• Journal of Preventive Medicine and Public Health
• /
• v.48 no.5
• /
• pp.249-256
• /
• 2015

Objectives: Epidemiological studies have reported that vitamin D deficiency is associated with inflammatory disease. Smoking is a well-known risk factor for inflammation. However, few studies have investigated the interactive effect of vitamin D deficiency and smoking on inflammation. This study aims to investigate the interaction of vitamin D and smoking with inflammatory markers in the urban elderly. Methods: We used data from the Korean Elderly Environmental Panel Study, which began in August 2008 and ended in August 2010, and included 560 Koreans ${\geq}60$ years old living in Seoul. Data was collected via questionnaires that included items about smoking status at the first visit. Vitamin D levels, high-sensitivity C-reactive protein (hs-CRP), and white blood cell (WBC) counts were repeatedly measured up to three times. Results: The association of vitamin D and hs-CRP was significant after adjusting for known confounders (${\beta}=-0.080$, p=0.041). After separate analysis by smoking status, the association of vitamin D deficiency and hs-CRP in smokers was stronger than that in nonsmokers (smokers: ${\beta}=-0.375$, p=0.013; non-smokers: ${\beta}=-0.060$, p=0.150). Smoking status was an effect modifier that changed the association between vitamin D deficiency and hs-CRP (interaction estimate: ${\beta}=-0.254$, p=0.032). Vitamin D was not significantly associated with WBC count (${\beta}=0.003$, p=0.805). Conclusions: Vitamin D deficiency was associated with hs-CRP in the urban elderly. Smoking status was an effect modifier of this association. Vitamin D deficiency was not significantly associated with WBC count.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.403-409
• /
• 1997

The equilibrium constants of five deoxyribonucleosides (dDyd, dUrd, dGuo, dThd, dAdo) were estimated by the plate theory and the moment method under isocratic conditions of the Reversed-Phase High Performance Liquid Chromatography (RP-HPLC). The mobile phase in this system was composed of water and organic modifiers(acetonitrile and methanol) The plate theory of linear adsorption isotherm was treated on the basis of continuous flow of eluent through the plates of the column. The moment method was utilized to find the equilibrium constant from the first absolute moment of experimental data. The equilibrium constants of five deoxyribonucleosides in the two methods were very close, and also the equilibrium constants calculated by capacity factor were similar to those by both the plate theory and the moment method. The equilibrium constant was expressed as a semi-log function of the quantity of organic modifier. Excellent agreements between the calculated elusion profile by the plate theory and the experimental data were observed.

• Journal of Life Science
• /
• v.13 no.5
• /
• pp.569-575
• /
• 2003

Supercritical $CO_2$ extraction was applied to extraction of the valuable compound for benign prostatic hyperplasia from saw palmitto. Three levels of parameters, temperature $(35^{\circ}C,\; 60^<\circ}C)$, pressure 22∼30 Mpa and ethanol modified solvent concentration, were used as the independent variables of central composite to rotate the design. The extracting pressure and temperature interaction was significantly affected the extraction of valuable compounds. The ethanol was an efficient modifier to extract valuable compound by supercritical carbon dioxide. The optimal processing conditions were extracting pressure, 30 Mpa, extracting temperature, $60^<\circ}C$, ethanol modifier, 15% for extracts of the valuable compounds from saw palmitto. In conclusion, it was found that supercritical $CO_2$ extraction can successfully be applied to extract high quality extracts from saw palmitto.

• Advances in concrete construction
• /
• v.9 no.4
• /
• pp.387-395
• /
• 2020

This study has been carried out in two-phases to develop Fiber Reinforced Self-Compacting Concrete (FRSCC) performance. In the first phase, the composition of the quaternary composite binder compromised CEM I 42.5N (58-70%), Rice Husk Ash (25-37%), quartz sand (2.5-7.5%) and limestone crushing waste (2.5-7.5%) were optimized. And in the second phase, the effect of two fiber types (steel brass-plated and basalt) was investigated on the SCC optimized with the optimum CB as disperse reinforcement at 6 different ratios of 1, 1.2, 1.4, 1.6, 1.8, and 2.0% by weight of mix for each type. In this study, the theoretical principles of the synthesis of self-compacting dispersion-reinforced concrete have been developed which consists of optimizing structure-formation processes through the use of a mineral modifier, together with ground crushed cement in a vario-planetary mill to a specific surface area of 550 m2 / kg. The amorphous silica in the modifier composition intensifies the binding of calcium hydroxide formed during the hydration of C3S, helps reduce the basicity of the cement-composite, while reducing the growth of portlandite crystals. Limestone particles contribute to the formation of calcium hydrocarbonate and, together with fine ground quartz sand; act as microfiller, clogging the pores of the cement. Furthermore, the results revealed that the effect of fiber addition improves the mechanical properties of FRSCC. It was found that the steel fiber performed better than basalt fiber on tensile strength and modulus of elasticity; however, both fibers have the same performance on the first crack strength and sample destruction of FRSCC. It also illustrates that there will be an optimum percentage of fiber addition.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.347-351
• /
• 2003

The extraction of glycyrrhizic acid from licorice using supercritical carbon dioxide (SCCO$_2$) was investigated with respect to the effects of extraction parameters such as the kind and amount of modifier, temperature, pressure, and extraction time. The conventional organic solvent extraction was also conducted for a quantitative comparison. The content of glycyrrhizic acid in crude extracts was analyzed by HPLC and the yield of glycyrrhizic acid was computed as a weight percent recovery. The optimal pressure and temperature for SCCO$_2$ extraction were found to be 40 MPa and 80$^{\circ}C$, respectively, when SCCO$_2$ was modified with 70% aqueous ethanol. Under the same pressure and temperature, the highest recovery was attained to be 104.57% in the first 60 min when the concentration of 60%, aqueous ethanol in SCCO$_2$ was 15%.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.37-44
• /
• 1983

Thermoplastic aceton-formaldehyde resin adhesive was added as a modifier for urea-formaldehyde resin adhesive and its effects on plywood smear strength and wood failure were investigated. The results are summarized as follows: 1) The plywood shear strength and wood failure showed the highest values at $120^{\circ}C$ of hot plate temperature, but the values decreased according to the rise of addition ratio of aceton resin. 2) The variation of molar ratio of aceton resin had no effect on plywood shear strength and wood failure. 3) The plywood bonded by the addition of aceton resin showed lower values than those of urea resin bonding plywoods in shear strength and wood failure. Therefore, aceton resin was inadequate as a modifier of urea resin adhesive.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.101-113
• /
• 2006

Generally, asphalt binder modifier increases the viscosity at high temperature as well as at mixing and paving temperature, so that higher temperature is required to produce the hot-mix asphalt. Otherwise, wax is able to improve workability by means of decreasing the viscosity of asphalt binder. In this study, the effect of PE wax used to modify the asphalt binder was evaluated in laboratory. The properties of PE wax modified binder were compared with those of SBS and Crumb Rubber Modified binders. The results showed that wax type I has an effect on strengthening rut resistance as well as improving workability. However, wax type I weaken crack resistance due to making binder harder at intermediate temperature. The results also showed that wax type II has an effect on improving workability and on strengthening crack resistance due to making binder softer.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.215-222
• /
• 1994

As a toughness modifier for plastics chlorosulfonated polyethylene(CSM) can be used. CSM has a good resistance to oxygen and ozone. CSM has a crosslinkable functional group(sulfonyl chorid) with sulfur and metal oxide. Polyvinylchloride(PVC) is widely used industrial plastics because of its balanced properties and low cost. But it has some disadvantages such as low impact strength, light, ozone and oxygen degradation. In order to improve these properties of PVC, CSM was blended with PVC. The toughening effect appeared at about 10wt% and there is no additional effect above 30wt% of CSM. The weatherability, ozone resistance and mechanical properties of PVC were improved by blending with CSM. The toughening mechanism is studied by SEM.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.669-680
• /
• 1994

DMA-co-DAMA were synthesized from 2-diethylaminoethyl metacrylate and dodecyl-metacrylate containing long chain hydrocarbon group with hydrophilic and hydrophobic radicals. To facilitate water emulsification,acrylic copolymer was cationized by acetic acid to produce acetated acrylic copolymer. The structures of the synthesized copolymer and acetated copolymers were confirmed by IR, NMR, and molecular weight was measured by GPC, and C. H. N elemental analysis. Acetated acrylic copolymers were perfectly emulsified in water and showed increased emulsion stability. Polymer dispersion for cement modifier(PDCM-PDD) was prepared by blending of the guaternized acrylic copolymer synthesized above sodium silicate sodium gluconate oleic acid and triethanol amine. The result with prepared polymer dispersion of cement modfier was examined, and it was found that excellent waterproffing effect; Water permeability ratio is 0.44 under the water pressure of $100g/cm^2$ and 0.55 under $3kg/cm^2$, and water absorption ratio is 0.36~0.47 and 1.02 compressive strength ratio at mixed ratio of water/PDCM-PDD is 45 times.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.88-97
• /
• 2002

The effect of aminosiloxane modifier on the chemorheological properties of ortho-cresol novolac epoxy/phenol novelac/triphnylphosphine resin system was investigated aat different isothermal curing temperatures. By adding the aminosiloxane to the resin system, not only conversion rate and conversion were increased but also glass transition temperature was promoted. Critical conversion and gelation time obtained at the crossover point between storage and loss moduli were reduced and thus the viscosity was increased by the aminosiloxane. $C_1$ and $C_2$ in the WLF equation calculated from the glass transition temperature as a function of conversion and measured viscosity were found to vary with the curing temperature. By applying the change of glass transition temperature with conversion, $C_1$ and $C_2$ to WLF equation, it was possible to predict accurately the viscosity change with isothermal curing reaction.