• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.85-109
• /
• 2017

The paper presents the laboratory study of clayey soil stabilized with Pond ash (PA), Rice husk ash (RHA), cement and their combination used as stabilizers to develop and evaluate the performance of clayey soil. The effect of stabilizer types and dosage on fresh and mechanical properties is evaluated through compaction tests, unconfined compressive strength tests (UCS) and Split tensile strength tests (STS) performed on raw and stabilized soil. In addition SEM (scanning electron microscopy) and XRD (X-ray diffraction) tests were carried out on certain samples in order to study the surface morphological characteristics and hydraulic compounds, which were formed. Specimens were cured for 7, 14 and 28 days after which they were tested for unconfined compression tests and split tensile strength tests. The moisture and density curves indicate that addition of RHA and pond ash results in an increase in optimum moisture content (OMC) and decrease in maximum dry density (MDD). The replacement of clay with 40% PA, 10% RHA and 4% cement increased the strength (UCS and STS) of overall mix in comparison to the mixes where PA and RHA were used individually with cement. The improvement of 336% and 303% in UCS and STS respectively has been achieved with reference to clay only. Developed stabilized soil mixtures have shown satisfactory strength and can be used for low-cost construction to build road infrastructures.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권2호
• /
• pp.291-298
• /
• 2012

While attempting to develop low salt, low fat and high fibre chicken nuggets, the effect of partial (40%) common salt substitution and incorporation of chickpea hull flour (CHF) at three different levels viz., 5, 7.5 and 10% (Treatments) in pre-standardized low fat chicken nuggets (Control) were observed. Common salt replacement with salt substitute blend led to a significant decrease in pH, emulsion stability, moisture, ash, hardness, cohesiveness, gumminess and chewiness values while incorporation of CHF in low salt, low fat products resulted in decreased emulsion stability, cooking yield, moisture, protein, ash, color values, however dietary fibre and textural properties were increased (p<0.01). Lipid profile revealed a decrease in total cholesterol and glycolipid contents with the incorporation of CHF (p<0.01). All the sensory attributes except appearance and flavor, remained unaffected with salt replacement, while addition of CHF resulted in lower sensory scores (p<0.01). Among low salt, low fat chicken nuggets with CHF, incorporation CHF at 5% level was found optimum having sensory ratings close to very good. Thus most acceptable low salt, low fat and high fibre chicken nuggets could be developed by a salt replacement blend and addition of 5% CHF.

• 동아시아식생활학회지
• /
• 제23권5호
• /
• pp.586-596
• /
• 2013

This study was designed to investigate the effect of Korean whole wheat flour making pan bread. Korean whole wheat flour was mixed with flour at the level of 10% (WHF10), 20% (WHF20), 30% (WHF30), 40% (WHF40) and 50% (WHF50) in order to make bread. According to mixogram, the CON (control), WHF10, WHF20, WHF30, WHF40, except WHF50 were found to be proper between 3 and 5 min. in terms of peak time. CON and WHF10 for peak value were at the level of over 60%. By increasing the ratio of Korean whole wheat flour, the pH, dough fermentation rate, volume, specific volume and moisture content were decreased, and gumminess, cohesiveness and hardness except springiness, were increased for storage days. In the crumbScan analysis, the addition of Korean whole wheat flour decreased the volume and increased the crumb fineness of pan bread. In the sensory evaluation, WHF30 showed good preference in the aspect of flavor, taste and overall acceptance, but was not significant between WHF20. CON scored the highest points in volume, specific volume, moisture content and texture, but was not significant between WHF20.

• 대한가정학회지
• /
• 제38권3호
• /
• pp.121-130
• /
• 2000

This study attempted to determine the effects of sucrose, NaCl and acetic acid on the quality characteristics of cooked rice stored at 20$\^{C}$ for 72 hours. It conducted a moisture content, color value, texture and RVA(Rapid Visco Analyser) viscosity on stored cooked rice. Moisture contents of all groups ecreased during storage and that of cooked rice with NaCl were significantly lower than that of other groups. In color, lightness(L) of cooked rice with various additives seemed higher than that of control group and reduced b value of cooked rice with acetic acid showed that the color became less yellow. In texture, the hardness of cooked rice with NaCl and sucrose was higher than that of control group, whereas that of cooked rice with acetic acid was similar to that of control group. Adhesiveness of cooked rice with acetic acid was higher than that of other groups and it was shown that texture could be improved by the addition of acetic acid. The initial viscosity of cooked rice with acetic acid was markedly higher than that of other groups and finial viscosity was lower than that of other groups. It seemed that addition of acetic acid could retard the retrogradation of stored cooked rice.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.743-746
• /
• 2004

This research investigates experimentally an effect on the properties of the high flowing concrete according to variations of concrete materials and site conditions. Variations of sensitivity test are selected items as followings; (1)Concrete temperature, (2)Unit water(Surface moisture of fine aggregate), (3)Fineness modulus of fine aggregate, (4)Addition ratio of high-range water reducing agent. And fresh conditions of the high flowing concrete should be satisfied with required range including slump flow$(65{\pm}5cm)$, 50cm reaching time of slump flow$(4\~10sec)$, V-box flowing time$(10\~20sec)$, U-box height(min.300mm) and air content$(4{\pm}1\%)$. As results of sensitivity test, material variations and site conditions should be satisfied with the range as followings; (1)Concrete temperature is $10\~20^{\circ}C$ (below $30^{\circ}C$), (2)Surface moisture of fine aggregate is within ${\pm}0.6\%$, (3)Fineness modulus of fine aggregate is $2.6{\pm}0.2$ and (4)addition ratio of high range water reducing agent is within $1\%$ considered flow-ability, self-compaction and segregation resistance of the high flowing concrete.

• 한국의류학회지
• /
• 제37권8호
• /
• pp.1107-1116
• /
• 2013

This study examined the use of cutinase and lipase to process cotton/polyester blend fabric. Optimum treatment conditions for cutinase and lipase were investigated for cotton/polyester blend fabric. The properties of enzyme-treated fabrics were evaluated and compared in optimal treatment conditions. In addition, the possibility to provide an enzymatic finishing on blend fabrics using mixed enzymes in a two-step process were studied. The weight loss of cotton/polyester blend fabrics with Triton X-100 was 0.8% and the dyeing property of blend fabrics with calcium chloride increased by a factor of 1.2. The use of two enzymes in combination with cutinase and lipase in the presence of auxiliaries resulted in a cotton/polyester blend fabric weight loss of 0.8%. In addition, the dyeing properties of cotton/polyester blend fabrics improved by a factor of 1.5 and the moisture regain of cotton/polyester blend fabrics improved by a factor of 1.16. However, no marked loss was observed in tensile strength. The surface morphology of cotton/polyester blend fabrics is modified through a two-enzyme treatment. The treatment of cotton/polyester blend fabrics with cutinase and lipase maintains cotton strength and improves the moisture regain of polyester fabrics.

• Journal of Microbiology and Biotechnology
• /
• 제27권9호
• /
• pp.1657-1663
• /
• 2017

Cosmetic patches have recently been developed as skin products for personal care owing to rapid advances in the technology of delivery of active ingredients, moisture, and adhesiveness to skin. Alginate and Spirulina are typical marine resources used in cosmetic products. This research involved the development of a Spirulina extract-impregnated alginate nanofiber cosmetic patch supported by a polycaprolactone (PCL) nanofiber cover (Spi/Alg-PCL NF patch). In addition to the ability of alginate to affect moisture and adhesiveness to skin, the impregnation of Spirulina extract strengthened those abilities as well as its own bioactive effectiveness. All fabrication processing steps were undertaken in aqueous solution. The three components (alginate, Spirulina extract, and PCL) had no detected cytotoxicity in human keratinocyte cell-based examination. In addition, wetting the pre-dried patch on the skin resulted in the Spirulina extract being released within 30 min. The results indicate the excellence of the Spi/Alg-PCL NF patch as a skin-care cosmetic device.

• 한국식품저장유통학회지
• /
• 제31권2호
• /
• pp.245-255
• /
• 2024

The proximate composition, quality characteristics, antioxidant activity, and sensory evaluation scores of yakgwa added with mealworm powder (MP) were examined. MP contained 5.83 wt% moisture, 55.70 wt% crude protein, 35.96 wt% crude fat, 3.70 wt% crude ash, and 2.43 wt% carbohydrate and feature total polyphenol and flavonoid contents of 406.52 mg GAE/100 g and 21.18 mg NE/100 g, respectively. The DPPH and ABTS^•+ radical scavenging activities and the reducing power of MP were determined as 90.25%, 44.06%, and 1.74, respectively. Except for moisture and carbohydrate content, the proximate composition of mealworm yakgwa (MY) increased with the amount of MP increased. The pH of the dough increased with the addition of MP, whereas the expansion degree tended to decrease. Sugar content was highest at MP contents of 0 wt% and 12 wt% (FM4 group), and hardness was lowest in the FM4 group. With the increasing MP content, the L, b values and antioxidant activity increased, whereas a value decreased. The sensory evaluation scores for the overall preference, appearance, color, and taste were lowest in the FM4 group. These results suggested that MP contents of 6-9 wt% were optimal for mealworm-based yakgwa.

• 한국수산과학회지
• /
• 제15권4호
• /
• pp.283-290
• /
• 1982

Sardine and mackerel so called dark muscled fish have been underutilized due to the disadvantages in bloody meat color, high content of fat, and postmortem instability of protein. Recent efforts were made to overcome these defects and develope new types of product such as texturized protein concentrates and dark muscle eliminated minced fish. Approach of this study is based on the rapid dehydration of foamed fish-starch paste by dielectric heating. In process comminuted sardine meat was washed more than three times by soaking and decanting in chilled water and finally centrifuged. The meat was ground in a stone mortar added Ivith adequate amounts of salt, foaming agent, and other ingredients for aid to elasticity and foam stability. The ground meat paste was extruded in finger shape and heated in a microwave oven to give foamed, expanded, and porous solid structure by dehydration. Dielectric onstant $(\varepsilon')$ and dielect.ic loss $(\varepsilon")$ values of sardine meat paste were influenced by wavelength and moisture level. Those values at 100 KHz and 15 MHz were ranged 2.25-9.86; 2.22-4,18 for E' and 0.24-19.24; 0.16-1.20 for E", respectively, at the moisture levels of $4.2-13.8\%$. For a formula for fish-starch paste preparation, addition of $20-30\%$ starch (potato starch) to the weight of fish meat, $2-4\%$ salt, and $5-10\%$ soybean protein was adequate to yield 4-5 folds of expansion in volume when heated. Addition of e99 yolk was of benefit to micronize foam size and better crispness. In order to provide better foaming and dehydration, addition of $0.2-0.5\%$sodium bicarbonate, foaming agent, was proper to result in foam size of 0.5-0.7 mm and foam density of $200-400\;/cm^2$ which gave a good crispness. Heating time was depended upon the moisture level of fish-starch paste. For a finger shaped paste (1.0cm. $D\times10cm.L$) heating for 150-200 sec. in a microwave oven (700W. 2.45GHz) was sufficient to generate foams, expand, and solidify the porous structure of fish-starch paste. When the moisture content was above $55\%$ browning and scorching was deepened due to over-expansion and over-heating whereas the crispness was hardened by insufficient expansion at lower moisture content. In quality evaluation of the product, chemical composition of $30\%$ starch and $3\%$ salt added product was moisture $8.8\%$, lipid $2.4\%$, carbohydrate $46.7\%$, protein $36.1\%$, and ash $6.0\%$. Eleven membered panel test evaluated that fish-starch paste was acceptable in color, crisp-ness, taste, except a trace of fishy odour which could be masked by the addition of spice extracts.

• 한국조리학회지
• /
• 제18권2호
• /
• pp.172-181
• /
• 2012

아가리쿠스 버섯 분말을 0, 2, 4, 6, 8, 10%를 첨가한 설기떡의 수분함량, 색도, 조직감, 관능검사 특성은 다음과 같다. 수분함량은 아가리쿠스 버섯 분말 첨가량이 증가할수록 감소하는 경향을 보였다. 색도는 아가리쿠스 버섯 분말의 첨가량이 증가할수록 L 값은 낮아지고 a 값과 b 값은 증가되었다. 조직감 측정 결과 경도(hardness), 점착성(gumminess)과 씹힘성(chewiness)은 아가리쿠스 버섯 분말의 첨가량이 증가할수록 각각 증가하는 경향을 보였으나 부착성(adhesiveness)과 탄력성(springiness)은 각각 감소하는 경향을 보였다. 관능검사 결과 색(color), 향(flavor), 종합적인 특성(overall acceptability)에서는 아가리쿠스 버섯 분말 6% 첨가군이 가장 좋게 평가되었다. 따라서 색과 향 및 종합적인 특성에 있어 좋게 평가된 아가리쿠스 버섯 분말 6% 첨가군이 바람직한 품질 특성을 위한 첨가 수준이라 할 수 있다.