• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.204-217
• /
• 2016

Modified poplar has emerged as a potential raw material for furniture production. Lack of specific modified poplar strength information; however, restricts applications in the furniture industry especially as related to strength in corner-joints. Optimization of strength in L-shaped corner dowel modified poplar joints under compression loads utilizing finite element analysis (FEA) by Taguchi method with the focus of this study. Four experiment factors (i.e., Structure Style, Tenon Length, Tenon Diameter, and Tenon Gap), each at three levels, were conducted by adopting a $L_9-3^4$ Taguchi orthodoxy array (OA) to determine the optimal combination of factors and levels for the von Mises stress utilizing ANSYS software. Results of Signal-to-Noise ratio (S/N) analysis and the analysis of variance (ANOVA) revealed the optimal L-shaped corner dowel joint in modified poplar is $45^{\circ}$ Bevel Butt in structure style, 24 mm in tenon length, 6 mm in tenon diameter, and 20 mm in tenon gap. Tenon length and tenon gap are determined to be significant design factors for affecting von Mises Stress. Confirmation tests with optimal levels and experimental test indicated the predicted optimal condition is comparable to the actual experimental optimal condition.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.

• Journal of Plant Biotechnology
• /
• v.38 no.3
• /
• pp.228-233
• /
• 2011

Nucleoside diphosphate kinase 2 (NDPK2) is known to regulate the expression of antioxidant genes and auxin-responsive genes in plants. Previously, it was noted that the overexpression of Arabidopsis NDPK2 (AtNDPK2) under the control of an oxidative stress-inducible SWPA2 promoter in transgenic poplar (Populus alba ${\times}$ P. tremular var. glandulosa) plants (referred to as SN plants) enhanced tolerance to oxidative stress and improved growth (Plant Biotechnol J 9: 34-347, 2011). In this study, growth of transgenic poplar was assessed under living modified organism (LMO) field conditions in terms of biomass in the next year. The growth of transgenic poplar plants increased in comparison with non-transgenic plants. The SN3 and SN4 transgenic lines had 1.6 and 1.2 times higher dry weight in stems than non-transgenic plants at 6 months after planting, respectively. Transgenic poplar also exhibited increased transcript levels of auxin-response genes such as IAA1, IAA2, IAA5 and IAA6. These results suggest that enhanced AtNDPK2 expression increases plant biomass in transgenic poplar through the regulation of auxin-response genes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.520-520
• /
• 2009

Organic by-products derived from cellulose and lignin during organosolv pretreatments of yellow poplar wood (Liriodendron tulipifera) in the presence of $H_2SO_4$ and NaOH as catalysts, respectively, were subjected to various analyses to elucidate their effects on further performance of biological ethanol fermentation and provide preliminary data for the structure and utilization of organosolv lignin. Monomeric sugars amounted to ca. 2.2-7.7% in the organosoluble fraction of the organosolv pretreatment with $H_2SO_4$, while significantly low amount of sugars (0.2-0.3%) were determined in that of the organosolv pretreatment with NaOH. In case of addition of $H_2SO_4$ during organosolv pretreatment of biomass, a fermentation of the organosoluble fraction could be considered as an essential process to increase an efficiency of biomass utilization as well as yield of bioethanol. Precipitates, insoluble by-products in the solvent mixture, were also cficiency oed by diverse analytical methods and revealed that these were typically composed of a lignin moiety regardless of catalyst. According to the results of nuclear magnetic resonance (NMR), Fourier Tcinsform Infrared Spectroscopy (FT-IR) and Gel permeation chromatograp r (GPC), the main components of precipitates seem to be lignin polymers. However, their structures could be slightly modified during pretreatment and mixed with some carbohydrates by chemical bonds and/or physical associations.

• Journal of Plant Biotechnology
• /
• v.48 no.1
• /
• pp.34-43
• /
• 2021

Targeted genome editing using the CRISPR/Cas9 system is a ground-breaking technology that is being widely used to produce plants with useful traits. However, for woody plants, only a few successful attempts have been reported. These successes have used Agrobacterium-mediated transformation, which has been reported to be very efficient at producing genetically modified trees. Nonetheless, there are unresolved problems with plasmid sequences that remain in the plant genome. In this study, we demonstrated a DNA-free genome editing technique in which purified CRISPR/Cas9 ribonucleoproteins (RNPs) are delivered directly to the protoplasts of a hybrid poplar (Populus alba × Populus glandulosa). We designed three single-guide RNAs (sgRNAs) to target the stress-associated protein 1 gene (PagSAP1) in the hybrid poplar. Deep sequencing results showed that pre-assembled RNPs had a more efficient target mutagenesis insertion and deletion (indel) frequency than did non-assembled RNPs. Moreover, the RNP of sgRNA3 had a significantly higher editing efficacy than those of sgRNA1 and sgRNA2. Our results suggest that the CRISPR/Cas9 ribonucleoprotein-mediated transfection approach is useful for the production of transgene-free genome-edited tree plants.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.72-76
• /
• 1985

Populus alba ${\times}$ P. glandulosa cuttings in nursery bed were inoculated with mycelium of ectomycorrhizal fungus, Pisolithus tinctorius (Pt) to evaluate effectiveness of the fungus in growth stimulation of poplar. Pt was cultured in 1l glass bottles with vermiculite-peatmoss mixture moistened with modified Melin-Norkrans' solution. The nursery bed was arranged for microplots of $1{\times}2m$ in size and fumigated with methyl bromide before inoculation and cutting placement. Fifty cuttings were placed in each microplot and two treatments (fumigation only and fumigation plus Pt inoculation) were replicated three times. At the end of the first growing season, inoculated plants grew 19% faster in height and produced 49% more dry weight (above-ground portion) than uninoculated plants. Survival rate of inoculated cuttings was also improved by 20% over that of uninoculated cuttings. Inoculated cuttings developed abundant fine root system with golden brown zigzag tips. In the middle of September a sporocarp of Pt was produced from an inoculated plot, suggesting successful establishment of mycorrhiza between poplar and Pt fungus.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.3
• /
• pp.213-222
• /
• 2010

In this study, chemical compositions - holocellulose, lignin and monomeric sugars - were characterized with two poplar wood cell walls, one of which was grown at normal condition (CPW) and the other was genetically modified by antisence suppression of CCoAOMT gene expression (ACPW). Milled wood lignins were isolated from CPW and ACPW and subjected to methoxyl group, DFRC, Py-GC/MS, GPC, $^{13}C$-NMR analysis, respectively. There were few differences in holocellulose contents in both cell walls, which were determined to 81.6% in CPW and to 82.3% in ACPW. However, lignin contents in ACPW was clearly decreased by the suppression of CCoAOMT gene expression. In CPW 21.7% of lignin contents was determined, while lignin contents in ACPW was lowered to 18.3%. The relative poor solubility of ACPW in alkali solution could be attributed to the reduction of lignin content. The glucose contents of CPW and ACPW were measured to 511.0 mg/g and 584.8 mg/g and xylose contents 217.8 mg/g and 187.5 mg/g, respectively, indicating that suppression of CCoAOMT gene expression could be also influenced to the formation of monomeric sugar compositions. In depth investigation for milled wood lignin (MWL) isolated from both samples revealed that the methoxyl contents at ACPW was decreased by 7% in comparison to that of CPW, which were indirectly evidenced by $^{13}C$-NMR spectra and Py-GC/MS. According to the data from Py-GC/MS S/G ratios of lignin in CPW and ACPW were determined to 0.59 and 0.44, respectively. As conclusive remark, the biosynthesis of syringyl unit could be further influenced by antisense suppression of CCoAOMT during phenylpropanoid pathway in the plant cell wall rather than that of guaiacyl unit.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.3
• /
• pp.131-135
• /
• 1995

Physiologically modified stem nodes derived from ex vitro and in vivo explants of hybrid aspen (Populus alba L.X P.grandidentata Michx. 'Crandon') were tested for their multiple shoot regeneration capacity using a broad spectrum dosage of cytokinins. Ex vitro derived stem nodes with excised axillary buds at the time of culture produced 11 to 13 multiple shoots on 20 to 30 $\mu$M zeatin containing Woody Plant Medium (WPM) after 6 weeks. Excision of axillary bud sprouts after 2 weeks of culture and culture of the remaining stem nodes on WPM with 1.0 to 2.0 $\mu$M BA or 10 to 30 $\mu$M zeatin produced 13 to 15 and 7 to 8 shoots per explant, respectively, Multiple tiny shoots were produced when in vivo derived stem nodes (on which all leaves were removed) were cultured on WPM with 30 to 50 $\mu$M 2iP or 20 to 50 $\mu$M zeatin. The greatest number of multiple tiny shoot proliferation (32 to 50 shoots per explant) were obtained when the explants were cultured on media containing 20 $\mu$M zeatin. Successful transplanting of these multiple shoots into the greenhouse and/or nursery was achieved.