• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.353-356
• /
• 2011

전파를 수집하고 분석하는 신호수신시스템은 실 운용환경에서 검증되기 전에 정밀한 모의전파신호원을 이용한 정량적인 성능예측 및 실 환경과 유사한 모의전파환경에서 검증되어야한다. 신호수신 시스템은 전파의 주파수(Frequency), 펄스 변조(Pulse Modulation), 스캔 변조(Scan Modulation), 펄스 내 위상변조(Phase Modulation On Pulse), 펄스 내 주파수 변조(Frequency Modulation On Pulse) 등 다양한 신호특성에 대한 측정, 분석능력을 갖는다. 이러한 신호원들은 기본으로 실험실 환경에서 모의발생 되어야 하고 전파가 다수 존재하는 복잡한 전파환경 또한 모의되어야 한다. 본 논문에서는 효과적인 전파신호원의 모의발생, 운용시나리오에 따른 정밀고주파시험신호 모의방법에 관한 연구 결과를 서술한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.293-304
• /
• 2020

In this paper, various modulation techniques, including the legacy Global Navigation Satellite System (GNSS) signal modulation techniques, are introduced and the spectral characteristics and correlation characteristics of signals with various modulation techniques are analyzed based on numerical simulation. With the development of various GNSS services, the limited frequency band has become increasingly saturated, and issues of interoperability and compatibility have emerged in the new GNSS design. Since the efficient allocation of frequency resources is closely related to spectrum design, modulation techniques are one of the important signal design parameters of new signal design. Signal modulation techniques are closely related to various figure of merits (FoMs) as well as spectrum characteristic, and in some cases there is a complicated trade-off between FoMs. Thus, the FoMs associated with modulation technology should be analyzed and the best signal candidates should be chosen carefully via the trade-off analysis for FoMs. In this paper, we define the modulation technique based on Phase Shift Keying (PSK), Binary Offset Carrier (BOC) and Continuous Phase Modulation (CPM) for the design of KPS signals, and the FoMs of signals in terms of spectrum and correlation function are evaluated. Signals with various modulation techniques are implemented through a numerical simulation, and the relevant FoMs are analyzed.

• 대한전자공학회논문지
• /
• 제12권6호
• /
• pp.1-4
• /
• 1975

임팻다이오드의 임지던스크기가 연류에 교류를 중첩시켜 가할경우 변화하는 특성을 고찰하였다. 스펙트럼분석기상에서 반송파영점측정방법으로 견파수변조된 파의 특성을 측달하였다. 각파수변조는 아주 작은 교류신호전압으로 가능하며 변조주파수를 일정히하고 신호전압을 증가시키면 소요대역폭이 아주 커지고 신호전압을 일정히하고 변조각파수를 작게할때 대역건은 약간 좁아지는 결과를 얻었다. This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2163-2170
• /
• 2012

신호수신시스템은 수신신호의 주파수, 펄스변조, 스캔 변조, 펄스내 위상변조, 펄스내 주파수 변조 등 다양한 신호에 대한 측정 및 분석능력을 보유하여야 한다. 이러한 신호수신시스템의 성능을 평가하기 위하여 신호원들을 실험실 환경에서 효율적으로 모의발생하고 다수 전파가 존재하는 실제 운영환경과 유사한 복잡한 전파환경을 모의발생할 수 있는 효율적인 신호원 발생기를 제안한다. 제안한 모의전파신호원을 신호수신시스템 개발 전 과정에 걸쳐 활용할 경우 정확한 성능 검증 및 시험 비용을 절감할 수 있다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2008년도 추계학술대회
• /
• pp.181-184
• /
• 2008

The paper describes a Layered Modulation using the SVC signals and studies the properties of the modulation with respect to several parameters by the computer simulation. The SVC signals will include a base layer signal and an enhancement signal, and the base layer signal is the more important one in its channel robustness. The parameters will include a carrier frequency, a bandwidth, power level, modulation type and code rate. We analyze the demodulating and decoding process of the Layered Modulation system through several scatter plots. And then we discuss the affect of the layer signal power difference to the BER performance, which also proves the base layer signal is more important than the enhancement layer signal.

• 한국통신학회논문지
• /
• 제39A권6호
• /
• pp.303-309
• /
• 2014

보안성을 향상시킬 수 있는 시스템인 카오스 통신 시스템은 신호의 비예측성, 비주기성, 광대역성, 구현의 용이성 등의 특징을 가지며, 초기조건에 굉장히 민감한 특징을 가진다. 이런 특징들로 인해서 카오스 통신 시스템의 보안성은 디지털 통신 시스템보다 우수하다. COOK 변조 방식은 비동기식 수신기를 사용하면서도 다른 카오스 변조 방식보다 BER 성능이 우수하게 평가된다. 하지만 COOK 변조 신호는 정보 비트의 예측이 쉽기 때문에 보안성과 신호의 안전성 측면에서는 다른 카오스 변조 방식보다 나쁘게 평가된다. 따라서 본 논문에서, 우리는 COOK 변조 방식의 보안성과 신호의 안전성을 향상시키기 위해 스크램블링 기법을 응용하여 새로운 스크램블링 COOK 변조 방식을 제안한다. 기존 COOK 변조 방식은 데이터가 1인 경우에만 카오스 신호를 발생시키기 때문에 데이터 예측이 가능하지만, 스크램블링 COOK 변조 방식은 발생된 카오스 신호가 0일 수도 있으며 1일 수도 있기 때문에 예측이 불가능하다. 따라서 스크램블링 COOK 변조 방식은 기존 COOK 변조 방식보다 전송 신호의 보안성과 안전성을 향상시킬 수 있다.

• 센서학회지
• /
• 제16권5호
• /
• pp.342-348
• /
• 2007

A high-speed signal processor for Fabry-Perot interferometric sensors using modified ramp modulation is implemented. The main idea for the signal processing is to find a modulation waveform that could induce a linear frequency change in a laser diode to linearize the relationship between the optical phase shift and measurand. It is found that the waveform could be modeled as the addition of a linear term and an exponential term. A signal processor adopting modified ramp modulation technique is implemented and evaluated to find linearity, drift and random walk of $<{\pm}1.5%$, $0.4^{\circ}C$, $5.28{\times}10^{-4}^{\circ}C/{\sqrt{Hz}}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.71-74
• /
• 2003

The signal processing algorithm for a PSD(Position Sensitive Detector) using amplitude modulation/demodulation is addressed in this paper. Dark currents and external noises such as daylight and fluorescent lights are eliminated by using amplitude modulation/demodulation and a low pass filter. The proposed amplitude modulation/demodulation method for a PSD sensor is compared with pulse amplitude modulation method. The proposed amplitude modulation is proved to be more accurate and robust than PAM method by analysis and experiments. Multiple measurements using one PSD sensor by amplitude modulation/demodulation is also addressed. The Power variation of light source is compensated by normalization process using a divider.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권12호
• /
• pp.4664-4681
• /
• 2020

Modulation recognition (MR) plays a key role in cognitive radar, cognitive radio, and some other civilian and military fields. While existing methods can identify the signal modulation type by extracting the signal characteristics, the quality of feature extraction has a serious impact on the recognition results. In this paper, an end-to-end MR method based on long short-term memory (LSTM) and the gated recurrent unit (GRU) is put forward, which can directly predict the modulation type from a sampled signal. Additionally, the sliding window method is applied to fast-changing mixed-modulation signals for which the signal modulation type changes over time. The recognition accuracy on training datasets in different SNR ranges and the proportion of each modulation method in misclassified samples are analyzed, and it is found to be reasonable to select the evenly-distributed and full range of SNR data as the training data. With the improvement of the SNR, the recognition accuracy increases rapidly. When the length of the training dataset increases, the neural network recognition effect is better. The loss function value of the neural network decreases with the increase of the training dataset length, and then tends to be stable. Moreover, when the fast-changing period is less than 20ms, the error rate is as high as 50%. As the fast-changing period is increased to 30ms, the error rates of the GRU and LSTM neural networks are less than 5%.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.