• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.193-193
• /
• 2011

To obtain ceramic films, the sol-gel coating technique has been broadly used with heat treatment, but crack formation tend to occur during heat treatment in thick sol-gel films. We prepared PZT thin films by sol-gel method with single-step spin coating process. The PZT solution have been synthesized using lead acetate ($Pb(CH_3COO)_2$), zirconium acetylacetonate ($Zr(OC_3H_7^n)_4$), and titanium diisopropoxide bis(acetylacetonate) 75wt% in isopropanol ($Ti(OC_3H_7^i)_2(OC_3H_7^n)_2$) as starting materials and n-propanol was selected as a solvent. The poly(vynilpyrrolidone) (PVP) was added with 0, 0.25, 0.5, 0.75, and 1 molar ratios to control viscosity of solution. We investigated influence of the viscosity on thickness, microstructure, and electrical properties of final PZT films. Thermo-gravimetric analysis and differential scanning calorimeter (TGA/DSC) was carried out from room temperature to $800^{\circ}C$ in order to measure pyrolysis temperature. Structural characteristics were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Ferroelectric and dielectric properties were measured by RT66A (Radiant) and impedance analyzer (Agilent), respectively. The thicknesses of PZT films depended on incorporation of an excess amount of PVP. Finally, we obtained PZT films of good quality without crack formation via single-step spin coating.

• Journal of Periodontal and Implant Science
• /
• v.50 no.3
• /
• pp.197-206
• /
• 2020

Purpose: The aim of this study was to determine the impact of different compressive forces on deproteinized bovine bone mineral (DBBM) particles covered by native bilayer collagen membrane (NBCM) during alveolar ridge preservation (ARP) in the molar area, and to identify any histomorphometric and clinical differences according to the compressive force applied. Methods: Sockets were filled with DBBM after tooth extraction, and different compressive forces (30 N and 5 N, respectively) were applied to the graft material in the test (30 N) and control (5 N) groups. The DBBM in both groups was covered with NBCM in a double-layered fashion. A crossed horizontal mattress suture (hidden X) was then made. A core biopsy was performed using a trephine bur without flap elevation at the implant placement site for histomorphometric evaluations after 4 months. The change of the marginal bone level was measured using radiography. Results: Twelve patients completed the study. The histomorphometric analysis demonstrated that the mean ratios of the areas of new bone, residual graft material, and soft tissue and the implant stability quotient did not differ significantly between the groups (P>0.05). However, the mean size of the residual graft material showed a significant intergroup difference (P<0.05). Conclusions: The application of 2 compressive forces (5 N, 30 N) on particulate DBBM grafts during open-healing ARP in the posterior area led to comparable new bone formation, implant feasibility and peri-implant bone level.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.47-51
• /
• 2010

A powder, containing 80 percent of blue cobalt aluminate $(CoAl_2O_4)$ crystallites, was synthesized at $210 ^{\circ}C$ using a (metal nitrate-malonic acid-ammonium hydroxide-ammonium nitrate) system. The optimal amount of concentrated ammonia water and initial decomposition temperature were determined for the blue $CoAl_2O_4$ crystallites preparation. Three $CoAl_2O_4$ precursor pastes, corresponding to the various amounts of concentrated ammonia water, were prepared by evaporating the initial solutions in an electric furnace fixed at $80 ^{\circ}C$ under a vacuum of 25 torr. The initial solution was used to dissolve the starting materials. The powder with the maximum content (80%) of blue $CoAl_2O_4$ crystallites was prepared when the prepared precursor was decomposed at $210 ^{\circ}C$. The blue $CoAl_2O_4$ crystallite content in the prepared sample decreased with increasing initial decomposition temperature. For 0.2 mole of the $Al^{3+}$ ion, the chemical compositions of the precursor corresponded to molar ratios of 0.4, 1.40, 2.56 and 2.00 for the $Co^{2+}$ ion, malonic acid, ammonia and ammonium nitrate per mole of the $Al^{3+}$ ion, respectively. The blue $CoAl_2O_4$ crystallite content in the sample decreased with the amount of ammonia deviated from the optimal value. The characteristics of the powders were examined using X-ray diffraction, optical microscopy, Fourier transformation infrared spectroscopy and the Brunauer-Emmett-Teller technique.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.287-293
• /
• 1983

Free radical-initiated copolymerizations of diethyl ${\alpha}$-phenylvinyl phospbate (DEPVP) with acrylonitrile (AN) and maleic anhydride (MAnh) were studied. The monomer reactivity ratios for AN/DEPVP pair, determined at $70^{\circ}C$ in bulk using benzoyl peroxide as an initiator, were;$ r_1(AN) = 0.77, r_2(DEPVP) = 0.002$. The values of the Alfrey-Price constants, Q and e, for DEPVP were calculated to be 0.012 and -1.35, respectively. Free radical-initiated copolymerization of MAnh/DEPVP pair in chloroform at $70^{\circ}C$ produced 1 : 1 alternating copolymers regardless monomer feed composition with the highest copolymerization rate at the molar ratio of MAnh : DEPVP = 7 : 3. The equilibrium constant of a charge-transfer complex between DEPVP and MAnh in deutrated chloroform, determinated at room temperature by transformed Benesi-Hildebrand NMR method, was 0.085 l/mol. The reduced viscosity of copolymers of AN/DEPVP pair decreased as the content of DEPVP units increased, while that of MAnh/DEPVP pair remained more or less constant.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.7
• /
• pp.1364-1368
• /
• 2008

The activity of the catalytic system composed of Fe$(acetylacetonate)_3$ (Fe$(acac)_3$), triphenylphosphine, and diethylaluminum chloride for the dimerization of bicyclo[2.2.1]hepta-2,5-diene (2,5-norbornadiene, NBD) to produce hexacyclic endo-endo dimer (hexacyclo[$7.2.1.0^{2,8}.1^{3,7}.1^{5,13}.0^{4,6}$]tetradec-10-ene, Hnn) was significantly enhanced by the presence of $AlCl_3$, especially at the molar ratios of NBD/Fe$(acac)_3$ of 500. XPS analysis of the catalytic systems clearly demonstrates that $AlCl_3$ facilitates the reduction of Fe$(acac)_3$ to form active species, Fe(II) and Fe(0) species. The layer separation was observed when [BMIm]Cl was used along with $AlCl_3$, but catalyst recycle was not very successful.

• Macromolecular Research
• /
• v.16 no.1
• /
• pp.57-61
• /
• 2008

Chitosan is normally acylated and subsequently conjugated with drugs for biomedical applications. This study examined the relationship between the succinylation and gelation behaviors of glycol chitosan. Glycol chitosan was acylated with succinic anhydride under a wide variety of reaction conditions, such as different molar ratios of succinic anhydride to glucosamine, different methanol content in the reaction media, and different reaction temperatures. Among these reaction parameters, the methanol content in the solvent played an important role in determining the regioseletive succinylating site. N-succinylation and N-N cross-linking occurred regardless of the reaction conditions. However, O-succinylation was observed under specific conditions, i.e. a methanol content> 0.6 (v/v) and a reaction temperature> $25^{\circ}C$. O-succinylation accelerated the N-O cross-linking of glycol chitosan, and led to gelation. The N-succinylated glycol chitosans were water-soluble, whereas the N-and O-succinylated glycol chitosans fonned a gel. These physico-chemical structural differences in the succinylated glycol chitosans would definitely influence subsequent drug-conjugation reactions and consequently the drug loading and release kinetics.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.2
• /
• pp.254-269
• /
• 2004

Polysilicato-iron coagulant (PSI) is receiving attention in Japan as a substitute for aluminum-based coagulants. In the first part of this article, coagulation, sedimentation and filtration experiments were carried out using kaolin clay particles as the turbidizing material and four types of PSI with various molar ratios of polysilicic acid to ferric chloride (Si/Fe ratio). Results demonstrate that use of a PSI with a high Si/Fe ratio can cause a more dramatic decrease in treated water turbidity but a higher suction time ratio (STR) than when PACl is used. However, optimization by increasing the rapid agitation strength GR is found to greatly improve the STR. In addition, the series of filtration experiments verified that optimization of GR is greatly effective in controlling rapid increases in filter head loss, and also formation of a thin aging layer in the upper part of the filter bed by slow-start filtration is effective in improving filtered water turbidity over the entire filtration process. The second part of this article describes two innovative filtration techniques to increase the particle separation efficiency; (1) coagulant-coated filter medium by enhancing the electrical potential of the surface of the filter medium, and (2) coagulant dosing in influent by controlling the electrical potential of particles entering the filter layer. From the results of the various filtration experiments using a pilot plant, these two techniques were found to be very effective to reduce the effluent water turbidity from the start to the end of a filter run. Moreover, in the filtration experiments using these two methods simultaneously, higher removal efficiency of approximately 3-log (99.7%) was realized, resulting that the finished water turbidity was accordingly reduced to 0.004mg/L.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.193-199
• /
• 2016

MR(magnetorheological) devices for vehicle applications requires the consistent control performance and the reliable operation. However, the corrosion of iron particles consisting the MR fluid can significantly affect on MR properties. This paper presents an effect of the MR particle corrosion on the performance of MR fluids such as shear stress magnitude which is directly concerned with control performance. As a first step, MR particles are corroded by water-calcium chloride solution. The resulting MR particles are examined by scanning electron microscope (SEM) and their molar ratios are analyzed by the energy dispersive X-ray analysis (EDAX). By dispersing the corroded MR particles into silicone oil, the corroded MR fluid is synthesized for evaluation of MR effect change. A rotational viscometer is adopted to measure shear stress magnitude. Finally, it is demonstrated how much the corrosion affect on performances by comparing the normal MR fluid to the corroded MR fluid, from which performance investigation of the MR devices containing the corroded MR particles will be studied in the second phase of this study.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.114-118
• /
• 2013

Separation/recovery of valuable metals such as nickel or tin from copper based alloys has recently attracted from the viewpoints of environmental protection and resource recycling. In this report, preliminary study on concentration and separation of nickel from copper based alloy dross using selective adsorption by chelate resin was performed. The chelate resin used in this study has absorbed copper ions more easily than nickel ions in the metal solution, which could allow the concentration/separation of the nickel from the copper base alloy solution. The final molar ratios of Ni and Cu ions in the two concentrated solutions were 70 and 99 % respectively after three-time flowing the solution through the chelate resin column.

• Imaging Science in Dentistry
• /
• v.45 no.3
• /
• pp.147-151
• /
• 2015

Purpose: The aim of this study was to investigate the effects of metal artifacts on the accurate diagnosis of root fractures using cone-beam computed tomography (CBCT) images with large and small/limited fields of view (FOVs). Materials and Methods: Forty extracted molar and premolar teeth were collected. Access canals were made in all teeth using a rotary system. In half of the teeth, fractures were created by the application of mild pressure with a hammer. The teeth were then randomly put into a wax rim on an acryl base designed in the shape of a mandible. CBCT scans were obtained using a Newtom 5G system with FOVs of $18cm{\times}16cm$ and $6cm{\times}6cm$. A metal pin was then placed into each tooth, and CBCT imaging was again performed using the same fields of view. All scans were evaluated by two oral and maxillofacial radiologists. The specificity, sensitivity, positive predictive value, negative predictive value, and likelihood ratios (positive and negative) were calculated. Result: The maximum levels of sensitivity and specificity (100% and 100%, respectively) were observed in small-volume CBCT scans of teeth without pins. The highest negative predictive value was found in the small-volume group without pins, whereas the positive predictive value was 100% in all groups except the large-volume group with pins. Conclusion: The specificity of CBCT decreased with the presence of a pin in the large-volume group, but not in the small-volume group.