• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.38-42
• /
• 1999

Average moisture content of 30mm-thick Korean red pine(Pinus densiflora) was estimated nondestructively and continuously using surface temperature rise by radiation heating and moisture gradient profile in wood. The surface temperature rises increased as surface moisture contents decreased and good relationships were found between surface moisture contents and surface temperature rises at three different feed speeds of 10, 20 and 30 m/min. Average moisture content could be described as a function of surface moisture content and wood thickness.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.459-464
• /
• 2009

This study was conducted to find the relationship between the moisture content and basic density of green lumber and the final moisture content of kiln dried lumber. The possibility of using a ultrasonic nondestructive testing technology was investigated. Four matched 2-foot long boards were kiln-dried for 12, 24, 36 and 48 hours. Twenty three slices were cut to examine the distribution of moisture content along the length. It was revealed that the green weight was a better estimator of the final moisture content of the kiln-dried board than the green moisture content. The standard deviations of the moisture contents of the slices were not correlated with the final moisture contents of the kiln-dried boards. The two ultrasonic devices used for this study were apparently good tools for NDT.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1995

The assessment for a degree of drought has been carried out based on the soil moisture index in Korea. The soil moisture index(Im) was calculated assuming of constant evapotranspiration until wilting point as Im = w2/wf $.$100. The soil moisture content(W2) at the final of a period is obtained from W2 : Pe + Wl - E, here the effective precipitation amount is Pe, evapotranspiration E, and the soil moisture content at the beginning of a period is Wl. The filed capacity(Wf), as a mean value of fine sandy loams, was reduced to 92 mm/ft when we accept the wilting point and the available soil moisture content of 42 mm/ft, respectively. The drought begins in Korea when the soil moisture index drops to less than 50%. The value coincides the isoline of 11 or more consecutive days without measureable precipitation. The soil moisture index frequently drops in the northern part of Youngnam area and Honam area so that both areas are well known as the areas of drought. Key word : Droughts, Soil Moisture Index.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.195-197
• /
• 2003

Soil moisture is a crucial variable in research works of hydrology, meteorology and plant sciences. Adequate soil moisture is essential for plant growth; excesses and deficits of soil moisture must be considered in agricultural practices. There are already several remote sensing methods used for monitoring soil moisture, such as thermal inertia, vegetation water-supplying index, crop water stress index and multi-factor regression. In this paper, an improved method has been discussed which is based on the thermal inertia. We analyzed the problems of monitoring soil moisture using satellites at first, and then put forward an simplified method which directly uses land surface temperature differences to measure soil moisture. Also we have taken the influence of vegetation into account, and import NDVI into the model. The method was used in the study of soil moisture in Heilongjiang Province, China, and we draw the conclusion by the experiments that the model can evidently increase the precision of monitoring soil moisture.

• Advances in concrete construction
• /
• v.13 no.6
• /
• pp.423-431
• /
• 2022

Although the influence of moisture content on the mechanical properties of concrete has been studied for a long time, research related to its influence on the damping and energy dissipation property of concrete structure is still very limited. In this paper, the relationship between damping property and moisture content of concrete using cyclic uniaxial compression is firstly presented, and the mechanism of the influence of moisture content on concrete damping and energy dissipation capacity is analyzed. Based on the experimental research, moisture-related damping and energy dissipation model is proposed. Results show that the dissipated energy of concrete and loss factor increase as the moisture content increasing. The energy dissipation coefficient reflecting the influence of stress level of concrete under cyclic load, decreases first and then increases as the moisture content increasing. The mechanism of moisture-related energy dissipation behavior can be divided into the reactive force of water, the development of the internal micro cracks and the pore water pressure. Finally, the proposed moisture-related damping and energy dissipation model are verified.

• Journal of the Korean Society of Tobacco Science
• /
• v.13 no.1
• /
• pp.61-68
• /
• 1991

The moisture contents of threshed leaf tobacco during aging storage were very important factor for the improvement or deterioration of leaf quality. Decay and carbonization of leaf tobacco were mainly controlled by moisture contents during storage. The influence of moisture contents on the decay and carbonization of threshed leaf tobacco (Flue-Cured, Var. NC 82. AB3O-1 grade) were examined during 1 year. The moisture contents of leaf tobacco were treated to 3 kg as 12% (controle), 16%, 20% and 24% after redrying, respectively, These tobacco were put into center of carton box containing about 200kg with 12%'s tobacco, and then packed and stored from June, 1988 under natural weather condition in warehouse at Ock-Cheon threshing plant. Samples were taken from dissected carton box at 0, 1, 2, 4, 7 and 12 months after moisture treatment and Racking time, and some chemical properties were investigated at every sampling time. In results of inducement to decay and carbonization of leaf tobaccos during 1 year's storage by moisture treatment. decayed leaf was appeared but carbonized leaf did not. Calorification and decayed leaf occurred at high moisture contents above 20%, and these phenomena were appeared between 30 and 150 days after moisture treatment and packing. High moisture content leaves (above 20%) caused nearby other leaves to be sunk with high moisture content. Nicotine and calcium contents were increased to 20%~30% and 10%~22%, respectively, but total sugar contents was decreased to 40%~60% by moisture treatment(20% ~24% ).

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.37-42
• /
• 1994

The adsorption of water vapor and equilibrium moisture content(EMC) of the specimens for four softwood species dried by conventional- and high temperature method and equilibrated to 15% of the target EMC condition at 25$^{\circ}C$ were determined by oven drying method and with moisture meters. The amount of adsorption for high temperature dried red pine was significantly higher than that of conventional kiln dried wood, while those of eastern white pine, eastern hemlock and Norway spruce were not significantly different between drying methods. EMCs of these four species determined by oven drying method and with capacitive admittance moisture meter were not significantly different between drying methods. EMC of high temperature dried red pine determined with resistance moisture meter was significantly higher than that of conventional kiln dried wood. But EMCs of other species did not show significant difference between drying methods. EMCs of conventional and high-temperature dried wood determined with electronic moisture meters, especially in the case of the capacitive-admittance moisture meter measurement, were lower than that determined by oven drying method.

• Computers and Concrete
• /
• v.3 no.2_3
• /
• pp.103-122
• /
• 2006

Drying shrinkage of concrete occurs due to the loss of moisture and thus, it is controlled by moisture diffusion process. On the other hand, the shrinkage causes cracking of concrete and affects its moisture diffusion properties. Therefore, moisture diffusion and drying shrinkage are two coupled processes and their interactive effect is important for the durability of concrete structures. In this paper, the two material parameters in the moisture diffusion equation, i.e., the moisture capacity and humidity diffusivity, are modified by two different methods to include the effect of drying shrinkage on the moisture diffusion. The effect of drying shrinkage on the humidity diffusivity is introduced by the scalar damage parameter. The effect of drying shrinkage on the moisture capacity is evaluated by an analytical model based on non-equilibrium thermodynamics and minimum potential energy principle for a two-phase composite. The mechanical part of drying shrinkage is modeled as an elastoplastic damage problem. The coupled problem of moisture diffusion and drying shrinkage is solved using a finite element method. The present model can predict that the drying shrinkage accelerates the moisture diffusion in concrete, and in turn, the accelerated drying process increases the shrinkage strain. The coupling effects are demonstrated by a numerical example.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.75-80
• /
• 1996

The purpose of this study is to clarify the mechanism of moisture transfer depend on the thickness of the spruce(Picea sitchensis Carr.). Therefore, as the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens and temperature of it's surfaces in vapor transmission process were investigated. The experiment was conducted in a steady state. and the moisture distribution was measured by knife cutting and weighing the specimens. The following conclusions were obtained ; 1. It can be found that distribution of moisture in the specimen can be approximated by two different straight lines intersecting at nine or ten percent moisture content. The amount of moisture movement defends on the gradient of moisture in the wood. 2. It is investigated that the wood surface moisture contents(MCs) are less for thinner specimens than for thick ones on the absorption side. On the other hand, the wood surface MCs are greater for thinner specimens than for thick ones on the desorption side. The main factor that affects the EMC of wood would be temperature when the relative humidity of atmosphere is constant. The specimen generate heat with the absorption and desorption process. In addition, the velocities of moisture transmission varied with the thicknesses of specimens. If the temperature of wood becomes greater, its MC decreases. Then the difference between surface MC and EMC of adsorption and desorption side becomes greater for thinner specimens. Therefore it is considered that the coefficients of moisture transfer decreases with the increases of the specimens' thicknesses.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1273-1275
• /
• 1996

Moisture measurements of s intering materials were performed using the simulator which can simulate various conditions taking place at the belt-conveyor of sintering process. The moisture sensor used in this experiment is NIR moisture meter(JE-330, KETT Electric Lab.). Using the simulator, we measured the moisture contents of sintering materials at different conditions. We found that the moisture content decreased as the rotation speed increased and the size of the sintering materials became smaller.