• 제목/요약/키워드: modulation transfer function(MTF)

검색결과 201건 처리시간 0.023초

우리별 인공위성의 지상 촬영 장치에 쓰여진 렌즈의 MTF 측정 (MTM MEASUREMENT OF THE LENS ON THE KITSAT-1 EARTH IMAGING SYSTEM)

  • 류광선;민경욱;유상근
    • Journal of Astronomy and Space Sciences
    • /
    • 제11권2호
    • /
    • pp.320-326
    • /
    • 1994
  • 한국과학기술원 인공위성 연구센터에서는 1992년 8월과 1993년 9월에 마이크로 위성인 우리별 1호와 2호를 발사, 운용중이다. 두 위성 모두에는 지표면을 촬영하기 위한 CCD 카메라가 실려있다. 이들 카메라에 쓰여진 렌즈(촛점거리: 50mm)를 평가하기 위해 MTF(Modulation Transfer Function) 측정을 하였다. 실험을 위해 표준과학연구소의 MTF 측정장치를 사용하였으며, f-number와 field angle을 변화시켜 가면서 측정하였다. 측정 결과로부터 f-number가 4.0 보다 작을때, 점광원으로부터 나온 빛이 CCD 칩의 한 화소(pixel) 안으로 들어 간다는 사실을 알 수 있었으며, field angle을 변화시켜가면서 tangential MTF와 sagital MTF를 측정한 결과, field angle이 증가함에 따라 MTF 값이 떨어짐을 알 수 있었다.

  • PDF

의료용 디지털방사선영상의 공간분해능 최적화에 의한 소듐냉각고속로 연료봉 내부의 소듐 충전상태 평가 (Evaluation of the Filling Sodium States Inside the Fuel rod of Sodium-Cooled Fast Reactor by Optimized Spatial Resolution in Medical Digital Radiographic Images)

  • 성열훈
    • 한국방사선학회논문지
    • /
    • 제10권2호
    • /
    • pp.117-124
    • /
    • 2016
  • 본 연구에서는 디지털 의료용 X선을 이용하여 소듐냉각고속로 금속연료봉 내부의 소듐 충전상태를 평가하고자 하였다. 의료용 X선은 디지털방사선(digital radiography, DR)시스템을 사용하였다. 최상의 공간분해능을 도출하기 위해 X선관의 초점크기와 디지털영상후처리 방법을 변화시켰다. 이때 텅스텐을 이용한 에지방법의 변조전달함수(modulation transfer function, MTF)를 사용하여 선예도(0.5 MTF)와 해상도(0.1 MTF) 를 평가하였다. 그 결과 소초점에서 영상후처리의 대조도를 강화시킨 조건에서 3.871 lp/mm (0.1 MTF)와 3.290 lp/mm (0.5 MTF)의 공간분해능을 얻었다. 결론적으로 이러한 결과는 디지털 의료용 X선을 이용하여 소듐냉각고속로 금속연료봉 내부의 소듐 충전상태를 관찰할 수 있었다.

구강 내 촬영용 센서의 정량적 평가 (Quantitative Analysis for Digital Intraoral Sensor)

  • 정재호;정재은;강희두;나극환
    • 대한디지털의료영상학회논문지
    • /
    • 제11권2호
    • /
    • pp.109-114
    • /
    • 2009
  • Carried out an experiment for quantitative evaluation about intraoral sensor among oral dental imaging equipments in PACS environment. For evaluation, testing environment & evaluation criteria are established that refer to the 'IEC 62220-1-2' and experimented with set up the standard radiation penetration that correspond with RQA-3(IEC 61267). Results of experiments using the image J, derived the ESF(edge spread function), LSF (line spread function) and calculated the MTF(modulation transfer function) finally. As a result, the MTF that 0.1, 0.2sec are 10% about 10 lp/mm and 0.32 sec is the 10% about 9 lp/mm in level represents the value of the MTF. Change of scan condition in dental environmental, according to the MTF value taken note that no changes can be seen enough. However, the dimensions of each other size $1(1200{\times}1600)$, size $2(1440{\times}1920)$ intraoral sensors for 3 lp/mm, respectively 40%, 90% of the note might have been the difference between the value of MTF, in accordance with standard sensors might note differences could be observed.

  • PDF

Simulation of the Through-Focus Modulation Transfer Functions According to the Change of Spherical Aberration in Pseudophakic Eyes

  • Kim, Jae-hyung;Kim, Myoung Joon;Yoon, Geunyoung;Kim, Jae Yong;Tchah, Hungwon
    • Journal of the Optical Society of Korea
    • /
    • 제19권4호
    • /
    • pp.403-408
    • /
    • 2015
  • To evaluate the effects of spherical aberration (SA) correction on optical quality in pseudophakic eyes, we simulated the optical quality of the human eye by computation of the modulation transfer function (MTF). We reviewed the medical records of patients who underwent cataract surgery in Asan Medical Center, retrospectively. A Zywave aberrometer was used to measure optical aberrations at 1-12 postoperative months in patients with AR40e intraocular lens implants. The MTF was calculated for a 5 mm pupil from measured wavefront aberrations. The area under the MTF curve (aMTF) was analyzed and the maximal aMTF was calculated while changing the SA ($-0.2{\sim}+0.2{\mu}m$) and the defocus (-2.0 ~ +2.0 D). Sixty-four eyes in 51 patients were examined. The maximal aMTF was $6.61{\pm}2.16$ at a defocus of $-0.25{\pm}0.66D$ with innate SA, and $7.64{\pm}2.63$ at a defocus of $0.08{\pm}0.53D$ when the SA was 0 (full correction of SA). With full SA correction, the aMTF increased in 47 eyes (73.4%; Group 1) and decreased in 17 eyes (26.6%; Group 2). There were statistically significant differences in Z(3, -1) (vertical coma; P = 0.01) and Z(4, 4) (tetrafoil; P = 0.04) between the groups. The maximal aMTF was obtained at an SA of $+0.01{\mu}m$ in Group 1 and an SA of $+0.13{\mu}m$ in Group 2. Optical quality can be improved by full correction of SA in most pseudophakic eyes. However, residual SA might provide benefits in eyes with significant radially asymmetric aberrations.

디지털 의료영상에서 슬릿법에 의한 Modulation Transfer Function의 보정방법 (Correction Method of Slit Modulation Transfer function on Digital Medical Imaging System)

  • 김정민;정회원;민정환;임은경
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제29권3호
    • /
    • pp.133-139
    • /
    • 2006
  • 디지털 X선영상으로 출력한 화상데이터를 Personal Computer로 가져와서 디지털 특성곡선, MTF, 위너스펙트럼을 계산할 수가 있다. 여기서는 디지털화상의 선예도를 후지타(藤田) 등의 이론에 의한 프리샘플링(presampling) Modualtion Transfer Function(MTF)을 산출하고 보정하는 방법에 대하여 검토하였다. 사용한 프로그램은 엑셀이며 슬릿의 촬영, 디지털 특성곡선, 합성 LSF법, 이산 퓨리어 변환, 고속 퓨리어 변환 등의 순서로 기술하였다. 이 방법의 커다란 장점은 퓨리어트랜스폼의 공식과 MTF 산출과정을 완전히 이해할 수 있다는 점과, 별도로 값비싼 프로그램이나 컴퓨터언어를 배우지 않았어도 MTF 결과를 산출할 수가 있다는 것이다. 그리고 워크시트 표시되는 엑셀의 장점을 그대로 살려 X선 영상계의 오류나 산출결과의 부적합성을 발견하기 쉽다는 점이다.

  • PDF

복잡한 배경 제거를 통한 치아 X-ray 영상의 선예도 개선 (Sharpness Enhancement of Tooth X-ray Images Through Elimination of Complicated Background)

  • 나건우;류근호
    • Journal of Information Technology Applications and Management
    • /
    • 제30권1호
    • /
    • pp.11-19
    • /
    • 2023
  • To remove unnecessary background from tooth X-ray images and enhance the sharpness of tooth and gum images, image processing techniques including contrast adjustment and histogram equalization are used. The introduction of two methods for detecting the boundary of the tooth and gum region and separating the tooth and gum from the background. In both cases, the background of the tooth X-ray images could be removed as a result, improving the quality of the images. The proposed method improves MTF (Modulation Transfer Function), an image performance indicator, as a result of measuring MTF. The original image's spatial frequency ranged from 4.73 to 11.40 lp/mm at the 10% response, whereas the proposed image's spatial frequency ranged from 10.90 to 11.85 lp/mm, giving uniformly enhanced results. In contrast, tooth and gums could not be completely separated from the background using Apple's Lift subject from background function.

Initial On-Orbit Modulation Transfer Function Performance Analysis for Geostationary Ocean Color Imager

  • Oh, Eun-Song;Kim, Sug-Whan;Cho, Seong-Ick;Ryu, Joo-Hyung;Ahn, Yu-Hwan
    • Journal of Astronomy and Space Sciences
    • /
    • 제29권2호
    • /
    • pp.199-208
    • /
    • 2012
  • The world's first geostationary ocean color imager (GOCI) is a three-mirror anastigmat optical system 140 mm in diameter. Designed for 500 m ground sampling distance, this paper deals with on-orbit modulation transfer function (MTF)measurement and analysis for GOCI. First, the knife-edge and point source methods were applied to the 8th band (865 nm) image measured April 5th, 2011. The target details used are the coastlines of the Korean peninsula and of Japan, and an island 400 meters in diameter. The resulting MTFs are 0.35 and 0.34 for the Korean East Coastline and Japanese West Coastline edge targets, respectively, and 0.38 for the island target. The daily and seasonal MTF variations at the Nyquist frequency were also checked, and the result is $0.32{\pm}0.04$ on average. From these results, we confirm that the GOCI on-orbit MTF performance satisfies the design requirements of 0.32 for 865 nm wavelength.

DCT 영역에서의 인간의 시각적 특성을 이용한 정지 영상 워터마킹 방법 (Still Image Watermarking in the DCT Domain Using the Human Visual System)

  • 권오형;박래홍
    • 한국통신학회논문지
    • /
    • 제30권12C호
    • /
    • pp.1214-1221
    • /
    • 2005
  • 본 논문에서는 DCT 평면에서 modulation transfer function (MTF)을 사용한 정지영상 워터마킹 방법을 제안하였다. 정지영상에 삽입된 워터마크의 가시성을 줄이기 위하여 인간의 시각적 특성을 나타내는 MTF를 사용하였다. 제안한 워터마킹 방법이 lowpass filtering 및 cropping 등의 공격에 강인한 특성을 나타내었다. 공간평면과 DCT 평면 사이의 에너지 상관관계를 이용하여 DCT 평면에서 삽입될 워터마크의 길이와 공간 평면에서 원하는 peak signal to noise ratio (PSNR)가 주어졌을 때 DCT 평면에서 워터마크 weighting factor를 구하는 식을 유도하였으며, 원하는 PSNR과 공간평면 및 DCT 평면에서 계산된 PSNR이 본 실험에서 사용한 7가지 영상에 대하여 최대 0.07dB이내로 오차를 나타내었다.

정지궤도 기상위성 영상기 MTF 특성 분석 (MTF Characteristics in GEO Meteorological Imager)

  • 조영민
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2003년도 하계학술발표회
    • /
    • pp.30-31
    • /
    • 2003
  • 본 연구에서는 통신해양기상위성의 기상관측 탑재체인 기상 영상기(Imager)의 개발을 위해 정지궤도 위성의 분광 채널별 Modulation Transfer Function (MTF) 특성을 현재 운영 및 개발 중인 위성 영상기 기술 범위에서 분석하였다. 통신해양기상위성은 국내 최초로 통신, 해양, 기상 3분야 복합 임무를 수행하는 정지제도 위성으로 2003년부터 개발되어 2008년 발사 예정이다. (중략)

  • PDF

고리형 위상 격자의 공간 주파수 필터 효과 (Spatial Frequency Filtering Characteristics of Annular Phase Gratings)

  • 김인길;고춘수;임성우;오용호;이재철
    • 한국전기전자재료학회논문지
    • /
    • 제17권9호
    • /
    • pp.994-1000
    • /
    • 2004
  • We studied the characteristics of annular phase gratings as spatial frequency filters. We first calculated the Fraunhofer diffraction patterns of annular gratings and then got the modulation transfer function (MTF) from the zeroth order Hankel transform of the intensity distribution function. Binaryphase annular grating shows higher diffraction efficiency than binary phase rectangular grating. But the MTF decreases linearly in the low-frequency region as that of rectangular grating does. The diffraction pattern of 4-phase annular grating is similar to that of 2-phase grating and hence MTFs of the two are much alike. For 8-phase annular grating, the 7th order diffracted beam is the lowest one next to the first. Consequently, the diffraction efficiency is very high and the MTF graph is curved upward. The diffracted beams except the first order are negligible and hence the MTF characteristics are more improved in the case of 16-phase grating. But the degree of improvement becomes lowered c(Impaled with 8-phase grating. We made a 16-phase annular grating and measured its MTF. The experimental result agrees well with the calculated one.