• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.34-42
• /
• 1999

The present investigation has focused up on the study of the adsorption of three different molecular mass fractions of a polyDiMethylDiAllylAmmoniumChloride (DMDAAC) (8750(LM\ulcorner), 48000(MM\ulcorner) and 1200000(HM\ulcorner)) on bleached chemical fibres. Both kinetics of adsorption and equilibrium adsorption measurements have been conducted and each adsorption has been measured by polyelectrolyte titration. The results show that the LM\ulcorner polymer can reach all of the charges in the fibre wall whereas the MM\ulcorner and HM\ulcorner can only reach the external surfaces of the fibres. It is also shown that the kinetics of adsorption of the LMw polymer is not at all affected by the presence of a saturated layer of HMw polymer on the surface of the fibres. Finally, the results from the investigation show that it is possible to have full coverage of the external surface of the fibres by a high molecular mass polymer and a full coverage of the internal surface of the fibres with a low molecular mass polymer. This is true if the high molecular masspolymer is added first followed by addition of the low molecular masspolymer.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.805-813
• /
• 2013

In this study, molecular size distribution of natural organic matter (NOM) after ozonation was measured and its effect on adsorption capacity of activated carbon was investigated. According to the results, the molecular size of NOM was limitedly changed. Specifically, the molecular size of NOM between 5,000 to 10,000 Da were slightly decreased with increasing ozone doses. The adsorption capacity after ozonation was evaluated using Freundlich isotherm with ideal adsorbed solution theory (IAST) which simulated the multi components adsorption. Further, mini-column test was conducted. The Freundlich constant, K was reduced after ozonation and the non-adsorbable fraction was increased with ozonation. However, no correlation between K and ozone doses was found. The present study also agreed with the correlation between adsorption capacity and pore size characteristics of activated carbon.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.104-111
• /
• 1998

The Dongbok lake water before and after alum coagulation and activated carbon adsorption were analyzed in terms of organic contents, molecular weight distributuin (MWD), and UV-absorbance. Dissolved organic compounds in the Dongbok lake were fractionated into three molecular size classes by gel permeation chromatography. The fractionation was reasonably successful in isolating compounds with The bulk of the dissolved carbon was present in compounds of molecular weight in the range of 3,000~10,000. Alum coagulation preferentially treated molecules of high molecular weight, which has molecules larger than 10,000. The dissolved organic carbon (DOC) removal after activated carbon adsorption was high in the Fraction B , IR . The $A_{260}$/DOC ratio after alum and activated carbon treatment the Fraction II, III. This results suggest that the organics remaining after each treatment has a trihalomethane formation potential

• 한국표면공학회지
• /
• 제25권3호
• /
• pp.144-149
• /
• 1992

The adsorption and molecular sieve characteristics of water, methanol, ethanol, butanol and benzene on acid-alkali treated natural zeolite from Kampo area were investigated by the Diamond·Kinter method, and it was compared with synthetic zeolite A. Adsorption amount of water increased with the treatment of acid rather than the treatment of alkali. Similar tendency was observedd in adsorption of alcohols such as methanol, ethanol and butanol, but the amount of adsorption decreased. From the views of the molecular size, adsorption amount of benzene decreased because of surface activity according to the cations species rather than chemical treatment. And it was almost same value that the amount of adsorption was compared acid treated natural zeolite with synthetic zeolite A.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.747-754
• /
• 2009

본 연구에서는 $1,000^{\circ}C$에서 24시간 열처리된 활성탄에서 다이옥신과 유사구조를 갖는 o-DCB(ortho-dichlorobenzene)의 등온흡착식을 실험을 통하여 구하였고, 분자모사를 통하여 예측하였다. 실험으로 분석된 활성탄의 분자식 및 작용기 비율을 바탕으로 초기 활성탄 기본구조를 설계한 후, COMPASS(condensed-phase optimized molecular potentials for atomistic simulation studies) force field를 이용하여 이 구조를 최적화하였다. 최적화된 활성탄 분자구조에서 공극률, 비표면적, 및 입자밀도의 모사결과는 실험값과 비교되었고, 이들에 대한 실험과 모사결과의 오차는 각각 7.62, 3.79, 2.80%를 보여주었다. 통계 열역학적 방법인 GCMC(Grand Canonical Monte Carlo) 기법을 이용하여, 최적화된 활성탄 구조에서 온도에 따른 o-DCB의 등온흡착 상수값을 예측하였으며, 이 모사결과는 실험값과 비교될 때, 3% 이하의 오차를 보였다. o-DCB의 흡착특성을 바탕으로 확인되어진 활성탄 구조에서 다이옥신의 일종인 2,3,7,8-TCDD(tetrachlorodibenzo-p-dioxin) 등온흡착상수, 흡착열, 그리고 기공확산계수를 최종적으로 구함으로서, 실험적으로 구하기 힘든 맹독성 잔류성 유기물질의 흡착특성을 분자모사기법을 통하여 예측하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1549-1553
• /
• 2008

A molecular imprinted polymer (MIP) using (+)catechin ((+)C) as a template and acrylamide (AM) as a functional monomer was prepared. Acetonitrile was used as the porogen with ethylene glycol dimethacrylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The adsorption isotherms in the MIP were measured and the parameters of the equilibrium isotherms were estimated by linear and nonlinear regression analyses. The linear equation for original concentration and adsorpted concentrations was then expressed, and the adsorption equilibrium data were correlated into Langmuir, Freundlich, quadratic, and Langmuir Extension isotherm models. The mixture compounds of (+)C and epicatechin (EC) show competitive adsorption on specific binding sites of the (+)catechin-MIP. The adsorption concentrations of (+)C, epicatechin (EC), epicatechin gallate (ECG), and epigallocatechin gallate (EGCG), on the (+)catechin-molecular imprinted polymer were compared. Through the analysis, the (+)catechin-molecular imprinted polymer showed higher adsorption ability than blank polymer which was synthesized molecular imprinted polymer without (+)catechin. Furthermore, the competitive Langmuir isotherms were applied to the mixture compounds of (+)C and EC.

• 한국표면공학회지
• /
• 제26권6호
• /
• pp.285-290
• /
• 1993

A series of samples were prepared by treating natural zeolite from Kampo area with HCl and NaOH. And, the adsorption characteristics of some liquid samples were investigated by the Diamond-Kinter method. The adsorption amount of all liquid investigated was more effective in acid treatment than in alkali treatment. In the case of n-, iso-C3H7OH, thed adsorption amount of n-form which has smaller molecular size was larger. Similar tenedncy was observed in n-, iso-C4H9OH, but the amount was lower than n-, iso-C3H7OH. In CHCl3 and CCl4, that of CHCl, which is smaller molecular size and has polarity, was far lager. From the view of the molecular size, adsorption amount of C6H5CH3 and p-C6H4(CH3)2 showed the characteristics of surface activity rather than chemical treatment.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1087-1094
• /
• 2008

본 연구는 활성탄을 사용한 n-hexane의 흡착공정에 있어서 분자수준에서 시작하여 공정단계에 이르는 다중규모 모사에 관하여 기술한다. 분자모사에서는 GCMC(Grand Canonical Monte Carlo) 방법을 이용하여 활성탄에서 n-hexane의 등온흡착식을 예측하고, 2차원 전산유체역학(CFD; Computational fluid dynamics) 모사를 통하여 흡착컬럼 내 유체흐름에 대한 수력학적 특성을 파악한다. 공정모사단계에서는 분자모사 및 유체역학 모사에서 각각 얻은 등온흡착식과 축방향 확산계수값을 이용하여 n-hexane의 용출곡선을 얻는다. 이러한 3단계 다중규모 모사기법을 활용하여 얻은 공정모사 결과는 펄스응답의 실험결과와 비교해볼 때, 온도와 유량변화에 따른 1차 모멘트(평균 체류시간)에 관하여 약 20% 미만의 오차범위에서 일치함을 확인할 수 있다. 이 결과로부터 분자수준에서 시작하는 다중규모 모사는 필요한 실험횟수를 줄이면서 흡착공정 개발을 가속화할 수 있는 가능성을 보여준다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.197-197
• /
• 2011

In this study, in contrast with cases in which Scanning Tunneling Microscopy (STM) tip-induced reactions were instigated by the tunneling electrons, the local electric field, or the mechanical force between a tip and a surface, we found that the tungsten oxide (WO3) covered tungsten (W) tip of a STM acted as a chemical catalyst for the S-H dissociative adsorption of phenylthiol and 1-octanethiol onto a Ge(100) surface. By varying the distance between the tip and the surface, the degree of the tip-catalyzed adsorption could be controlled. We have found that the thiol head-group is the critical functional group for this catalysis and the catalytic material is the WO3 layer of the tip. After removing the WO3 layer by field emission treatment, the catalytic activity of the tip has been lost. 3-mercapto isobutyric acid is a chiral bi-functional molecule which has two functional groups, carboxylic acid group and thiol group, at each end. 3-Mercapto Isobutyric Acid adsorbs at Ge(100) surface only through carboxylic acid group at room temperature and this adsorption was enhanced by the tunneling electrons between a STM tip and the surface. Using this enhancement, it is possible to make thiol group-terminated surface where we desire. On the other hand, surprisingly, the WO3 covered W tip of STM was found to act as a chemical catalyst to catalyze the adsorption of 3-mercapto isobutyric acid through thiol group at Ge(100) surface. Using this catalysis, it is possible to make carboxylic acid group-terminated surface where we want. This functional group-selective adsorption of bi-functional molecule using the catalysis may be used in positive lithographic methods to produce semiconductor substrate which is terminated by desired functional groups.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2553-2559
• /
• 2012

The adsorption properties of benzene, toluene, p-xylene in MCM-41 with heterogeneous and cylindrical pore were studied using grand canonical ensemble Monte Carlo simulation. The simulated isotherms were compared with experimental ones, and the different adsorption behaviors in MCM-41 with pore diameters of 2.2 and 3.2 nm were investigated. The simulated adsorption amounts above the capillary-condensation pressure agreed with the experimental ones. The simulation results showed that most molecular planes were nearly parallel to the pore axis. This orientation was not affected by the molecular position in the pore. The molecular planes were nearly parallel to the pore surface for the adsorbate molecules close to the pore wall, and the molecules in the MCM-41 with the pore diameter of 3.2 nm were ordered along the pore axis.