• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

• Journal of Periodontal and Implant Science
• /
• 제50권3호
• /
• pp.197-206
• /
• 2020

Purpose: The aim of this study was to determine the impact of different compressive forces on deproteinized bovine bone mineral (DBBM) particles covered by native bilayer collagen membrane (NBCM) during alveolar ridge preservation (ARP) in the molar area, and to identify any histomorphometric and clinical differences according to the compressive force applied. Methods: Sockets were filled with DBBM after tooth extraction, and different compressive forces (30 N and 5 N, respectively) were applied to the graft material in the test (30 N) and control (5 N) groups. The DBBM in both groups was covered with NBCM in a double-layered fashion. A crossed horizontal mattress suture (hidden X) was then made. A core biopsy was performed using a trephine bur without flap elevation at the implant placement site for histomorphometric evaluations after 4 months. The change of the marginal bone level was measured using radiography. Results: Twelve patients completed the study. The histomorphometric analysis demonstrated that the mean ratios of the areas of new bone, residual graft material, and soft tissue and the implant stability quotient did not differ significantly between the groups (P>0.05). However, the mean size of the residual graft material showed a significant intergroup difference (P<0.05). Conclusions: The application of 2 compressive forces (5 N, 30 N) on particulate DBBM grafts during open-healing ARP in the posterior area led to comparable new bone formation, implant feasibility and peri-implant bone level.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.47-51
• /
• 2010

A powder, containing 80 percent of blue cobalt aluminate $(CoAl_2O_4)$ crystallites, was synthesized at $210 ^{\circ}C$ using a (metal nitrate-malonic acid-ammonium hydroxide-ammonium nitrate) system. The optimal amount of concentrated ammonia water and initial decomposition temperature were determined for the blue $CoAl_2O_4$ crystallites preparation. Three $CoAl_2O_4$ precursor pastes, corresponding to the various amounts of concentrated ammonia water, were prepared by evaporating the initial solutions in an electric furnace fixed at $80 ^{\circ}C$ under a vacuum of 25 torr. The initial solution was used to dissolve the starting materials. The powder with the maximum content (80%) of blue $CoAl_2O_4$ crystallites was prepared when the prepared precursor was decomposed at $210 ^{\circ}C$. The blue $CoAl_2O_4$ crystallite content in the prepared sample decreased with increasing initial decomposition temperature. For 0.2 mole of the $Al^{3+}$ ion, the chemical compositions of the precursor corresponded to molar ratios of 0.4, 1.40, 2.56 and 2.00 for the $Co^{2+}$ ion, malonic acid, ammonia and ammonium nitrate per mole of the $Al^{3+}$ ion, respectively. The blue $CoAl_2O_4$ crystallite content in the sample decreased with the amount of ammonia deviated from the optimal value. The characteristics of the powders were examined using X-ray diffraction, optical microscopy, Fourier transformation infrared spectroscopy and the Brunauer-Emmett-Teller technique.

• 대한화학회지
• /
• 제27권4호
• /
• pp.287-293
• /
• 1983

자유라디칼 개시제에 의한 디에틸 ${\alpha}$-페닐비닐 인산(DEPVP)과 아크릴로니트릴(AN) 및 말레산 무수물(MAnh)의 혼성중합 연구를 행하였다. 개시제로는 과산화벤조일을 사용하였으며 중합온도는 $70^{\circ}C$이었다. 단위체 반응성비는$ r_1(AN) = 0.77, r_2(DEPVP) = 0.002 $이었으며, 이 값으로 부터 DEPVP의 Alfrey-Price 상수 Q=0.012, e=-1.35를 얻었다. 이와 대조적으로 DEPVP와 MAnh와의 자유라디칼 혼성중합은 과산화 벤조일을 개시제로 사용하여 $70^{\circ}C$에서 클로로포름 용액중에서 행한 결과 초기 단위체의 농도비에 무관하게 1 : 1 교대 혼성 중합체를 형성하였으며, 두 단위체의 몰비가 MAnh / DEPVP = 7 / 3일때 중합속도가 최대였다. 핵자기 공명 분광법으로 구한 DEPVP와 MAnh의 전하이동 착물의 평형상수는 $21^{\circ}C$ 클로로포름 용액에서 0.085 l/mol이었다. 혼성 중합체중 DEPVP의 함량이 증가함에 따라 AN/DEPVP 쌍에서는 환산점성도가 감소함을 보였고 MAnh/DEPVP쌍에서는 변화가 별로 없었다

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1364-1368
• /
• 2008

The activity of the catalytic system composed of Fe$(acetylacetonate)_3$ (Fe$(acac)_3$), triphenylphosphine, and diethylaluminum chloride for the dimerization of bicyclo[2.2.1]hepta-2,5-diene (2,5-norbornadiene, NBD) to produce hexacyclic endo-endo dimer (hexacyclo[$7.2.1.0^{2,8}.1^{3,7}.1^{5,13}.0^{4,6}$]tetradec-10-ene, Hnn) was significantly enhanced by the presence of $AlCl_3$, especially at the molar ratios of NBD/Fe$(acac)_3$ of 500. XPS analysis of the catalytic systems clearly demonstrates that $AlCl_3$ facilitates the reduction of Fe$(acac)_3$ to form active species, Fe(II) and Fe(0) species. The layer separation was observed when [BMIm]Cl was used along with $AlCl_3$, but catalyst recycle was not very successful.

• Macromolecular Research
• /
• 제16권1호
• /
• pp.57-61
• /
• 2008

Chitosan is normally acylated and subsequently conjugated with drugs for biomedical applications. This study examined the relationship between the succinylation and gelation behaviors of glycol chitosan. Glycol chitosan was acylated with succinic anhydride under a wide variety of reaction conditions, such as different molar ratios of succinic anhydride to glucosamine, different methanol content in the reaction media, and different reaction temperatures. Among these reaction parameters, the methanol content in the solvent played an important role in determining the regioseletive succinylating site. N-succinylation and N-N cross-linking occurred regardless of the reaction conditions. However, O-succinylation was observed under specific conditions, i.e. a methanol content> 0.6 (v/v) and a reaction temperature> $25^{\circ}C$. O-succinylation accelerated the N-O cross-linking of glycol chitosan, and led to gelation. The N-succinylated glycol chitosans were water-soluble, whereas the N-and O-succinylated glycol chitosans fonned a gel. These physico-chemical structural differences in the succinylated glycol chitosans would definitely influence subsequent drug-conjugation reactions and consequently the drug loading and release kinetics.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.254-269
• /
• 2004

Polysilicato-iron coagulant (PSI) is receiving attention in Japan as a substitute for aluminum-based coagulants. In the first part of this article, coagulation, sedimentation and filtration experiments were carried out using kaolin clay particles as the turbidizing material and four types of PSI with various molar ratios of polysilicic acid to ferric chloride (Si/Fe ratio). Results demonstrate that use of a PSI with a high Si/Fe ratio can cause a more dramatic decrease in treated water turbidity but a higher suction time ratio (STR) than when PACl is used. However, optimization by increasing the rapid agitation strength GR is found to greatly improve the STR. In addition, the series of filtration experiments verified that optimization of GR is greatly effective in controlling rapid increases in filter head loss, and also formation of a thin aging layer in the upper part of the filter bed by slow-start filtration is effective in improving filtered water turbidity over the entire filtration process. The second part of this article describes two innovative filtration techniques to increase the particle separation efficiency; (1) coagulant-coated filter medium by enhancing the electrical potential of the surface of the filter medium, and (2) coagulant dosing in influent by controlling the electrical potential of particles entering the filter layer. From the results of the various filtration experiments using a pilot plant, these two techniques were found to be very effective to reduce the effluent water turbidity from the start to the end of a filter run. Moreover, in the filtration experiments using these two methods simultaneously, higher removal efficiency of approximately 3-log (99.7%) was realized, resulting that the finished water turbidity was accordingly reduced to 0.004mg/L.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.193-199
• /
• 2016

자기유변유체(magnetorheological Fluid: MR)를 이용한 차량용 응용장치는 다양한 주행환경에서도 안정적인 제어성능과 신뢰할 수 있는 작동을 요구한다. 하지만 자기유변 유체의 주요한 구성요소로는 철 입자가 포함되어 있으며, 이러한 철 입자는 부식에 매우 취약하여 자기유변유체의 제어특성에 심각한 영향을 미칠 수 있다. 따라서 본 논문에서는 이러한 자기유변 입자의 부식이 전단응력과 같은 자기유변유체의 성능에 미치는 영향을 고찰하고자 한다. 이를 위해 먼저 염화칼슘 수용액을 이용하여 일정시간 동안 MR 철입자를 부식시킨 후 전자현미경(scanning electron microscope: SEM)으로 관찰하고 에너지 분산 X선 기법으로 분자비를 분석함으로써 부식 진행상태를 확인한다. 그리고 부식된 철 입자를 실리콘 오일에 분산하여 자기유변유체를 조성한 다음 회전점도계를 이용하여 부식 전후의 전단응력의 변화를 비교 분석함으로써 자기유변유체를 구성하는 철입자의 부식이 MR 응용장치의 성능에 미치는 영향을 실험적으로 고찰한다. 이러한 연구를 기반으로 향후 철 입자가 부식된 자기유변유체를 실제 응용장치에 적용하여 제어성능에 나타나는 영향할 고찰하여 제어성능을 개선하는 연구로 발전시켜 나갈 예정이다.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.114-118
• /
• 2013

최근 금속자원 재활용과 환경보호에 대한 기술적 필요성에 의해 구리(Cu)를 주성분으로 하는 동합금으로부터 니켈, 주석 등의 유가금속 분리/회수에 대한 관심이 높아지고 있다. 본 연구에서는 동합금에 포함된 유가금속들을 분리/회수하는 기초연구중 하나로서, 킬레이트 수지를 이용하여 동합금 제련시 발생하는 부산물에 포함되어 있는 대표적인 유가금속인 니켈(Ni)을 분리/추출할 수 있는 농축 공정의 가능성에 대해 검토하였다. 킬레이트 수지는 원자량이 높은 $Cu^{2+}$ 이온을 $Ni^{2+}$ 이온보다 선택적으로 흡수하였으며, 이러한 과정을 수차례 반복함으로써 실제 동합금 부산물 샘플의 $Ni^{2+}$ 및 $Cu^{2+}$ 이온을 농축할 수 있었으며, XRF 분석을 통하여 각각 70 % 및 99 %의 농도로 분리할 수 있음을 확인하였다.

• Imaging Science in Dentistry
• /
• 제45권3호
• /
• pp.147-151
• /
• 2015

Purpose: The aim of this study was to investigate the effects of metal artifacts on the accurate diagnosis of root fractures using cone-beam computed tomography (CBCT) images with large and small/limited fields of view (FOVs). Materials and Methods: Forty extracted molar and premolar teeth were collected. Access canals were made in all teeth using a rotary system. In half of the teeth, fractures were created by the application of mild pressure with a hammer. The teeth were then randomly put into a wax rim on an acryl base designed in the shape of a mandible. CBCT scans were obtained using a Newtom 5G system with FOVs of $18cm{\times}16cm$ and $6cm{\times}6cm$. A metal pin was then placed into each tooth, and CBCT imaging was again performed using the same fields of view. All scans were evaluated by two oral and maxillofacial radiologists. The specificity, sensitivity, positive predictive value, negative predictive value, and likelihood ratios (positive and negative) were calculated. Result: The maximum levels of sensitivity and specificity (100% and 100%, respectively) were observed in small-volume CBCT scans of teeth without pins. The highest negative predictive value was found in the small-volume group without pins, whereas the positive predictive value was 100% in all groups except the large-volume group with pins. Conclusion: The specificity of CBCT decreased with the presence of a pin in the large-volume group, but not in the small-volume group.