• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.434-440
• /
• 2012

A placebo-controlled double-blind ingestion study of a beauty supplement containing rice-derived ceramide was performed. Thirty three subjects who always tended to have rough skin due to dryness participated in the study. Dermatological diagnosis by physicians showed that the supplement significantly improved dryness and itching of the skin. On measurement of water content in the skin, the supplement was shown to significantly increase water content in the skin. On microscopic three-dimensional analysis of the epidermis, the supplement was shown to improve smoothness, exfoliation, and short-term ingestion of the supplement containing rice derived ceramide, which is very effective as skin beautifying food.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2018

In this study, the Controlled Low Strength Material (CLSM) was investigated to utilize the bottom ash and fly ash generated in the Circulating Fluidized Bed Combustor (CFBC). It was confirmed that the CFBC fly ash (CFBC-F) and CFBC bottom ash (CFBC-B) had an irregular particle shape through SEM measurement. According to the results of the hazard analysis, it was also confirmed that they were environmentally safe. In the case of mixing with CFBC-F, the unit quantity was increased. Regarding the rate of change of length, shrinkage in the range of -0.05~0.50% occurred in the air dry curing condition and expansion in the range of 0.1~0.6% in the sealed curing condition. Compressive strength was increased in the sealed curing condition compared to the air dry curing condition because there was enough moisture for hydration reaction in the long term. Therefore, the results of this study are likely be used as basic research data of mine filler materials.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.305-319
• /
• 2012

The Myeongdongseongdang Cathedral, which was designated as Historic Site No. 258 in Korea, is a representative cathedral of Korean Catholic church designed by a French priest Eugene-Jean Georges Coste and completed in 1898. It is a Gothic-styled architecture constructed with bricks and stones. Lithological and mineralogical analyses determined that holy stone relics were made of marble and granite, and foundation stones are of pink feldspar granite. Deterioration mapping and ultrasonic measurement revealed main weathering and damage were exfoliation (40%) and black discoloration (37%) in the holy water basin, and exfoliation (6%) and discoloration (46%) in the exterior foundation stones. Ultrasonic velocity of the stones were calculated as 3,525m/s in the holy water basin and 2,795m/s in the exterior stones that indicated these stones were sorted into moderately to highly weathered rock. This was resulted from moisture and atmospheric pollutants around the cathedral.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.70-84
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus densiflora was one of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMC's and sorption isotherms at various heating conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter- and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and nondestructive testing wood.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.124-130
• /
• 2007

Lettuce (Lactuca Sativa L.) is the most popular salad vegetable crop The purpose of this study was to analyze the quality of lettuce, and residual pesticides in this vegetable, during growth after transplanting. The eatable weight was 40% of the total weight at the commencement of transplanting, but had doubted at harvest after transplanting. As lettuce grew after transplanting, the pH, the sugar level, and the moisture content increased slightly, and the color tended towards yellow rather than greenThe SPDA chlorophyll measurement was 16.84 at 42 day post-ransplantation, and increased to 26.44 at 67 day after transplanting. The contents of vitamin C were 2.5mg/100g wet weight at 60 d after transplantation, but decreased to 2.2mg/100g wet weight 67 day post-transplantation. Mineral (Ca, Fe, K, Mg, and Na) levels rose after transplantation, and attained their highest levels 60 day post-transplantation. The lettuce crop was analyzed for residues of each of 48 pesticides nt 54 after transplantation, and the only such chemical detected was chlorthalonil(0.03 0.25mg/kg wet weight).

• Clean Technology
• /
• v.25 no.1
• /
• pp.74-80
• /
• 2019

Thermochemical treatment of sewage sludge is an energy-intensive process due to its high moisture content. To save the energy consumed during the process, the hydrothermal carbonization process for sewage sludge can be used to convert sewage sludge into clean solid fuel without pre-drying. This study is aimed to investigate co-firing characteristics of the hydrothermally carbonated sewage sludge (HCS) to a pulverized coal combustion system. The purpose of the measurement is to measure the pollutants produced during co-firing and combustion efficiency. The combustion system used in this study is a furnace with a down-firing swirl burner of a $80kW_{th}$ thermal input. Two sub-bituminous coals were used as a main fuel, and co-firing ratio of the sewage sludge was varied from 0% to 10% in a thermal basis. Experimental results show that $NO_x$ is 400 ~ 600 ppm, $SO_x$ is 600 ~ 700 ppm, and CO is less than 100 ppm. Experimental results show that stable combustion was achieved for high co-firing ratio of the HCS. Emission of $NO_x$ and $SO_x$ was decreased for higher co-firing ratio in spite of the higher nitrogen contents in the HCS. In addition, it was found that the pollutant emission is affected significantly by composition of the main fuel, regardless of the co-firing ratios.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.1
• /
• pp.95-103
• /
• 2019

Lips have a defect in maintenance of moisture due to their thin layer. As aging progresses, lips lose volume and redness, and become wrinkled. Fat grafting and filler surgery have been used to achieve attractive lips, but little research has been reported to develop better materials to replace the present methods. Recently, a study suggests that the increase of adipocyte number can be enhancing the expansion endogenous fat. In previous study, we identified that the efficacy of Magnolia officinalis bark extract (MOBE) was effective on the induction of adipogenic differentiation. In this study, we confirmed that MOBE enhanced the differentiation of human adipose-derived stem cells on the fat mimic 3D structure built by 3D bioprinting method From further experiments in human, we established a method to quantify the severity of lip wrinkle by measurement of standard deviation of gray value using Image J software. Finally, we found that topical treatment with 1% MOBE formulated lip balm significantly improved the lip wrinkle after using for 12 weeks. In conclusion, these findings suggest that MOBE has great potential, as a cosmetic ingredient, to reduce the lip wrinkle through the effect of promoting adipogenic differentiation.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.120-126
• /
• 2019

In this study, the quality characteristics and antioxidant activities of wet noodles added with seunggumcho (Angelica gigas N Leaf) powder at concentrations of 1, 2, 3, and 4%, respectively, were investigated. The moisture contents and pH of the samples showed a tendency to decrease with increasing amounts of seunggumcho powder. Texture measurement indicated that 'hardness,' 'springiness,' and 'chewiness' of the cooked noodle were the highest in the control group, and these parameters showed a tendency to decrease with increasing amounts of seunggumcho powder. The total polyphenol contents in wet noodles added with seunggumcho powder increased with increasing amounts of seunggumcho powder. 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity was the lowest in the control group (10.85%) and highest in the 4% addition group (44.84%). ${\alpha}-Glucosidase$ inhibitory activity showed the lowest value in control group (1.17%), and increased with increasing amounts of seunggumcho powder. The sensory preference score was the highest for color, flavor, taste, and chewiness in the 2% addition sample. The findings of this study suggest the feasibility of seunggumcho added wet noodles as a health food with physiological benefits and provide evidence for introducing various health foods by adding seunggumcho.

• Food Engineering Progress
• /
• v.22 no.4
• /
• pp.381-385
• /
• 2018

Various rheological methods to measure the hardness of instant cooked rice by a texture analyzer were investigated and compared. Specifically, instant white rice samples with a wide range of hardness were subjected to four different rheological tests with disk, cylinder, rod, and cone probe whose results were inter-correlated. All the measurements demonstrated that the hardness of instant rice was reduced with increasing moisture content and showed negatively linear relationships. Out of the four tests applied in this study, the highest coefficient of correlation ($R^2=0.9268$) was observed distinctly in the cone probe test, where both compressive and shear forces can be applied to deform individual rice grains. However, the cylinder probe test had the lowest coefficient of correlation ($R^2=0.7247$) because it may be ineffective in causing direct deformation of individual rice grains. Furthermore, when the hardness values (N) were converted to stress (Pa), highly linear correlations ($R^2{\approx}0.99$) were observed between the tests with similar probe geometry and force application.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.9
• /
• pp.57-66
• /
• 2009

In the preliminary investigation (Park et al., 2009), the use of compressional wave velocity and its measurement techniques were proposed as a new quality control measure for trackbed fills. The methodology follows exactly the same procedure as the density control, except the density being replaced by the compressional wave velocity involving consistently with resilient modulus of design stage. The specifications for the control also include field compaction water content of optimum moisture content ${\pm}2%$ as well as the compressional wave velocity. In this sequel paper, crosshole and resonant column tests were performed as well direct-arrival method and laboratory compressional wave measurements to verify the practical applicability of a methodology far the new quality control procedure based upon compressional wave velocity. The stress-modified crosshole results reasonably well agree with the direct-arrival values, and the resonant column test results also agree well with the field crosshole results. The compressional wave velocity turned out to be an excellent control measure for trackbed fills both in the theoretical and practical point of view.