• ETRI Journal
• /
• 제28권1호
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.43-52
• /
• 1996

This paper describes interactive computer procedures for design the forming sequences in cold forging. This system is implemented on the personal computer and its environment is a commercial AutoCAD system. The programming language. AutoLISP, was used for the configuration of the system. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the part is a key in process planning. To recognize the part section geometry, the section entity representation, the section coordinate-redius representation and the section primitive geometru were adopted. This system includes six major modules such as input module, forging design module, forming sequence design module, die design module, FEM verification module and output module which are used independently or in all. The sequence drawing wigh all dimensions, which includes the dimensional tolerances and the proper sequence of operations, can generate under the environment of AutoCAD. The acceptable forming sequences can be verified further, using the FE simulation.

• 디지털콘텐츠학회 논문지
• /
• 제19권7호
• /
• pp.1281-1287
• /
• 2018

이 연구에서는 중도중복장애아동을 위한 보완대체 의사소통(AAC) 앱의 모듈별 세부적 요소와 기능을 도출하고 이에 해당하는 인터페이스를 설계하였다. 연구 결과, 화면구성, 의사소통 판 편집, 시청각출력, 스위치&스캐닝 모듈별 세부 프로그램 구성은 다음과 같다. 화면구성 모듈은 의사소통 범주, 철자판, 즐겨찾기, 화면잠금, 설정 기능으로 구성된다. 의사소통 판 편집 모듈에서는 의사소통 범주, 상징, 즐겨찾기 편집 기능이 포함된다. 시청각적 출력 모듈은 청각적 출력의 형태로 음성의 높낮이, 강도, 속도, 음색을 개인별로 조정하는 기능을 제공한다. 시각적 출력의 형태에서는 칸의 배경색과 크기, 테두리 색과 두께를 조정한다. 스위치&스캐닝 모듈에서는 칸이 청각적, 시각적으로 표시되었을 때 스위치를 누름으로써 선택(클릭)이 이루어지는 기능을 제공한다. 향후 이 연구에서 제시한 프로그램을 실제로 구현한 AAC 앱의 개발이 필요하다.

• 한국음향학회지
• /
• 제31권5호
• /
• pp.309-316
• /
• 2012

본 논문에서는 다중 전압을 사용하는 초소형 시스템 구성 및 모듈 설계 방법론을 제시한다. 특히 잡음에 취약한 아날로그 IC의 특성을 개선하기 위한 PDN 구성 방법과 필터 구성 방법에 중점을 두어 설계하였다. 이에 제작된 모듈은 고전압에 의한 잡음을 방지하기 위해 공급 전원별로 접지면을 분할하고, 이를 공통 접지면으로 구성하기 위해 필터를 연결하였으며, via stitching 기법을 사용하였다. 이를 본 논문에서는 PDN 구조를 Lumped 모델로 구성하여 시뮬레이션을 통해 분석하고, 측정을 통해 확인하였다. 시뮬레이션 결과 4.7 uH의 Inductor를 연결하였을 때, 공통 접지면을 사용했을 때보다 -7 dB의 잡음 감소 효과를 확인할 수 있었고, 측정 결과 약 12 %가 감소하였음을 확인할 수 있었다.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.1-11
• /
• 2008

This research presents a study for the knowledge-based configuration design development of a RC (remote control) helicopter. Parametric design and knowledge based design concepts are introduced for rapid design changes and analyses using commercial CAD software, CATIA(R) Knowledgeware module. It is crucial for RC helicopter design because it enables rapid conceptual design through instant configuration changes. Positions and dimensions of RC helicopter parts were used as design parameters. As an example, positions of CG(center of gravity) points were traced and plotted as the configuration changes. Further research should be performed in areas of user interfaces and web-based multi-user environments instead of using Excel data sheets.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.22-27
• /
• 2001

Cochlea is well known to have the ability to analyze a wide frequency and this ability seems to be caused to the Basilar Membrane(BM) configuration. However, the relationship between the Cochlea frequency-position map is not clear. In this paper, the three-dimensional BM Model was made using the Finite Element method. Then, an attempt was made to examine the influence of the BM configuration on the Cochlea frequency-position map. Theoretical consideration reveals that the wide frequency-position of Cochlea is achieved by not only the BM configuration change along the length of the Cochlea but also the change of the Young's module of the BM along the length of the Cochlea.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.114-119
• /
• 2002

Cochlea is well known to have the ability to analyze a wide frequency and this ability seems to be caused to the Basilar Membrane(BM) configuration. However, the relationship between the Cochlea frequency-position map is not clear. In this paper, the three-dimensional BM Model was made using the Finite Element Method. Then an attempt was made to examine the influence of the BM configuration on the Cochlea frequency-position map. Theoretical consideration reveals that the wide frequency-position of Cochlea is achieved by not only the BM configuration change along the length of the Coohlea but also the change of the Young's module of the BM along the length of the Cochlea.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.109.4-109
• /
• 2002

$\textbullet$ modularized personal robot controller $\textbullet$ module interface $\textbullet$ The structure of the virtual machine $\textbullet$ RPL (Robot Programming Language) $\textbullet$ compiler $\textbullet$ Port Configuration $\textbullet$ API

• Journal of applied mathematics & informatics
• /
• 제15권1_2호
• /
• pp.201-210
• /
• 2004

We examine a k-configuration X in P$^2$ or P$^3$ whose minimal free resolution has a non-cancelable Betti number in the last free module. We also find partial answers to the question: which Artinian O-sequences are level or not?