• Journal of Ginseng Research
• /
• v.6 no.2
• /
• pp.168-203
• /
• 1982

Effects of soil moisture on growth of Panax ginseng, of various factors on soil moisture, and of moisture on nutrition, quality, physiological disorder, diseases and insect damage were reviewed. Optimum soil moisture was 32% of field capacity with sand during seed dehiscence, and 55-65% for plant growth in the fields. Optimum soil moisture content for growth was higher for aerial part than for root and higher for width than for length. Soil factors for high yield in ginseng fields appeared to be organic matter, silt, clay, agreggation, and porosity that contributed more to water holding capacity than rain fall did, and to drainage. Most practices for field preparation aimed to control soil moisture rather than nutrients and pathogens. Light intensity was a primary factor affecting soil moisture content through evaporation. Straw mulching was best for the increase of soil moisture especially in rear side of bed. Translocation to aerial part was inhibited by water stress in order of Mg, p, Ca, N an Mn while accelerated in order of Fe, Zn and K. Most physiological disorders(leaf yellowing, early leaf fall, papery leaf spot, root reddening, root scab, root cracking, root dormancy) and quality factors were mainly related to water stress. Most critical diseases were due to stress, excess and variation of soil water, and heavy rain fall. The role of water should be studied in multidiciplinary, especially in physiology and pathology.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.143-148
• /
• 1994

The relationships between microbial activity and physico-KDICical characteristics of soils were investigated in three golf courses of Kwanak, Gold and Korea Country Clubs, with different open years. The soil samples were collected in tee, fairway and rough. There were ranges of 4.80-5.55 in pH, $25.55-98.50{\mu}S$ / cm in conductivity, 10.96-16.73% in moisture content, 0.18-0.36g / g in water holding capacity, 3.68-5.39% in organic matter, and 0.10-0.25% in total nitrogen. Dehydrogenase activity(DHA) as an index of soil microbial activity was determined. DHA values of soil were $69.83-314.43{\mu}$g / g in three courses and showed the order of Kwanak>Gold>Korea Country Club with open year. This indicates that DHA was affected by several fertilizer treatments rather than herbicide and pesticide treatments. DHA was significantly different with golf clubs as well as golf courses and positively correlated with water holding capacity and total nitrogen.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.283-288
• /
• 1998

The changes of the rheological properties of redbean jam were investigated during storage. The relationship between moisture content (40, 45 and 50%) and agar concentration (1, 0.1 and 0.2%) were studied for 5 days of storage. Water holding capacity was measured by placing redbean jam on Toyo Filter paper(No. 5A) and moisture movement was measured by placing redbean jam in bread. Sensory characteristics were examined in terms of color, flavour, preference, bitterness and taste. The results were as follows. Water holding capacity of redbean jam was increased as the solid content of sugar and agar concentration increased. Moisture movement was decreased as the solid content of sugar and agar concentration increased. Color, flavour, preference and taste were increased for the first day but decreased from the second day. There was significant difference(P<0.01). Bitterness did not show significant difference. 45% of moisture content, 0.1% of agar concentration and the first day showed the highest preference.

• Korean journal of food and cookery science
• /
• v.32 no.2
• /
• pp.157-167
• /
• 2016

Purpose: The objective of this study was to investigate the quality characteristics of pork and beef meat according to species (pork: modern genotype pork, Korean native black pork; beef: Holstein, Korean native cattle) and cuts (pork: shoulder, ham, loin; beef: loin, tenderness, round). Methods: The moisture content, protein content, fat content, ash content, fatty acid compositions pH, whater holding capacity, cooking loss, shear force, color, and sensory characteristics were measured in triplicate. Results: The moisture content, pH, cooking loss, and shear force of modern genotype pork were significantly higher than the Korean native black pork; in addition, the moisture content of loin was significantly higher than shoulder and ham. The fatty acid compositions for different parts of pork showed no significant differences. Among the sensory characteristics, the parameters of pork were not significantly different. The moisture content of Holstein was significantly higher than Korean native cattle. The fatty acid composition of beef could not confirm the specific differences. Water holding capacity of Korean native cattle was higher than Holstein, while cooking loss of Korean native cattle was lower than Holstein. Overall acceptability scores of Korean native cattle was higher than Holstein. Conclusion: The study results of several parameters in selected raw meat samples provide useful information for developing new strategies to improve the quality of meat products consumption.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.1
• /
• pp.115-126
• /
• 2001

In this paper, through a series of comparative experiments, effects of two different cure processing methods, cocure and precure, on the mechanical properties of honeycomb core materials for aircraft applications are considered. Mass of moisture accumulated into the closed cells of the sandwich panel specimen from the measured mass of moisture diffused to the full saturation state into the elements(skin, adhesive layer, Nomex honeycomb), consisting the honeycomb sandwich specimen has been calculated. Water reservoir of 70$\^{C}$ was used to have specimens absorb moisture to see the influence of moisture absorbed into sandwich panel on its mechanical properties. For the repair condition holding for 2 hours at 177$\^{C}$(350℉) temperature, a pressure due to the vapor expansion in each cell of the sandwich panel, which may result in the local separation of the interface between laminated skin and the surface of the honeycomb, has been estimated by vapor pressure-temperature relation from the thermodynamic steam table and compared to the pressure from the ideal gas state equation. The bonding strengths of the laminated skins on the flat surface of the Nomex honeycomb have been compared by the flatwise tension test and climbing drum peel test performed at room temperature for dry, wet and wet-repair specimens, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.784-788
• /
• 1999

The effects of pH, moisture content, and the relative amount of a polymer sample on the biodegradation of degradable polymers in soil were studied using various polymer materials such as cellulose, poly-(butylene succinate-co-adipate) (SG) polycaprolactone (PCL), a blend of PCL and starch (PCL-starch), and a poly-lactic acid (PLA). As with other materials, the polymers degraded faster at a neutral pH than at either acidic or basic conditions. Moisture contents of 60 and 100% water holding capacity exhibited a similar biodegradability for various polymers, although the effects differed depending on the polymer. For synthetic polymers, biodegradation was faster at 60%, while the natural polymer (cellulose) degraded faster at 100%. Fungal hypae was observed at a 60% water holding capacity which may have affected the biodegradation of the polymers. A polymer amount of 0.25% to soil revealed the highest biodegradability among the ratios of 0.25, 0.5, and 1%. With a higher sample amount, the residual polymer could be recovered after the biodegradation test. It was confirmed that a test for general biodegradation condition can be applied to plastic biodegradation in soil.

• Korean Journal of Poultry Science
• /
• v.21 no.4
• /
• pp.277-284
• /
• 1994

The functional properties of mechanically deboned chicken meat(MDCM) from whole carcass, whole carcass without exsanguination, neck without skin, leg hone, and upper back and rib were studied. Also, the effects of adding different levels of gelatin and MDCM to the comminuted meats were investigated. Proximate composition values of MDCM ranged from 54.2 to 68.6% moisture, 14.5 to 19.7% protein, 12.3 to 30.1% fat, and 1.1 to 1.3% ash. The MDCM from leg hone had a higher content of fat, and a lower contents of moisture and protein. The MDCM from neck without skin tended to be opposite to the MDCM from leg hone. The total pigment and myoglobin levels were highest in MDCM from whole carcass without exsanguination such as 3.83 and 0.29 rng /g, and those from the other parts were 1.58~2.93 mg /g and 0. 17~0.31 mg /g, respectively. The emulsifying capacity and water holding capacity were highest in MDCM from neck without skin which contained lower levels of fat, collagen and hydroxyproline, but a higher level of salt soluble protein. The emulsifying capacity of comminuted meat decreased as gelatin content increased. The extractability of hydroxyproline from gelatin showed a higher solubility in acidic solution. The MDCM could he added up to 20% level without detrimentally affecting functional properties of comminuted meats although they had less water holding capacity and cooking loss as the proportion of MDCM increased.

• Applied Biological Chemistry
• /
• v.33 no.3
• /
• pp.203-208
• /
• 1990

The physical characteristics of texture, water holding capacity, color and swelling of soybean curd were studied for 14 varieties of soybeans grown in Korea. The relative water holding capacity, measured by moisture absorption method with using filter paper, was high for Millyang-21. Danyeob and Hwangum, low for Suwon-138, -141 and -142. All of the soybean curd prepared showed negative Sag values, which indicates swelling properties of Tofu as it as released from pressed condition. The most swollen variety was Suwon-138 and the least one was Suwon-142. Generally, soybean curd having high moisture content had low valuss in hardness but no significant relationship was found. Elasticity ud cohesiveness showed a little differences except Suwon-138. Other textural characteristics of fracturability, adhesiveness and gumminess showed a wide range in their values among the varieties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.290-296
• /
• 2020

We investigated the effect of the modified starch [physical treatment, acetate (SA-1, SA-2, and SA-3), hydroxypropyl (HS), and acetylated distarch adipate] content on the physicochemical properties of fish cakes, called Eomuk in Korea, during storage at -20℃. When wheat flour (native starch, NS) was used, the moisture content decreased during frozen storage, resulting in a lower water-holding capacity and higher expressible drip. Compared with NS, adding modified starch had a lower effect on the moisture content during frozen storage. The water-holding capacity and expressible drip differed with the type of modified starch added. The expressible drip was lowest with HS; the SA-3 and HS modified starch were whiter than NS. Therefore, HS and SA-1 are suitable additives to improve the quality of frozen fish cakes.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.2
• /
• pp.138-145
• /
• 2003

The effects of adding egg white, bovine plasma protein(bpp), gelatin and gluten on the rheological properties of squid meat paste product(squid meat kamaboko) were examined by the measurements of jelly strength, texture, moisture content, water holding capacity(WHC) and folding test. The optimum added levels for jelly strength of squid meat kamaboko were 4% of egg white, 5% of bovine plasma protein, 3% of gelatin and 4% for gluten. However, it is no increase that at added additives of over this concentrations were. Bovine plasma protein gave the highest jelly strength among the all additives at every concentration. Folding tests value of the optimum added levels were all B value. In this case moisture content and water holding capacity were 72.06∼73.78% and 88.53∼91.11% in jumbo squid, also flying squid were 71.91∼72.89% and 90.21∼93.25%, respectively. The additives were increased the jelly strength, hardness and water holding capacity(WHC), and these effects were eliminated by adjusting the water-content to the value of the control sample without additives.