• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1288-1295
• /
• 2015

In experiment 1, eighty crossbred steers ($239{\pm}15kg$) were used in a 229-d experiment to evaluate the effects of increasing levels of enzymatically hydrolyzed yeast (EHY) cell wall in diets on growth performance feedlot cattle during periods of elevated ambient temperature. Treatments consisted of steam-flaked corn-based diets supplemented to provide 0, 1, 2, or 3 g EHY/hd/d. There were no effects on growth performance during the initial 139-d period. However, from d 139 to harvest, when 24-h temperature humidity index averaged 80, EHY increased dry matter intake (DMI) (linear effect, p<0.01) and average daily gain (ADG) (linear effect, p = 0.01). There were no treatment effects (p>0.10) on carcass characteristics. In experiment 2, four Holstein steers ($292{\pm}5kg$) with cannulas in the rumen and proximal duodenum were used in a $4{\times}4$ Latin Square design experiment to evaluate treatments effects on characteristics of ruminal and total tract digestion in steers. There were no treatment effects (p>0.10) on ruminal pH, total volatile fatty acid, molar proportions of acetate, butyrate, or estimated methane production. Supplemental EHY decreased ruminal molar proportion of acetate (p = 0.08), increased molar proportion of propionate (p = 0.09), and decreased acetate:propionate molar ratio (p = 0.07) and estimated ruminal methane production (p = 0.09). It is concluded that supplemental EHY may enhance DMI and ADG of feedlot steers during periods of high ambient temperature. Supplemental EHY may also enhance ruminal fiber digestion and decrease ruminal acetate:propionate molar ratios in feedlot steers fed steam-flaked corn-based finishing diets.

• The Korean Journal of Pharmacology
• /
• v.30 no.2
• /
• pp.255-260
• /
• 1994

There are some reports about the influences of free fatty acids on the albumin binding of drugs. But they were concerned to the limited free fatty acids, mostly of azapropazone-warfarin bidning site bound drugs and determination of dissociation and association constants by stopped flow technique. These data were not enough to make conculsions for the general tendency of free fatty acid to albumin binding. Therefore the influence of various saturated fatty acids of $C_{10{\sim}20}$, oleic acid and linoleic acid as unsaturated fatty acids to albumin binding of warfarin and dansylsarcosine were studied by equilibrium dialysis. The concentration of free drug was determined by spectrophotometer according to the molar ratios of 0, 0.5, 1, 2 and 4 between free fatty acid and albumin. There were significant increasing in the free durg concentration of warfarin and dansylsarcosine when the molar ratio for capric acid, lauric acid and palmitic acid was 4. The free warfarin concentration was increased significantly at a molar ratio of 4 between oleic acid and albumin. Therefore the albumin binding of durgs can be variated significantly by increased free fatty acid of diabetics and cause to the pharmacokinetic variation between healthy and diabetics.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.23-27
• /
• 1997

To investigate the effect of L-arginine as stabilizing agent for omeprazole, the degradation rate constant of omeprazole in aqueous solution was determined at 30, 40 and $50^{\circ}C$ with various ratios of L-arginine to omeprazole. The pH of omeprazole solutions was also determined. As the amount of L-arginine increased, the pH of omeprazole solution also increased, and the solution appeared to be more stable. The omeprazole in aqueous solution could be stabilized by more than 15:1 molar ratio of L-arginine to omeprazole. The stability of omeprazole in commercial products using L-arginine or sodium phosphate dibasic as stabilizing agent was investigated. Among the commercial products, the omeprazole product prepared with L-arginine (molar ratio of L-arginine to omeprazole, 20:1) was most stable.

• Korean Journal of Agricultural Science
• /
• v.41 no.2
• /
• pp.141-147
• /
• 2014

Diacylglycerol-oil (DAG oil) and four kinds of fatty acids [C16:0, C18:0, perillar oil-hydrolyzate(C18:3, 59.7%) and docosahexaenoic acid(DHA, C22:6, 63.7%)] were enzymatically esterified with 1:0.5, 1:1 and 1:1.5 molar ratio (DAG oil: fatty acids) to produce structured DAG. The reaction mixture were catalyzed by addition of sn-1,3 specific Lipozyme RMIM with 10 wt% of total substrates, and reacted for 1, 3, 6 and 24 hr at $62^{\circ}C$ with 220 rpm on the shaking water bath. The produced DAG were analyzed by TLC. In the result, the proportion of each fatty acid [(C16:0, C18:0, perilla oil-hydrolysate(C18:3, 59.7%) and DHA(C22:6, 63.7%)] on DAG products were increased as molar ratios of substrate increased. Among them, DHA showed the least reaction rate in which 24.2 % of DHA was found in the structured DAG molecules after 24 hr reaction with 1:1.5 molar substrate amount ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.812-816
• /
• 2017

$Fe_3O_4$ was prepared on the $TiO_2-coated$ natural mica substrate. The natural mica has an average particle size of $22{\mu}m$. The substrate was coated on $TiO_2$ thin films using hydrothermal synthesis at pH 1.5-2.5 at $75^{\circ}C$. The Fe precursor solution was prepared by mixing $FeSO_4$ (for $Fe^{2+}$ ion) and $FeCl_3$ (for $Fe^{3+}$ ions) with different molar ratios such as 1/2, 1/1, 2/1, 3/0, and $Fe_3O_4$ only. X-ray diffraction analysis shows that the crystal structure depends on the $FeCl_3-to-FeSO_4$ molar ratio. $Fe_3O_4$ crystal phase could be obtained at higher $FeSO_4$ contents.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.123-128
• /
• 2010

The continuous transesterification of mixed fat was done on the plug flow reactor packed with the static mixers. The transesterification using 0.5 wt% KOH, 0.8 wt% TMAH and mixed catalyst[40 v/v% KOH(0.5 wt%)+60 v/v% TMAH(0.8 wt%)] was conducted with the changes of molar ratios, weight percentage of beef, flow rates and number of static mixer's elements at $65^{\circ}C$. The overall conversion of mixed fat at 1:8 molar ratio, 50 wt% of beef and 24 of static mixer's elements increased until 0.7mL/min of flow rate. The overall conversion of mixed fat showed 96% at those conditions. So, the optimum operating conditions on tublar reactor were 1:8 molar ratio, 50 wt% of beef, 0.7 mL/min of flow rate and 24 of static mixer' s elements.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.5
• /
• pp.353-364
• /
• 2022

The crystalline domain of thermosetting urea-formaldehyde (UF) resins at low formaldehyde-to-urea (F/U) molar ratios (≤ 1.0) is known to be responsible for their poor performance as wood adhesives. Crystallization has been observed in 1.0 F/U UF resins during the addition reaction stage and at the end of the synthesis process (neat UF resins). The crystallinity and X-ray diffraction (XRD) spectra of the uncured neat UF resins, on the other hand, differed significantly from those of the cured neat UF resins, raising the possibility that their crystal structures were also different. This study demonstrates for the first time that the crystalline domains in 1.0 F/U UF resins generated from uncured and cured samples are identical. Despite having a lower crystallinity value, the synchrotron XRD patterns of purified neat UF resins were equivalent to the XRD patterns of cured neat UF resins. Transmission electron microscope images of the cured UF resins showed that the crystals were lamellar structures. This finding suggests that the crystal at low molar ratio UF resins are isotropic polycrystals with random orientation.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.327-334
• /
• 2002

Transesterfication of vegetable oils and methanol with alkaline catalyst was carried out to produce biodiesel fuel by continuous process. The process consists of two static mixers, one tubular reactor and two coolers and gave $96{\sim}99$% of methyl ester yield from soybean oil and rapeseed oil. Experimental variables were the molar ratios of methanol to vegetable oil, alkaline catalyst contents, flow rates, mixer element number. The optimum ranges of operating variables were as follows; reaction temperature of $70^{\circ}C$, l:6 of molar ratio of methanol to oil, O.4%(w/w) sodium hydroxide based on oil, static mixer elements number of 24 and 4 min. residence time.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.173-176
• /
• 1998

Epitaxial Si layers were deposited on n- or p-type Si(100) substrates by hot-wall chemical vapor deposition (CVD) technique using the {{{{ {SiH }_{ 2} {Cl }_{2 } - {H }_{ 2} }}}}chemistry. Thermodynamic calculations if the Si-H-Cl system were carried out to predict the window of actual Si deposition procedd and to investigate the effects of process variables(i.e., the deposition temperature, the reactor pressure, and the source gas molar ratios) on the growth of epitaxial layers. The calculated optimum process conditions were applied to the actual growth runs, and the results were in good agreement with the calculation. The expermentally determined optimum process conditions were found to be the deposition temperature between 900 and 9$25^{\circ}C$, the reactor pressure between 2 and 5 Torr, and source gad molar ration({{{{ {H }_{2 }/ {SiH }_{ 2} {Cl }_{2 } }}}}) between 30 and 70, achieving high-quality epitaxial layers.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1248-1256
• /
• 2020

In this study, the polyurethane resin was synthesized by applying PTMG and DMBA of different composition ratios for the synthesis of water-dispersible polyurethane used in wound coating resin. The varying properties of the synthesized water-dispersible polyurethane were measured through tensile strength, elongation, and abrasion resistance analysis. As for the tensile strength measurement result according to the PTMG content, the sample with the highest reaction molar ratio was measured as 1.08 kgf/mm2 and the elongation was measured as 520%. As for the tensile strength result according to the DMBA content, the sample with the highest reaction molar ratio was measured as 0.51 kgf/mm2, and the elongation was measured as 435%. The degree of surface destruction by the abrasion resistance measurement was visually confirmed through SEM.