• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.725-732
• /
• 2012

This study was carried out to investigate the effects of hydrated potato starch on the quality of low-fat ttoekgalbi (Korean traditional patty) packaged in modified atmosphere conditions during storage. The ttoekgalbi was prepared from 53.2% lean beef, 13.9% lean pork, 9.3% pork fat, and 23.6% other ingredients. Two low-fat ttoekgalbi treatments were prepared by substituting pork fat with hydrated potato starch; either by 50% fat replacement (50% FR) or 100% fat replacement (100% FR). Both 50% and 100% FR increased the moisture, crude protein, and decreased fat content, cooking loss, and hardness. For MAP studies, 200 g of ttoekgalbi were placed on the tray and filled with gas composed of 70% $O_2$: 30% $CO_2$ (70% $O_2$-MAP) and 30% $CO_2$: 70% $N_2$ (70% $N_2$-MAP), and were stored at $5^{\circ}C$ for 12 d. During the storage time, both 50% and 100% FR showed higher protein deterioration, while no differences were found in CIE $a^*$, CIE $L^*$, lipid oxidation, and bacterial counts in comparison to control. The ttoekgalbi with 70% $O_2$-MAP was more red, lighter in color, and showed higher TBARS values compared with 70% $N_2$-MAP. The meat with 70% $N_2$-MAP showed lower aerobic bacterial counts in control than those with 70% $O_2$-MAP. The lower anaerobic bacterial counts were observed only in 50% FR and 100% FR packed with 70% $N_2$-MAP in comparison with 70% $O_2$-MAP. In conclusion, the fat replacement with hydrated potato starch showed no negative effects on the quality of low fat ttoekgalbi during storage and 70% $N_2$-MAP was better than 70% $O_2$-MAP for low-fat ttoekgalbi packaging.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.365-374
• /
• 2021

In this study, the effect of enzyme-modified starch used in the preparation of filled hydrogel powder loaded with curcumin (FHP) on redispersibility, thermal and UV stability, and curcumin retention during in vitro digestion was investigated. FHP maintained stability without layer separation when redispersed and showed more stability against UVB than the emulsion powder (EMP). There was no significant difference in the chemical stability of curcumin between rice starch-based filled hydrogel powder (RS-FHP) and enzyme-modified starch-based filled hydrogel powder (GS-FHP). However, the gel matrix of GS-FHP maintained greater stability of lipid droplets in the stomach compared to RS-FHP, thereby improving the retention rate of curcumin after in vitro digestion. GS-FHP could be used as a novel material for developing premixes that require stable formulation and maintenance of functional substances, as it can increase the dispersion stability and retention rate of functional substances after digestion.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.147-153
• /
• 2000

We could produce algin-like biomaterial of polyiduronan using polyglucuronic acid C5-epimerase with polyglucuronic acid prepared by specific oxidation of primary alcohol groups of four kinds of polysaccharides(corn starch, rice starch, sweet potato starch, and cellulose). The enzyme activity was determined by the modified Dische carbazole methodology with the isolated crude enzyme from the supernatant centrifuged at $100,000{\times}g$ for 1 hr after grinding fresh bovine liver. And then, the optimal substrate, pH, and temperature for the enzyme reaction of polyglucuronic acid C5-epimerase were determined as the oxidized sweet potato starch, 7.0, and $30^{\circ}C$, respectively. Conclusively, it could be possible to epimerize polyglucuronic acid in the oxidized sweet potato starch to polyiduronic acid. Therefore, we could obtain algin-like polysaccharide using the oxidized sweet potato starch and polyglucuronic acid C5-epimerase isolated from bovine liver.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2001.06a
• /
• pp.40-45
• /
• 2001

Raw starch-digesting amylase (BF-2A, M.W. 93, 000 Da) from Bacillus circulans F-2 was converted to two components during digestion with subtilisin. Two components were separated and designated as BF-2A' (63, 000 Da) and BF-2B (30, 000 Da), respectively. BF-2A' exhibited the same hydrolysis curve for soluble starch as the original amylase (BF-2A). Moreover, the catalytic activities of original and modified enzymes were indistinguishable in $K_{m}$, Vmax for, and in their specific activity for soluble starch hydrolysis. However, its adsorbability and digestibility on raw starch was greatly decreased. Furthermore, the enzymatic action pattern on soluble starch was greatly different from that of the BF-2A. A smaller peptide (BF-2B) showed adsorb ability onto raw starch. By these results, it is suggested that the larger peptide (BF-2A') has a region responsible for the expression of the enzyme activity to hydrolyze soluble substrate, and the smaller peptide (BF-2B) plays a role on raw starch adsorption. A similar phenomenon is observed during limited proteinase K, thermolysin, and endopeptidase Glu-C proteolysis of the enzyme. Fragments resulting from proteolysis were characterized by immunoblotting with anti-RSDA. The proteolytic patterns resulting from proteinase K and subtilisin were the same, producing 63- and 30-kDa fragments. Similar patterns were obtained with endopeptidase Glu-C or thermolysin. All proteolytic digests contained a common, major 63-kDa fragment. Inactivation of RSDA activity results from splitting off the C-terminal domain. Hence, it seems probable that the protease sensitive locus is in a hinge region susceptible to cleavage. Extracellular enzymes immunoreactive toward anti-RSDA were detected through whole bacterial cultivation. Proteins of sizes 93-, 75-, 63-, 55-, 38-, and 31-kDa were immunologically identical to RSDA. Of these, the 75-kDa and 63-kDa proteins correspond to the major products of proteolysis with Glu-C and thermolysin. These results postulated that enzyme heterogeneity of the raw starch-hydrolysis system might arise from the endogeneous proteolytic activity of the bacterium. Truncated forms of rsda, in which the gene sequence encoding the conserved domain had been deleted, directed the synthesis of a functional amylase that did not bind to raw starch. This indicates that the conserved region of RSDA constitutes a raw starch-binding domain, which is distinct from the active centre. The possible role of this substrate-binding region is discussed.d.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.568-573
• /
• 2004

Effects of dry heating and pH on pasting, thermal, and textural properties of corn starch containing soy protein isolate (SPI) were investigated. Samples were prepared by drying corn starch dispersions containing 3% SPI at $40^{\circ}C$ (unheated sample) or additionally heating dried mixtures at $130^{\circ}C$ (heated sample). Pasting properties of starch samples and textural properties of starch gels were measured using Rapid Visco-Analyzer (RVA) and Texture Analyzer (TA), respectively. Effects of SPI addition and dry heating on retrogradation and microstructure of gel samples were investigated using DSC and SEM, respectively. Pasting viscosity of dry-heated samples was significantly higher than that of unheated samples, and at pH 8 compared to pH 6. Dry-heat treatment decreased fracture stress and strain of starch gels containing SPI. No significant effects of dry-heat treatment and pH were observed on retrogradation of starch gels. Addition of SPI retarded starch retrogradation and modified starch gel properties with increased nutritional value. Dry-heat treatment with SPI could be possible method for starch modification.

• The Korean Journal of Mycology
• /
• v.15 no.3
• /
• pp.158-168
• /
• 1987

Several species of the fungi were isolated from cassava(Manihot esculenta Gruntz) starch which had formed into pellet, those had been stored for a while in southern part of Thailand. The species of Rhizopus, Aspergillus niger, and Aspergillus fumigatus were identified. The experimental results are as follows; Dry weight increases were checked during the static liquid culture with modified Czapek Dox medium to which cassava starch was partly replaced to sugar, Aspergillus niger and Aspergillus fumigatus had grown more than Rizopus species when 6% cassava starch was replaced to sugar and had been cultured for 72 hours. Amounts of mycelial protein of Aspergillus niger were checked, the highest amount was shown in 6% cassava starch involved medium. When nitrogen sources were varied such as ammonium sulfate or urea against sodium nitrate, there was no significant difference in mycelial production. Alpha amylase activity of each fungus isolated here was checked, those of Aspergillus niger have shown the highest peak at 72 hours.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.613-617
• /
• 1988

This study was undertaken to observe the effects of partial replacement of acorn starch with dent, cross-linked, or acid modified corn starches, and of refrigeration on sensory characteristics of acorn mooks(starch gels). Triangle test was used to determine if there were noticeable differences among the monks. In order to find the source of differences, various sensory properties of the monks were evaluated with quantitative descriptive analysis on unstructured scale. The results indicated that added corn starches affected significantly most of the sensory characteristics evaluated. Control acorn monks had greater intensities in color, clarity, bend property, firmness and cohesiveness. Monks containing cross-liked corn starch were more similar to control than the other mixed starch monks, fresh or refrigerated.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.175-180
• /
• 2018

Solution-styrene-butadiene rubber (SSBR) composites were manufactured using four kinds of fillers: silica-silane coated carbon black (SC-CB) hybrid, starch-SC-CB hybrid, pure silica, and pure starch. The influence of filler type on the mechanical properties of the rubber matrix was studied in this work. SC-CB was prepared by silane-graft-coating using vinyl triethoxy silane and carbon black, which enhanced the dispersion effect between the rubber matrix and the filler, and improved the mechanical properties of the compounds. The morphology of the composites was observed by field-emission scanning electron microscopy (FE-SEM). The thermal decomposition behavior of the composites was determined by thermogravimetric analysis (TGA), and the crosslinking behavior of the composites was tested using a rubber process analyzer (RPA). The hardness, tensile strength, swelling ratio, and gas transmittance rate of the composites were evaluated according to ASTM. The test results revealed that with the addition of SC-CB, the hybrid fillers, especially those blended with silica, showed a better reinforcement effect, the highest hardness and tensile strength, and stable thermal decomposition behavior. This implies that the silica-SC-CB hybrid filler has a notable mechanical reinforcement effect on the SSBR matrix. Because of self-crosslinking during its synthesis, the starch-SC-CB hybrid filler produced the most dense matrix, which improved the anti-gas transmittance property. The composites with the hybrid fillers had better anti-swelling properties as compared to the neat SSBR composite, which was due to the hydrophilicity of silica and starch.

• Microbiology and Biotechnology Letters
• /
• v.47 no.3
• /
• pp.412-422
• /
• 2019

The present study reports the morphological and molecular characterization of the fungal strain, CMSS06 and evaluates its raw starch hydrolyzing ability in four different agricultural substrates (rice bran, banana peel, cassava tubers, and coconut water). The potential use of each agricultural substrate to replace the expensive fermentation media was evaluated with six different fermentation media: rice bran (RB), banana peel (BP), cassava starch (CS), cassava in coconut water (CSCW), cassava in modified coconut water (CMCW), and pure Coconut water (CW). The fungal strain CMSS06 was identified as Thielaviopsis ethacetica by the analysis of the ITS sequences. The T. ethacetica alpha amylase enzyme exhibited maximum alpha amylase activity at 72 h, pH 7.0, and $40^{\circ}C$ on soluble starch. This species resulted in the highest enzyme activity (mU/ml) of 26.06, 10.89, 58.82, 14.2, and 54.67 with the RB, BP, CS, CSCW, and CMCW fermentation media, respectively. The results indicate that CS can be used as a carbon substrate and CMCW can be used to accelerate the fermentation by T. ethacetica. The enzyme was partially purified by 40-60% ammonium sulphate fraction, and it showed total enzyme activity, total protein content, specific activity, purification fold, and a recovery of 2400 mU, 30 mg, 80 mU/mg, 2.7, and 71.1%, respectively. The molecular mass of the T. ethacetica alpha amylase was estimated on SDS-PAGE, and two bands around 50 kDa and 70 kDa were identified. The present study implies that T. ethacetica can produce alpha amylase, and it can be used to hydrolyze raw starch during the fermentation processes.

• YAKHAK HOEJI
• /
• v.59 no.2
• /
• pp.70-76
• /
• 2015

A Softgel is an oral dosage form for medicine similar to capsules and softgel dosage form offers several advantages over other oral dosage forms, such as delivering a liquid matrix designed to solubilize and improve the oral bioavailability of a poorly soluble compound as a unit dose solid dosage form, delivering low and ultra-low doses of a compound. This study aimed to qualify a proprietary vegetable soft capsule which contains modified starch and carrageenan as capsule shell components compare to the conventional gelatin softgel. Four kinds of samples were prepared with vegetable and gelatin capsule shell, respectively. Morphology of capsule shell, mechanical strength of capsule, and hygroscopic properties were studied for comparing the quality attributes of softgel. Short-term stability against heat and moisture was also investigated in this study. Vegetable capsule shell showed better mechanical strength, physical stability and disintegration time for temperature and humidity than those of conventional gelatin capsule shell with four different filling materials used frequently as soft capsule form. Conclusively, this vegetable capsule shell polymer system can replace easily gelatin-shell systems and additionally allows encapsulation of lipid fills at high temperatures that are semisolid or solid-like at room temperature.