• 한국인쇄학회지
• /
• 제7권1호
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• 공업화학
• /
• 제16권5호
• /
• pp.614-619
• /
• 2005

폴리올, 실리콘 수지, 변성 실리콘 수지 등을 유화제로 유화시켜 수용성 소포제를 제조하였다. 제조한 소포제에 대하여 소포성, 상분리 시간, 점도 등을 측정하였다. PPG 혼합물의 상분리 시간은 PPG 400>PPG 3000>PPG 1000이었다. PPG 1000을 혼합하였을 때는 다른 것에 비하여 뛰어난 소포성을 나타내었다. 실리콘 수지 혼합물의 상분리 시간은 TSF-451-350>TSF-451-200>TSF-451-50이었다. TSF-451-50을 혼합하였을 때는 상용성 부족으로 혼합물의 부피가 증가되었다. 고분자량의 실리콘 수지를 사용할수록 소포성은 좋지 않았다. 변성 실리콘 수지는 물에 잘 분산되었지만 폴리올에 대한 상용성은 좋지 않았다. 유화제에 대한 소포성은 SPAN 20>SPAN 60>SPAN 80의 순이었다. SPAN 80은 실리콘 수지에 대하여 혼합성이 좋지 않았지만 YAS 6406이나 PPG 1000에 대해서는 좋은 혼합성을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3331-3337
• /
• 2012

Ru-modified Pt nanoparticles of various sizes on platelet carbon nanofiber toward methanol oxidation were investigated in terms of particle size effect. The sizes of Pt nanoparticles, prepared by polyol method, were in the range of 1.5-7.5 nm and Ru was spontaneously deposited by contacting Pt nanoparticles with the Ru precursor solutions of 2 and 5 mM. The Ru-modified Pt nanoparticles were characterized using transmission electron microscopy, X-ray photoelectron spectroscopy and cyclic voltammetry. The methanol oxidation activities of Ru-modified Pt nanoparticles, measured using cyclic voltammetry and chronoamperometry, revealed that when the Pt particle size was less than 4.3 nm, the mass specific activity was fairly constant with an enhancement factor of more than 2 at 0.4 V. However, the surface area specific activity was maximized on Pt nanoparticles of 4.3 nm modified with 5 mM Ru precursor solution. The observations were discussed in terms of the enhancement of poison oxidation by Ru and the population variation of Pt atoms at vertices and edges of Pt nanoparticles due to selective deposition of Ru on the facets of (111) and (100).

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.318-323
• /
• 2015

For commercialization of fuel cell electric vehicles, one of the key objectives is to improve durability of MEA and electrocatalysts. Regarding electrocatalysts, the major issue is to reduce carbon corrosion and dissolution of Pt caused by harsh conditions, for example, SU/SD (Start-up/Shut-down). In this research, OER (Oxygen Evolution Reaction) catalyst has been developed improvement of durability. A modified polyol process is developed by controlling the pH of the solvent to synthesize the PtIr nanocatalysts on carbon supports. Each performance of the MEAs applying PtIr and Pt are equivalent because PtIrnanocatalysts have both ORR and OER activity. Breadboard test for catalyst durability in harsh conditions and high potentialsis found that the MEA applying PtIrnanocatalysts durability is improved more than the MEA applying Pt nanocatalysts.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.

• 공업화학
• /
• 제25권1호
• /
• pp.78-83
• /
• 2014

본 연구에서는 수정된 폴리올법에 의해 합성된 백금-이트륨 및 백금-니켈 합금 촉매들의 성능 및 특성 평가를 진행하였다. 그렇게 합성된 합금 촉매들은 고분자전해질연료전지의 공기극 촉매로 사용되며 그 촉매들의 산소환원반응성 및 연료전지의 전기적 성능이 측정되고 상업적으로 사용되는 백금 촉매와 해당하는 결과들이 비교되었다. 성능 및 특성 비교를 위해, 백금 합금 촉매들의 입자크기와 분포는 투과전자현미경에 의해 관측되었고 활성표면적은 반복주사 전압-전류법에 의해 측정되었으며 그들의 산소환원반응성 및 연료전지의 전기적 성능은 회전원판 및 회전-고리 원판전극을 이용한 선형주사 전압-전류법 및 완전지 테스트를 통해 평가되었다. 그 결과 백금 합금 촉매들의 구조적 특성인 입자크기 및 분포 및 활성표면적은 상용 백금 촉매와 그 특성이 비슷하였다. 촉매들의 산소환원반응성의 경우에도 백금 합금 촉매들은 상용 백금 촉매와 비슷하거나 더 나은 반파장전위, 속도론적 전류밀도, 산소분자당 전이되는 전자수, 과산화수소 생성율을 나타내었다. 촉매의 구조적 특성 및 산소환원반응성에 입각해서 완전지 성능을 평가했을 때, 백금 합금 촉매들은 상용백금 촉매보다 더 우수한 0.6 V에서 전류밀도 및 최대출력밀도 값을 나타내었다. 이를 토대로 수정된 폴리올법에 의해 합성된 백금 합금 촉매들은 상용백금 촉매보다 비슷하거나 우수한 산소환원반응성 및 완전지 성능을 가질 수 있음을 제시하였다.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.207-212
• /
• 2015

The purpose of this research was to synthesize fluorine modified waterborne polyurethane dispersion (F-WPU) by soap-free (internal emulsifier) emulsion polymerization techniques, to prepare coating solution based on fluorine modified waterborne polyurethane dispersion (F-WPU) and to compare the chemical and thermo-mechanical properties on the electrogalvanized steel sheet. Environmentally friendly F-WPU was prepared with a fluorinated polyol containing 60 wt% of fluorine. There are various ways of combining a wide variety of fluorinated polyols and diisocyanate to exhibit novel properties of waterborne polyurethane dispersion. Components of coating solution were largely divided into 4 kinds i.e., F-WPU, acrylic emulsion, silane coupling agent, and colloidal silicate. F-WPU coating solution on the electro-galvanized steel sheet showed excellent properties of corrosion resistance, alkali resistance and heat resistance, as compared to other coating solutions using a general waterborne resin. The F-WPU coating solution's reliable effects are possibly due to the fluorine atoms incorporated even in a small amount of F-WPU.

• Advances in nano research
• /
• 제9권2호
• /
• pp.123-131
• /
• 2020

Conventional fabrics that have modified in to conductive fabrics using conductive nanomaterials have novel applications in different fields. These of fabrics can be used as heat generators with the help of the Joule heating mechanism, which is applicable in thermal therapy and to maintain the warmth in cold weather conditions in a wearable manner. A modified fabric can also be used as a sensor for body temperature measurements using the variation of resistance with respect to the body temperature deviations. In this study, polyol synthesized silver nanowires (Ag NWs) are incorporated to commercially available cotton fabrics by using drop casting method to modify the fabric as a thermogenic temperature sensor. The variation of sheet resistance of the fabrics with respect to the incorporated mass of Ag NWs was measured by four probe technique while the bulk resistance variation with respect to the temperature was measured using a standard ohm meter. Heat generation profiles of the fabrics were investigated using thermo graphic camera. Electrically conductive fabrics, fabricated by incorporating 30 mg of Ag NWs in 25 ㎠ area of cotton fabric can be heated up to a maximum steady state temperature of 45℃, using a commercially available 9 V battery.

• 공업화학
• /
• 제16권3호
• /
• pp.342-347
• /
• 2005

하이퍼브랜치 폴리올(HBP-16, 32, 64)과 acrylic acid로부터 광경화형 하이퍼브랜치 아크릴레이트를 합성하였고, 그 물성을 조사하였다. TGA로 측정한 UV 경화필름의 열안정성은 관능기 수가 증가할수록 좀더 높은 온도로 이동하였다. 또한 아크릴 레이트의 관능기 수가 증가할수록 경도, 내마모성, 인장강도가 우수하였으며, 내후성 테스트에서는 아크릴레이트의 관능기수가 증가할수록 황변 지수 값이 증가하는 결과를 보여주었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.588-590
• /
• 2008

Yellow-emitting $Y_3Al_5O_{12}$:Ce nanocrystalline phosphor and orange-emitting CdS:Mn/ZnS core/shell quantum dots were prepared by a modified polyol and a reverse micelle chemistry, respectively. To compensate a poor color rendering index of YAG:Ce nanocrystalline phosphor due to the lack of red spectral component, CdS:Mn/ZnS quantum dots were blended into YAG:Ce. Based on spectral evolutions in the blended systems, hybrid white light emitting diodes are fabricated and characterized.