• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.59-63
• /
• 2005

We propose non-DC-free generalized PRML (GPRML) that are suppressed DC contents for matching to the response of perpendicular magnetic recording channel with a ring-head. In addition, DC-free encoding is considered to prevent low-frequency disturbances. The SNR performance is obtained by combining the various PRML channels with DC-free and non-DC-free codes during the normalized recording density increases from 2.5 to 3.5. The GPRML detections without using DC-free code get SNR gains more than 1dB compared to the conventional PRML systems at 10/sup -5/BER. We confirmed that the rate 127/136 DC-free coded GPRML systems show good performances compared with the 16/17 non-DC-free coded GPRML systems. In results, DC-free coded GPRML detections get gains about 1.4dB and 2.0dB at the density of 3.3 and 3.5, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.268-273
• /
• 2015

Recently many countries are researching actively underwater sensor networks for securing ocean resources and changes of ocean environment in all over the world. Current the commercial modem are not suitable because it has characteristics of long distance, higher price, larger power consumption with the special object mainly. In this paper, a low power and compact underwater communication modem which is suitable for underwater sensor networks is implemented. It is comprised by using a simple analog circuit for non-coherent BFSK modulation method, ultra low power MCU and orthogonal codes with a less operation and a simple implementation. It was experimented an underwater communication using our modem in a water tank and open sea farms. It communicates fewer than $10^{-4}$ bit error rate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.246-252
• /
• 2018

Recent studies have been received much attention on underwater laser communication, which is capable of high data rate. However, in underwater laser communication, distortions caused by absorption and scattering induced performance degradation. A typical way to improve performance is to apply channel coding technique. In the beginning of studies, simple methods such as RS and BCH coding techniques were applied. However, due to distance expansion and performance improvement, channel coding methods with low error probability such as LDPC coded method were applied. In this paper, we analyzed the performance according to the size of the code word N, the distance between the transceivers and the size of the M of the M-ary PPM modulation scheme. Simulation results show that parameter M of M-ary PPM is most effect on performance.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.21-25
• /
• 2013

The dual-stream based stereoscopic 3D HDTV broadcasting service was launched recently. Although the dual-stream based HDTV service has been successfully provided, the 3D HDTV broadcasting system requires more bandwidth efficient transmission schemes because it should convey both left and right HD resolution images simultaneously in the finite 6MHz bandwidth. In this paper, we consider more advanced ATSC transmission schemes that use higher modulation such as 16-QAM and concatenated RS code and block LDPC codes. Compared with conventional ATSC system and the modified ATSC system in [2], the proposed system has about 2.97dB and 1.12dB SNR gain at the payload data rate of 19.44Mbps compared with the existing ATSC system and the modified ATSC system [2]. Also, the proposed scheme requires only 1.05dB power increase for the 3D HDTV service, which is reasonable SNR increase value and applicable to the advanced 3D high definition broadcasting realization in limited 6MHz bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.872-877
• /
• 2011

In this paper, the new decoding algorithm of Block Turbo Codes using Channel State Information(CSI), which is estimated to compensate for the distorted signal caused by multi-path fading, is proposed in order to improve error correction capacity during decoding procedure in OFDM system. The performance of the new decoding algorithm is compared to that of the conventional decoding algorithm without using channel state information under the Rayleigh fading channel. Experimental results showed that in case of only one iteration coding gains of up to 5.0dB~9.0dB can be obtained by applying the channel state information to the conventional decoding algorithm according to the modulation methods. In addition to that, the new decoding algorithm using channel state information at only one iteration shows a performance improvement of 3.5dB to 5.0dB when compared to the conventional decoding algorithm after four iterations. This leads to reduce the considerable amount of computation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.646-652
• /
• 2013

EU's Galileo project is a market-based GNSS (Global Navigation Satellite System) that is under development. It is expected that Galileo will provide the positioning services based on new technologies in 2020s. Because Galileo E1 signal for OS (Open Service) shares the same center frequency with GPS L1 C/A signal, CBOC (Composite Binary Offset Carrier) modulation scheme is used in the E1 signal to guarantee interoperability between two systems. With E1 signal consisting of a data channel and a pilot channel at the same frequency band, there exist several options in designing signal acquisition for Assisted-Galileo receivers. Furthermore, compared to SNR worksheet of Assisted-GPS, some factors should be examined in Assisted-Galileo due to different correlation profile and code length of E1 signal. This paper presents SNR worksheets of Galileo E1 signals in E1-B and E1-C channel. Three implementation losses that are quite different from GPS are mainly analyzed in establishing SNR worksheets. In the worksheet, hybrid long integration of 1.5s is considered to acquire weak signal less than -150dBm. Simulation results show that the final SNR of E1-B signal with -150dBm is 19.4dB and that of E1-C signal is 25.2dB. Comparison of relative computation shows that E1-B channel is more profitable to acquire the strongest signal in weak signal environment. With information from the first satellite signal acquisition, fast acquisition of the weak signal around -155dBm can be performed with E1-C signal in the subsequent satellites.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.147-154
• /
• 2015

Satellite broadcasting networks, like if you have if you have just received information that everyone must bring the required security attributes this earth should be done as encryption. In this paper, a satellite communication network AH additional security header in transport mode IPsec VPN by applying the SHA-256 and MD-5 authentication algorithm to authenticate the data portion Error rate and analyze the BER and Throughput. First, to generate a normal IP packet added to IPsec transport mode security header AH were constructed internal authentication data by applying the SHA-256 and MD-5 algorithm. Channel coder was applied to the Rate Compatible Punctured Turbo Codes, packet retransmission scheme Hybrid-ARQ Type-II and Type-III were used. Modulation method was applied to the BPSK, the wireless channel Markov channel (Rician 80%, Rayleigh 20% and Rician 90%, Rayleigh 10%) as an authentication algorithm according to the satellite channel state analyzed how they affect the error rate and Throughput.

• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.307-315
• /
• 2014

A new modified lossless intra-coding method based on a cross residual transform is applied to HEVC(High Efficiency Video Coding). The HEVC standard including a multi-directional spatial prediction method to reduce spatial redundancy encodes the pixels in a PU (Prediction Unit) by using neighboring pixels. In the new modified lossless intra-coding method, the spatial prediction is performed by pixel-based DPCM but is implemented by block-based manner by using cross residual transform on the HEVC standard. The experimental results show that the new lossless intra-coding method reduces the bit rate of approximately 8.4% in comparison with the lossless-intra coding method in the HEVC standard and the proposed method results in slightly better compression ratio than the JPEG2000 lossless coding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1462-1470
• /
• 1999

In this paper, the performance of packet radio networks using the ALOHA protocol in Rayleigh fading channels is analyzed in terms of the capture probability and the throughput. We consider capture effect in order to increase the probability of the channel access and to include cellular environment we assume that the traffic is a truncated bell-shaped distribution. The packet proposed in this paper consists of a competition part and a data part to decrease the probability of collision in the channel access. In the competition part, DS system with common spreading code is used and in the data, hybrid DS/FH system is used. We consider the linear correlation receiver and the hard-limiting correlation receiver as the receiver model. BPSK modulation is also employed. Because hybrid DS/FH systems are not sensitive to variation of the interference power, as we choose a proper chip number N and a frequency hopping number q, we can obtain a steady system performance even though the variation of interference power is severe fading channels such as Rayleigh fading.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.2
• /
• pp.106-112
• /
• 2017

In the paper, we propose a levitation and a propulsion controller for the magnetic levitation logistic transportation system. The levitation controller is designed considering the mutual influence of the electromagnets to minimize roll and pitch movements. In order to solve the structural disadvantages of the magnetic levitation transportation system, we improve the problem of the existing controller by applying the exponential filter to the reference input. DSP-based control hardware is developed and the levitation control method is verified by levitation experiments to the air gap goal. The propulsion controller uses the space vector voltage modulation method. The propulsion controller is designed to follow the position and velocity profile by detecting the absolute position from the bar code information attached to the rail. The position control result shows satisfactory performance through the propulsion control reciprocating motion experiment.