• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.541-546
• /
• 2012

This study investigates the detection system of oil pollution level using single optical fiber sensor. This study focus on sensing of oil pollution by moisture and iron powder which are representatives of oil pollution factor. In addition, It is placed that the water and iron powder as an oil pollution factor in the oil tank which is the oil circulation in. The oil pollution detection system was measured by the changing of intensity of light and sensing gap. The result of this experimentation not only confirmed the contamination by moisture volume in the oil tank from the section 190ppm to 540ppm, but also monitored the contamination by iron volume from the section 1200ppm to 3500ppm. This study confirmed effectiveness of this detection system using optical fiber sensor. There is expectations of measuring another section by various optical fiber sensor.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.16-25
• /
• 2000

The influence of four process parameters of soft nip calendering including calendering pressure, temperature, moisture content and nip residence time on bulk, smoothness and tensile strength of newsprints has been investigated. In addition, the effect of basis weights on calendering responses has been examined. Bulk of newsprints decreased and smoothness increased with the increase of the calendering pressure, temperature, moisture content of the sheets and nip residence time. Improvement in tensile strength was observed when low calendering pressure and high temperature of heat-ing roll were employed. Tensile strength of the newsprint, however, decreased abruptly when the calendering temperature and pressure increased above certain levels due to the rupture of sheet structure, which has been verified by SEM. SEM micrographs also showed that it would be possible to maintain the inner bulk while densifying the fibers on the outer surface of newsprint by adjusting the soft nip calendering variables properly.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.31-36
• /
• 1986

As a part of study on automatic control system for green houses, an automatic irrigation system was developed by using microcomputer. For the study, gypsum block was used as a sensing device of soil moisture and its data was designed to transfer to microcomputer through A/D converter. Also, software which be able to control the irrigation time and flow rate by the solenoid valve was developed. This system was tested by using practical data and the following results were summarized. 1. Since the gypsum was very accurate in addition with chiep and easy to manufacture, it turned out to be a very good device to detect the soil moisture in this system. 2. Also, solenoid valve was very excellent device for controlling the water flow rate since its control error is less then 1% when the irrigation time is over 100 seconds.

• 환경위생공학
• /
• 제13권2호
• /
• pp.88-94
• /
• 1998

This study was investigated the application of biofiltration using cometabolic process to remediate gaseous toluene that are highly recalcitrant to adsorption, absorption and biodegradation. The investigation was conducted using specially built steel columns packed with granular activated carbon for removal of toluene and G.A.C was also coated with Pseudomonas putida microorganisms by addition of KH$_{2}$PO$_{4}$. The biofilter unit was operated in the condition of dry and 27.5% moisture content at gas loading rate of 12.5 l/min. Gaseous toluene taken from tedlar bag was analyzed by the use of G.C. equipped with F.I.D. detector. The removal efficiency of gaseous toluene was 85% at average inlet concentration of 970 ppm during dry operating condition. For gaseous toluene, 91% removal efficient was obtained at the filter material with moisture content and 97% removal efficiency was obtained with Pseudomonas putida microorganisms at gas loading rate of 12.5 l/min.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.691-694
• /
• 2005

The present study was to examine the influence of porosity and moisture content on the water permeability, strength and plant-growth characteristics of porous concrete. The result of the experiment verified that the coefficient of permeability of porous concrete with porosity between $30\%\;and\;36\%$ increased by 2cm/sec and the compressive strength decreased 1MPa at every $3\%$ increase of porosity. In addition, the plant growth of porous concrete showed 5cm at $36\%$ porosity and 2.5cm at $30\%$ porosity respectively. Thus, the higher the porosity, the more the plant grew. When $2\%$ moisture content was used in porous concrete with the same porosity, the plant growth was accelerated two times faster than the case without it.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.345-348
• /
• 2006

FRP composites which are used in strengthening existing structure are usually adhered to the concrete surface, their performance are directly affected by environmental condition such as freezing-thawing and moisture. Accordingly, it is required to evaluate bond durability between FRP composite and concrete as well as FRP materials itself. The durability characteristics of FRP composite for freezing-thawing are evaluated in this study with the variables of concrete strength, type of FRP composite, freezing-thawing conditions and freezing-thawing cycle. In addition, material durability of GFRP sheet for high temperature/high humidity condition are examined in this experimental study.

• 한국식품조리과학회지
• /
• 제21권5호
• /
• pp.585-590
• /
• 2005

The purpose of this study was to investigate the effects of oriental medicinal plant extracts added to chocolates on the moisture content, color, radical scavenging activity and sensory characteristics. The oriental medicinal plant extracts were added at a weight percentage of 0, 4 and 8%. As the ratio of the extracts in the chocolates increased, the moisture content, color, and radical scavenging activity increased. In sensory evaluation, significant differences (p<0.05) were shown in taste, bitterness, and overall acceptability depending on the addition of oriental medicinal plant extracts but there were no significant differences in chocolate aroma and texture.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.15-23
• /
• 2000

Effect of fixation methods on the flame retardant(FR) and performance properties of MDPPA/HMM treated cotton fabrics were studied. Combination of three different fixation methods - premercerization, swelling agent treatment, pad dry cure fixation, and wet fixation - were applied to flame retardant finish of cotton with MDPPA/HMM. As a result, an increase in internal volume of cotton fiber by pre-mercerization and addition of swelling agent, and wet fixation increased %add-on of FR agent improving FR efficiency and wash fastness. Tensile strength of MDPPA/HMM treated cotton fabrics by wet fixation and swelling agent were slightly decreased, but that of premercerized cotton was improved. Wet fixated fabric showed lower bending rigidity and better compressional properties which improved fabric hand. Retention of swelling ability of cotton treated with MDPPA/HMM improved moisture absorption properties.

• 대한기계학회논문집B
• /
• 제26권1호
• /
• pp.55-65
• /
• 2002

In this study, the procedures for the preliminary design of the turbo-shaft engine for the light multi-purpose helicopter are established. The engine specifications are determined through the performance analysis on the on-design and off-design conditions by the use of simulation program. In addition, the effect of humidity on the engine performance is examined by considering the change of the gas properties and characteristic maps due to moisture contents. The calculation results show that the engine power is reduced by the existence of moisture in working fluid.

• 한국식품위생안전성학회지
• /
• 제10권4호
• /
• pp.199-204
• /
• 1995

The antifungal effects of polyposphates on the growth and T-2 toxin production of Fusarium sporotrichioides M-1-1 were investigated. The growth of the strain was significantly inhibited in the potatoes dextrose agar medium treated with 1.5% polyphosphates or more. When we checked T-2 toxin by the indirect competitive ELISA, the strain produced 11.25 ug/ml and 10.90 ug/ml levels of T-2 toxin rice and corn containing 50% moisture contents, respectively. However, T-2 toxin was little detected in rice medium and corn medium with 1.5% polyphosphates addition for short(14 days) and prolonged incubation time(45 days). We also observed the destruction of cell wall and outflow of cell ingredients with 1% polyphosphates treatment to the strain. Therefore, moisture and polyphosphates greatly effected on the growth and T-2 toxin production of the strain.