• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.581-588
• /
• 2013

In the basic GMSK, the modulated signals are generated by the preprocessing of NRZ pulse trains with the gaussian low pass filter. In this paper, we proposed the GMSK modulation system with the delta pulse trains. The proposed system constructed with the gaussian pulse generator triggered by the bipolar delta pulse, the differentiator between $+T_b/2$ and $-T_b/2$, and then a matched filter for frequency-modulation function. The spectrum of proposed system was found to be smaller than about 35[%] at 40[dB] attenuated bandwidth, and the center spectrum to be lower than the basic GMSK with zero-crossing property.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1004-1015
• /
• 1994

Modulation type classifier based on statistical moments has been successfully employed to classify PSK signals. Previously, the classifier developed utilizes the statistical moment of samples of the received signal phase, which may be difficult to extract from received signal. In this paper we propose a new moments-based classifier to classify PSK signals by using the moments of the demodulated signal for PSK. THe demodulated signal can be easily extracted from the conventional demodulation of PSK. The evaluation of the performance of the proposed classifier for PSK signals has been investigated in additive white Gaussian noise environment using the exact distribution of the demodulated signal. The performances of classifier in terms of probability of misclassification were evaluated. We found that the coherent system classifier gave 4dB improvement for BPSK and 3dB for QPSK over noncoherent system classifier, when the probability of misclassification is 10 and m equals to 4.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2021-2026
• /
• 2016

In this paper, a system model for transmission of 3-dimensional (3-D) signals is presented and its performance is analyzed. Unlike 2-D signals, no quadrature form expression for the 3-D signals is available. Exploiting a set of orthogonal basis functions, the 3-D signals are transmitted. As a result of computer simulation using very higher-level signal constellations, the 3-D transmission system has significantly improved error performance as compared with the 2-D system. It is considered that the principal reason for such performance improvement is much increased minimum Euclidean distance (MED) of the 3-D lattice constellations compared with the corresponding 2-D ones. When the MEDs of 2-D and 3-D lattice constellation are compared to confirm the analysis, the MED of 3-D 1024-ary constellation is around 2.6 times larger than that of the quadrature amplitude modulation (QAM). Expanding the constellation size to 4096, the MED of 3-D lattice constellation is increased by 3.2 times of the QAM.

• ETRI Journal
• /
• v.26 no.6
• /
• pp.565-574
• /
• 2004

Differential unitary space-time modulation (DUSTM) has emerged as a promising technique to obtain spatial diversity without intractable channel estimation. This paper presents a study of the application of DUSTM on multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) systems with frequency-selective fading channels. From the view of a correlation analysis between subcarriers of OFDM, we obtain the maximum achievable diversity of DUSTM on MIMO-OFDM systems. Moreover, an efficient implementation strategy based on subcarrier reconstruction is proposed, which transmits all the signals of one signal matrix in one OFDM transmission and performs differential processing between two adjacent OFDM blocks. The proposed method is capable of obtaining both spatial and multipath diversity while reducing the effect of time variation of channels to a minimum. The performance improvement is confirmed by simulation results.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.97-103
• /
• 2006

This work forcus on the development of gas sensor that measure the concentrations of exhaust gas using diode laser. Each diode laser for exhaust gas measurement is set to work at near-IR using both DA and WMS methods. Also use of fiber-coupled optical elements makes such a sensor rugged and easy to align. On-line data acquisition and processing can be performed with a PC running LabVIEW software, and absorption signals are measured simultaneously by multiplexing method. Finally, It were experimentally compared WMS (Wavelength Modulation Spectroscopy) with DA (Direct Absorption) for the accuracy.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.65-67
• /
• 2008

A new pulse width modulation method based on predictive current control strategy is proposed to modulate matrix converters. The predictive current controller utilizes a discrete-time model to predict the future values of output currents and generates proper duty-ratios ta minimize the output current errors. The proposed method uses continuous carrier and establishes a predictive current controller to predetermine duty ratio signal for directly generating gating signals an thus is named "predictive current control PWM(PCCPWM)". The modulation algorithm nd the required equations are derived by using average concept over one switching period. Thus it can be easily extended to other matrix converter topologies, especially with neutral connections, such as sing le-phase ad two-phase matrix converters. The feasibility and validity of the proposed strategy are verified by computer simulation and experimental results.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.787-797
• /
• 2013

Despite the advantages offered by multilevel inverters, one of the main drawbacks that prevents their widespread use is their circuit complexity as the number of power switches employed is usually high. This paper presents a new multilevel inverter topology with a considerable reduction in the number of power switches used through the switch-sharing approach. The fact that the proposed inverter applies two bidirectional power switches for sharing among the three phases does not prevent it from producing seven levels in the line-to-line output voltage waveforms. A modified scheme of space vector modulation via the application of virtual voltage vectors is developed to generate the PWM signals of the power switches. The performance of the proposed inverter is investigated through MATLAB/SIMULINK simulations and is practically tested using a laboratory prototype with a DSP-based modulator. The results demonstrate the satisfactory performance of the inverter and verify the effectiveness of the modulation method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.1
• /
• pp.12-18
• /
• 2014

In this paper, a new peak-to-average power ratio (PAPR) reduction method for spatial modulation(SM) is presented. By using the matrix with all non-zero elements to precode the signals before transmitting, the transmit power is scattered over all transmit antennas for achieving the goal of PAPR reduction. If this matrix is also an unitary matrix, the distribution of transmit power over transmit antennas will be uniform and it also could retain the characteristic of avoiding inter channel interference (ICI) due to the orthogonality of unitary matrix. In case of a non-ideal amplifier, the proposed method can produce a considerable improvement that increases with a number of transmit antennas in performance. Furthermore, the new scheme achieves an identical performance with conventional one in the case of ideal amplifier.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.826-829
• /
• 2006

A novel method for optical phase shaped binary transmission (PSBT) generation has been recently reported and experimentally evaluated. An amelioration of the optical signal-to-noise ratio (OSNR) sensitivity of the optical PSBT modulation format is proposed with the application of the concepts of enhanced electrical PSBT signal generation. Enhanced optical PSBT is proposed here as a modulation format producing a 0.7 dB gain in OSNR sensitivity compared to OPSBT, while maintaining a good robustness to group velocity dispersion: 100 ps/nm for enhanced optical PSBT and 120 ps/nm for optical PSBT, compared to 50 ps/nm for standard NRZ signals.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.3
• /
• pp.244-252
• /
• 1992

This paper describes a reactive power compensator using current-source delta modulation converter, which compensates the reactive power in the ac sides of 3-phase rectifier. In the conventional current control methods for the current-type reactive power compensators, it is usual to compare the reactive reference current signal with the triangular wave and hence to generate the ON-OFF signals for the reactive power compensator. To improve the response as well as the control capability, the delta modulated current control technique is used in this paper. As a result, the input power factor is improved close to unity and both simulation and experimental results show good compensating performances.