• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.253-258
• /
• 2012

주조 유동 해석 분야에서 형상 고정 격자계(body-fitted coordinate; BFC)의 적용은 양질의 해석결과를 얻을 수 있음에도 불구하고 격자 생성의 어려움과 효율성으로 인해 많이 사용되지 않고 있다. 반면에 직교 격자계(Cartesian coordinate)는 상대적으로 격자 생성이 쉽고 빠르기 때문에 주조 공정에서 주로 사용되어 왔으나 이 역시 형상을 제대로 표현하지 못함으로써 발생하는 문제들로 인해 올바른 해석 결과를 얻을 수가 없다. 본 연구에서는 PCT(Partial Cell Treatment)를 기반으로 하는 Cut Cell 방법을 직교 격자계에 적용함으로써 이 격자계의 장점은 유지하면서도 정확한 유동 해석 결과를 얻을 수 있었다. Cut Cell 방법으로 간단한 형상의 테스트와 실제 주조 제품에 대한 적용을 해보았다.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.20-25
• /
• 2013

In various manufacturing industries, an in-mold decoration (IMD) process for plastic objects is widely utilized because a film forming and an injection molding processes run simultaneously. In the present study, the deformation of polymer film and filling of resin in the IMD process were numerically investigated to evaluate the quality of the plastic object formed by the IMD process, which consists of thermoforming and injection molding processes. To obtain the initial shape of the polymer film during the injection molding process, the deformation of the polymer film in the thermoforming process was pre-formed using the vacuum conditions to attach the film to a cavity. Since the properties and deformation of polymer film are greatly affected by the behavior of polymer resin being injected into a mold cavity, numerical simulations for the injection molding and film forming were performed with one-way coupling method. The results showed that the injected resin could lead to the tearing of the polymer film in local regions near the corners. In order to verify the proposed numerical methodology, the numerical results of the deformation patterns printed on the initial polymer film were compared with the experimental data. The proposed methodology to couple film forming analysis with injection molding analysis can be used to predict the deformation of film in IMD process.

• Composites Research
• /
• 제17권3호
• /
• pp.1-7
• /
• 2004

최근 대형 복합재료 구조물 성형에 적합한 공정으로 주목받는 vacuum assisted RTM (VARTM) 공정에 있어, 보강섬유의 조직 내부에 잔류하는 공기를 제거하여 기공함유율을 낮추는 기술의 중요성이 인식되고 있다. 거대기공 혹은 불완전 함침영역은 부적절한 주입구 및 공기배출구의 위치, 혹은 금형의 형상에 의해 발생한다. 미세기공은 불균일한 수지 유동선단의 속도로 인해 유동선단 부분에서 집중적으로 형성되며, 금형충전 공정 도중 수지와 함께 이동한다. 성형이 완료된 제품내의 잔류 기공들은 완성품의 물리적 성질을 저하 및 제품의 파손을 초래할 수 있다. 본 연구에서는 VARTM 공정에서의 기공의 형성 및 이동을 해석할 수 있는 통합된 거시적/미시적 해석 방법을 개발하였다. 수치해석 프로그램을 개발하여 VARTM 공정에서의 3차원 수지 유동을 해석하였으며, 그에 따른 거대기공 및 미세기공의 분포를 예측하였다.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.30-35
• /
• 2021

The casting method uses a mold to solidify a liquid metal to make a solid metal. Since it uses a liquid metal with the least deformation resistance, it has the characteristic that it can easily manufacture even a complex shape. However, the process of solidifying a liquid metal into a solid metal inevitably involves a volume change and contains internal defects such as shrinkage holes. Therefore, in the design of the casting plan, an excess volume called a pressurization compensates for the volume shrinkage. in the product, and it induces the shrinkage hole defects to occur in parts other than the product1). In this study, casting analysis was performed using casting analysis software (anycasting) in order to optimize the design of the tilting gravity casting method for automobile brackets. In particular, the filling and solidification analysis according to the shape and volume of the pressurized metal was conducted, and applied to the actual product to study the effect of the pressurized metal on the shrinkage defect. Through this study, it is possible to understand the effect of the pressure metal on shrinkage defects in the actual product and propose a design of the pressure metal that improves reliability and productivity.

• 공학기술논문지
• /
• 제10권3호
• /
• pp.285-290
• /
• 2017

Molding of body with ribs is the most difficult during flow molding process. The rib area is easy to be deformed at the rear side due to wall thickness variation. In this study, relationships between molding condition and deflection of rib-shaped part is investigated during the compression molding of fiber reinforced plastic composites, and the following results are derived. Polypropylene(PP), Polystyrene(PS), and stampable sheet(SS 40wt%) show the increment of deflection along with releasing temperature. For the correlation between incremental holding pressure load and deflection, stampable sheet exhibits lower deflection along with higher holding pressure, while PS shows significant increase of deflection with higher holding pressure, PP shows completely different characteristic, significant reduction of deflection along with higher holding pressure. Regarding to mold temperature and deflection, deflection amount of SS is the biggest, and PS shows the smallest. In addition, all three kinds shows the highest amount of deflection at 173C. Deflection is reduced when mold closing speed is increased. Amount of deflection in SS is larger and is not highly dependent on molding conditions like holding pressure and cooling parameters, compared with single component material like PP. This can be elucidated by anisotropic and inhomogeneous characteristics of glass fiber during filling process of stampable sheet composite.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.51-56
• /
• 2006

A computer code was developed to simulate both the thermal stresses introduced during the post-filling stage and the in-plane deformation after ejection process by finite element method based on the plane stress theory. The computer simulation was applied to the mold design of a 2 inch light guide plate (LGP) for thin film transistor (TFT)-liquid crystal displays (LCD). With injection molding experiments based on the design of experiments (DOE) technique, the influences of the processing conditions in injection molding on brightness and uniformity of the LGP were investigated, and the optimal processing parameters were selected to increase the brightness and uniformity. The verification experiment showed that the brightness and uniformity of the LGP were increased dramatically under the selected optimal processing conditions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.201-206
• /
• 2003

Plastic injection mould have two kinds of trouble, one is in mould another in injection parts. Most of defects of the former take the cause in a design like in structure and working, the later weld line, transforming, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems of the later is difficult for making a clear definitely the reason of defects because of complexible. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and rouble of the part of Flat TV Front Cover by flow control method and gas- assisted injection moulding. For minimizing defects from injection moulding parts, this paper was investigated with using computer aided injection mold filling simulations. Based on these numerical results, I established guidelines mould design and injection processing condition. As a results I got the improve of quality, minimizing surface defects moulded parts and troubles in mould.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.966-970
• /
• 2004

Electrophoretic display has recently stimulated tremendous interest due to potential commercialization in the filed of information displays including e-books, e-newspapers, and other low-power portable displays. A new transparent soft mold press (TSMP) process developed in this study was found to give a good electrophoretic display panel with prepatterned micropools for the filling of charged particle slurry. It was also found that charged $TiO_2$ particles with 74.09 mV of zeta potential and 3.11 ${\times}$ $10^{-5}$ $cm^2$/Vs of mobility were successfully prepared.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.43-48
• /
• 2001

To overcome the disadvantages of conventional excavation technology, various trenchless (or excavation free, or no-dig) repair-reinforcement technologies have been developed and tried. But trenchless technologies so fat developed have some brawbacks such as high cost and inconvenience of operation. In this study, a repairing-reinforcing process for underground pipes with glass fiber fabric polymer composites using VARTM(Vacuum Assisted Resin Transfer Molding) has been developed. The developed process requires shorter operation time and lower cost with smaller and simpler operating equipments than those of the conventional trenchless technologies. For the reliable operation of the developed method, a simple method to apply pressure and vacuum to the reinforcement was devised and flexible mold technology was tried. Also, resin filling and cure status during RTM process were monitored with a commercial dielectrometry cure monitoring system, LACOMCURE. From the investigation, it has been found that the developed repairing-reinforcing technology with appropriate process variables and on-line cure monitoring has many advantages over conventional methods.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.1026-1035
• /
• 1987

본 연구에서는 두께방향에 따른 유동을 해석하는데 "fountain effect" 및 열 전달 현상을 동시에 고려하면서 진전하는 자유표면의 형상을 정확히 구하기 위한 유한 요소법을 이용한 수치해석법을 제안하고 그 방법을 적용하여 금형벽의 온도를 변화시 켜가면서 구체적인 유동특성을 해석하였다.특성을 해석하였다.