PEO domain. However, substantial amount of aspirin present in less hydrophilic region displayed discontinuous biphasic release pattern. In the case of omeprazole with intermediate hydrophobicity consistent release behavior was observed for a period of 24 hrs after the rapid liberation of ca. 10% of the drug presumably partitioned in PEO phase. It was ascribed to the fact that the progressive hydration of PCEC matrix gradually increased the chance of drug/water exposure to compensate the exhaustion of device. Naproxen with the highest octanol/water distribution coefficient among three model drugs exhibited a limited release of 35% for 24 hrs. Finally, hydroxypropyl methylcellulose phthalate (HPMCP)/PCEC blend matrix demonstrated an accelerated and quantitative release of hydrophobic naproxen by generating high porosity and thereby expanding polymer/water interface.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.165-172
• /
• 2014

The distribution of basic nitrogen-containing compounds in three vacuum gas oils (VGOs) with different boiling ranges and their dewaxed oils from the lube base oil refining unit of a refinery were characterized by positive-ion electrospray ionization (ESI) Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). It turned out that the composition of basic nitrogen compounds in the samples varied significantly in DBE and carbon number, and the dominant basic N-containing compounds in these oil samples were N1 class species. $N_1O_1$, $N_1O_2$, and $N_2$ class species with much lower relative abundance were also identified. The composition of basic nitrogen compounds in VGOs and dewaxed VGOs were correlated with increased boiling point and varied in DBE and carbon numbers. The comparison of the analytical results between VGOs and dewaxed VGOs indicated that more basic N-containing compounds in VGO with low carbon number and small molecular weight tend to be removed by solvent refining in lube base oil processing.

• 한국결정학회지
• /
• 제14권1호
• /
• pp.16-23
• /
• 2003

β-MnO₂ 전자상태와 화학결합을 하트리-폭-슬레이터 근사를 사용하는 제 1원리 분자 궤도법의 일종인 DV-X/sub α/ 법에 의해 이론적으로 조사하였다. 벌크상의 β-MnO₂에 대한 상태를 해석하기에 적합한 클러스터 모델을 결정하기 위하여, 여러 가지 다른 크기를 지닌 수종의 클러스터 모델들에 대한 계산을 행하였다. 실험적으로 측정된 XPS와 이론적으로 계산된 XPS를 비교함으로써, Mn/sub 15/O/sub 56/ 모델이 β-MnO₂의 전자 상태와 화학 결합을 계산하기에 가장 적합한 모델임을 결정하였다. 이 모델을 사용하여 에너지 준위, 상태 밀도, 유효 공유 결합 전하, 유효 전하, 전자 밀도 분포를 구하고, 이에 대한 고찰을 행하였다.

• 폴리머
• /
• 제27권6호
• /
• pp.596-602
• /
• 2003

고분자 유화제를 2-에틸헥실 아크릴레이트와 n-부틸 아크릴레이트 그리고 아크릴산 단량체를 사용하여 단량체 조성과 분자량을 변화시켜 용액중합에 의해서 합성하였다. 합성된 고분자 유화제를 이용하여 반연속식 유화중합을 통해 수성 아크릴 에멀션 점착제를 제조하였다. 그 결과, 입자크기는 약 145 nm 정도로 전형적인 유화제에 비해 상대적으로 작게 나타났고, 입자크기분포도는 단분산적 형태를 보였다. 에멀션을 이용한 동결-해빙 시험결과 기존 유화제를 사용한 경우 2회 반복 후 응집이 발견되었으나, 고분자 유화제의 경우 7회 반복 후에도 응집이 보이지 않아 저장안정성이 매우 우수함을 나타냈다. 접착시험 결과 초기점착력과 점착력은 고분자 유화제의 분자량이 증가함에 따라 또한 아크릴산 함량이 높을수록 감소하는 경향을 나타내었고, 반면 유지력은 증가하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.81-90
• /
• 1992

The effect of acid treatment of cellulose on the substitution charateristics of carboxymethylation was studied in this paper. Five samples of hydrocellulose(HC), all prepared from ${\alpha}$-cellulose by hydrolysis with five reaction times and determined on average molecular weight and polydispersity, were carboxymethylated to carboxymethyl cellulose (CMC). The CMCs from HCs were examined upon degree of substitution(DS), distribution of carboxymethyl groups in anhydroglucose units of the cellulose, and unsubstituted anhydroglucose(USAG) content. The DS of CMCs increased with increasing the hydrolysis time except CMC from HC at 1 hour hydrolysis time. In carboxymethylation the availability of hydroxyl groups on anhydroglucose units in HCs was the highest on OH(2), and the relative availability of OH(6) increased with the increasing of the hydrolysis time. The USAG contents were more deviated than that calculated based on Spurlin's model, and had a strong tendency of decreasing with increasing the hydrolysis time. The reactivity of HC was lower than that of ${\alpha}$-cellulose and the relative availability of OH(6) in HC increased with the hydrolysis time.

• 상하수도학회지
• /
• 제33권6호
• /
• pp.447-456
• /
• 2019

This study focused on natural organic matter and trihalomethane removal by ozonation with various ferrous concentration in surface water. Ozonation is more affected by injection concentration than reaction time. dissolved organic carbon removal rates in ozonation increased with the increase in ferrous concentration. The highest removal was obtained at 6 mg/L of ferrous concentration. When 1 mg/L of ferrous was added with 2 mg/L of ozone concentration, it was found to be a rapid decrease in specific ultraviolet absorbance at the beginning of the reaction because ferrous acts as a catalyst for producing hydroxyl radical in ozonation. As ozone concentration increased, trihalomethane formation potential decreased. When 2 mg/L of ozone was injected, trihalomethane formation potential was shown to decrease and then increase again with the increase in ferrous concentration.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.698-705
• /
• 2016

본 연구는 메탈로센 촉매를 이용한 폴리에틸렌 왁스의 중합과 그 특성에 관한 연구를 진행하였다. 폴리에틸렌 왁스 중합에 사용되는 다양한 중합 조건을 시도하였다. 낮은 분자량을 갖는 폴리에틸렌 중합에 널리 이용되는 Ziegler-Natta 촉매와는 다른 여러가지 구조의 리간드를 갖는 다양한 메탈로센 촉매가 중합 특성에 미치는 영향에 대한 연구와 촉매의 수소 반응성에 관한 연구를 진행하였다. 또한 연쇄이동제인 수소량에 따른 분자량의 변화와 에틸렌 가스의 비율에 따른 분배를 관찰하였다. 마지막으로 본 연구에서는 폴리에틸렌 왁스의 중합에 적합한 메탈로센 촉매 구조를 제안하였다.