• 한국토양비료학회지
• /
• 제30권4호
• /
• pp.314-327
• /
• 1997

점적 관개시 근권에서의 토양 수분 이동 현상을 2차원 원통 좌표를 이용하여 모델링 하였다. 엽면 증산, 다양한 형태의 지면 증발, 관개율의 증가로 인한 지면에서의 물 고임 현상등을 고려하였다. 모델은 유한 차분법을 이용한 수치해로 풀었다. 여러가지 비교의 결과로부터 본 연구에서 개발된 모델은 근권에서의 토양 수분 이동 현상을 잘 묘사한다고 볼 수 있었다. 모델의 민감도 분석을 통해서 몇가지 유익한 사실을 발견하였다. 토양 수분이 연직 방향으로 이동하는 속도가 더 큰 것으로 보아 자동 관개용 토양 수분 측정 센서를 설치할 경우, 관개점의 연직하방이 좋은 측점임을 알 수 있었다. 습윤대의 형태가 단지(pot) 모양으로 되는 것은 지면 증발로 인한것임을 알 수 있었다. 또한, 토양의 포화 수리 전도도가 습윤대의 확산에 큰 영향을 주는 것을 알 수 있었고, 관개 중단 후에도 연직 방향의 확산은 계속됨을 알 수 있었다.

• Food Science and Biotechnology
• /
• 제15권1호
• /
• pp.133-137
• /
• 2006

Wheat gluten-chitosan composite film (WGCCF) can prevent moisture migration and enhance the antimicrobial properties of gluten in intermediate-moisture foods like sandwiches. To mimic the structure of actual sandwich-type products we developed multi-layer food models, where moisture content and water activity differ. Water activity gradients direct moisture migration and therefore determine product characteristics and product stability. A 10% wheat gluten film-forming solution was mixed with chitosan film-forming solution (0-3%, w/w) and evaporated to generate WGCCF. Addition of 3% chitosan enhanced the mechanical properties of the film composite, lowered its water vapor permeability, and improved its ability to protect against both, Streptococcus faecalis and Escherichia coli, in a 24 hr sandwich test (reduction of 1.3 and 2.7 log cycles, respectively, compared to controls). Best barrier and antimicrobial performance was found for 3% chitosan WGCCF at pH 5.1. Film of this type may find application as barrier film for intermediate-moisture foods.

• Computers and Concrete
• /
• 제1권1호
• /
• pp.31-46
• /
• 2004

A methodology is presented for computing stresses in structural concrete members exposed to fire. Coupled heat and moisture migration simulations are used to establish temperature, pore pressure, and liquid-saturation state variables within near-surface zones of heated concrete members. Particular attention is placed on the use of coupled heat and multiphase fluid flow simulations to study phenomena such as moisture-clogging. Once the state variables are determined, a procedure for combining the effects of thermal dilation, mechanical loads, pore pressure, and boundary conditions is proposed and demonstrated. Combined stresses are computed for varying displacement boundary conditions using data obtained from coupled heat and moisture flow simulations. These stresses are then compared to stresses computed from thermal analyses in which moisture effects are omitted. The results demonstrate that moisture migration has a significant influence on the development of thermal stresses.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.246-247
• /
• 2017

In this study, it reviewed the effect of moisture migration in concrete with heating rate on concrete spalling. Concrete specimens with compressive strength 30MPa and 110MPa are used and its size is □100×100×h200mm. And, two kinds of heating rate are set such as IS0 834 and 1℃/min. As a result, in the concrete specimen exposed to ISO 834 standard heating condition, moisture could migrate through pore network and surface concrete pieces fall out by generating moisture clog near the surface in 110MPa concrete specimen. Meanwhile, In the case of concrete specimens exposed to 1℃/min. heating condition, it is appeared that moisture could not migrate because temperature is distributed uniformly. Therefore, surface spalling is not occurred with low heating rate. However, in the case of 110MPa concrete specimen is exploded even though it heated by low heating rate.

• Geomechanics and Engineering
• /
• 제25권4호
• /
• pp.295-302
• /
• 2021

Cross-borehole electrical resistivity tomography (ERT) is an effective groundwater detection tool in geophysical investigations. In this paper, an artificial water injection test was conducted on a small clay sample, where the high-resolution cross-borehole ERT was used to investigate the moisture migration law over time. The moisture migration path can be two-dimensionally imaged based on the relationship between resistivity and saturation. The hydraulic conductivity was estimated, and the magnitude ranged from 10^-11 m/s to 10^-9 m/s according to the comparison between the simulation flow and the saturation distribution inferred from ERT. The results indicate that cross-borehole ERT could help determine the resistivity distribution of small size clay samples. Finally, the cross-borehole ERT technique has been applied to investigate the self-sealing characteristics of clay.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.5-13
• /
• 2016

This study investigated the effects of different factors on the migration of a fluorescent whitening agent (FWA) from paper treated with FWAs to non-fluorescent papers. FWA migration experiments were carried out in vertical and friction contacts between the papers dyed with FWAs and non-fluorescent papers. During the experiments, we identified the effects of the addition and types of FWAs, contact time, temperature, and relative humidity (RH) on FWA migration. The fluorescence indices of the non-fluorescent papers were measured before and after the migration experiments, and the Student's t test, a statistical tool, was utilized to compare results from different migration experiments. In vertical contact experiments, FWA migration to non-fluorescent paper was observed at $30^{\circ}C$ and 70% RH; this was attributed to the high moisture content of the paper. FWA migration did not occur significantly at $23^{\circ}C$ and 50% RH. In the friction contact experiments, FWA migrations were identified at both temperature conditions and RH percentages. The addition and types of FWAs did not increase the fluorescence index of non-fluorescent papers. Therefore, it was concluded that the moisture content of paper and the friction contact affected FWA migration from the papers containing internal and surface FWAs.

• 한국연초학회지
• /
• 제29권2호
• /
• pp.98-103
• /
• 2007

This study compares menthol migration from fillers to filters and mainstream smoke in a type of leaf tobacco and according to the moisture content differences at the range of $11{\sim}15\;%$. The leaf tobacco used in this study consisted of Korea flue cured upper leaves B1O (KFUB1), A40R (KFUA4), lower leaves C1L (KFLC1), CD4L (KFLCD4), burley upper leaves A3T (KBUA3), lower leaves D3W (KBLD3), Orient Basma I/III (OB), Orient Izmir BIG (OI), expanded tobacco (KET), and reconstituted sheet (KRC). Menthol migration to the filter and mainstream was measured under constant conditions for 80 days with intervals of 20 days. In the comparison between flue cured types, there were significant differences in the filter parts, as follows. KFUB1(34.4 %) KFUA4(37.4 %), KFLC1(43 %) and KFLCD4 were 55.7 %. In the comparision between other types of leaf tobaccos, KFUB1 was 34.4 % and KET was 52.6 % at filter parts. In the methol transfer to mainstream smoke was $16.5{\sim}24.2\;%$. The menthol migration to filters was measured based on the moisture content of $11{\sim}15\;%$ for the KFUB1 after storing it for 80 days. The menthol migrations were $36{\sim}40\;%$ at the moisture content of $11{\sim}15\;%$, respectively. The transfers to mainstream smoke were $12.8{\sim}15.8\;%$.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1997년도 총회 및 춘계 학술발표회 논문집
• /
• pp.47-52
• /
• 1997

The experimental investigations considered in this paper are similar in many respects to those of Lee$^1$, with some key differences. First, there is no layering of the soils in a heterogeneous liner. The only soil investigated is the clay component of the cover liner. This ensures that the clay is exposed to freezing and that frost propagation in the clay can be investigated separate from other processes. Second, a closed system approach to the simulation was adopted. According to Jones$^2$, closed-system freezing occurs when there is no source of water available beyond that originally present in the soil voids. Freezing under such conditions results in very thin or non-existent ice lenses. One of tile objectives of the experiments described in this paper was the moisture migration and the changing of moisture contents of the compacted clay liner in landfill. The closed-system was used to limit tile variables in the experimental simulation to make these calculations more direct, although the final results could be applied to an open system also. As a result, the moisture content decreased about 45%-46% after two freeze/thaw cycles.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1530-1535
• /
• 2009

Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. The equilibrium properties of moisture are described by means of water vapor sorption isotherms, which illustrate the hysteretical behavior of materials. In this paper, the prediction method of the moisture distribution inside the high strength concrete members under the high temperature is presented. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member. And the moisture diffusivity model of high strength concrete by high temperature is proposed. To demonstrate the validity of this numerical procedure, the prediction by the proposed algorithm is compared with the test result of other researcher. The proposed algorithm shows a good agreement with the experimental results including the vaporization effect inside the concrete.

• 한국식품과학회지
• /
• 제31권1호
• /
• pp.164-170
• /
• 1999

저장 중 쌀의 수분이동에 따른 균열현상을 구명하고 균열을 발생시키는 임계조건을 산출하여 이를 토대로 쌀의 균열을 방지할 수 있는 저장조건을 확립하였다. 쌀의 평형상대습도와 노출된 환경의 상대습도의 차이$({\Delta}ERH)$가 적을 때는 균열이 발생하지 않은 반면, 그 차이가 임계치보다 클 때는 균열이 발생하였으며 균열의 발생정도는 쌀의 평형상대습도와 환경의 상대습도의 차이가 클수록 심하게 나타났다. 탈습환경 하에서는 불규칙한 형상의 균열이 쌀알의 외부에 발생하였으며 흡습환경 하에는 규칙적인 형상의 균열이 쌀알의 내부에 축방향과 수직방향으로 방사상으로 발생하였다. 노출시간별 균열발생 패턴을 Weibull함수에 의거하여 해석한 결과, ${\Delta}ERH$가 클수록 균열속도상수가 증가하였다. 동할미 발생률은 In$({\Delta}ERH)$에 따라 직선적으로 증가하였으며, 임계 균열발생 상대 습도차(critical crack-inducing ${\Delta}ERH$)는 탈습시 $11.3{\sim}16.4%$, 흡습시 $10.8{\sim}17.1%$의 값을 보였다. 실험결과를 토대로 수분함량 및 수분활성도 별 쌀의 안전저장 상대습도를 나타내는 diagram을 제시하였다.