• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.202-202
• /
• 2011

Diagnostics of plasma density is a key factor for monitoring plasma processing. Various probes are invented to measure plasma density and cut-off probe is a one of the most promising diagnostics tool for measuring plasma density. However, at the low density or high pressure the cut-off probe cannot clearly resolve the cut-off peak. Several reasons make this problem: Cut-off likes peaks caused by cavity resonances and weaken transmission spectrum signal at high pressure. Recently, You et al., have researched mechanism of cut-off probe and we improve the cut-off reliability and sensitivity base on that research. Modified cut-off antenna is adapted and bias cut-off probe method is tried. These experiment results have good agreement with the previous study and show good measurement characteristics.

• 응용통계연구
• /
• 제27권3호
• /
• pp.501-512
• /
• 2014

상당수의 사업체 조사는 절사표본설계법을 사용하고 있다. 이는 절사표본설계법에서 얻은 전수층이 많은 정보를 포함하고 있어 전체 표본크기를 최소화 할 수 있는 장점이 있기 때문이다. 그러나 최근 전수층에 포함된 사업체들의 무응답률이 높아감에 따라 전수층이 가지고 있는 장점에 한계가 나타나고 있다. 이에 Lee (2011), Shin과 Lee (2013)는 표본설계 단계에서부터 주어진 허용오차를 만족하면서 전수층 규모를 최소화하는 연구를 실시하였다. 본 연구에서는 주어진 허용오차를 만족하고 Hidiroglou (1986)가 제안한 방법으로 산출 된 표본크기를 고정한 상태에서 표본층 분산에 알려진 함수를 적합하여 전수층 크기를 최소화하는 새로운 최적 절사점을 제안하였다. 또한 Hidiroglou (1986)와 Shin과 Lee (2013)가 제안한 절단분포를 이용한 방법과 본 연구에서 제안한 방법을 모의실험과 사례연구를 통해 비교하였다.

• Nuclear Engineering and Technology
• /
• 제49권5호
• /
• pp.1100-1108
• /
• 2017

A thermal-hydraulic system code is an essential tool for the design and safety analysis of a nuclear power plant, and its accuracy quantification is very important for the code assessment and applications. The fast Fourier transform-based method (FFTBM) by signal mirroring (FFTBM-SM) has been used to quantify the accuracy of a system code by using a comparison of the experimental data and the calculated results. The method is an improved version of the FFTBM, and it is known that the FFTBM-SM judges the code accuracy in a more consistent and unbiased way. However, in some applications, unrealistic results have been obtained. In this study, it was found that accuracy quantification by FFTBM-SM is dependent on the frequency spectrum of the fast Fourier transform of experimental and error signals. The primary objective of this study is to reduce the frequency dependency of FFTBM-SM evaluation. For this, it was proposed to reduce the cut off frequency, which was introduced to cut off spurious contributions, in FFTBM-SM. A method to determine an appropriate cut off frequency was also proposed. The FFTBM-SM with the modified cut off frequency showed a significant improvement of the accuracy quantification.

• 응용통계연구
• /
• 제17권3호
• /
• pp.393-402
• /
• 2004

본 연구에서는 통계청에서 매년 실시하고 있는 사업체 기초통계조사 자료를 조사모집단으로 하여 전자상거래 시장규모, e-비즈니스 투자규모 뿐만 아니라, 전자상거래 및 e-비즈니스 일반현황을 동시에 파악하기 위한 표본설계방안을 제안하고자 한다.

• 식품과학과 산업
• /
• 제50권2호
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

• Communications for Statistical Applications and Methods
• /
• 제15권6호
• /
• pp.883-897
• /
• 2008

2006년 통계청이 시행한 광업 제조업 통계조사 결과(2005년 실적치)를 모집단으로 사용하면 최근 동향을 반영한 표본설계가 가능하다. 본 논문은 기존의 12개 업종보다 세분화된 94개 세부업종에 분류에 따라 매월 부품 소재산업의 생산, 출하, 재고의 변동사항을 조사하여 부품 소재산업의 경기변동실태를 파악하고 부품 소재산업의 육성정책 및 기업경영의 기초자료를 제공할 수 있는 새로운 표본설계를 제안한다. 표본설계는 응용절사법과 주성분을 이용한 다변량 네이만 배정법을 이용하여 층별로 표본크기를 결정하여 배정하고 표본추출은 확률비례계통추출을 사용한다.

• Journal of Korean Neurosurgical Society
• /
• 제66권4호
• /
• pp.476-481
• /
• 2023

Objective : The latest version of the Leksell Gamma Knife Icon^TM allows for mask- and frame-based fixation. Although mask fixation provides fractionated treatment and immobilization using a noninvasive method, it is not free from collision. The authors investigated the collision problem with a modified mask fixation method. Methods : This study presents a case of two meningiomas in the frontal area, where a collision occurs in the occipital area. A modified mask fixation method was introduced to avoid the collision : first, the edges of the head cushion were cut off and polystyrene beads with a diameter of approximately 5 cm were removed. Next, the head cushion was sealed using a stapler. Finally, the head cushion was flattened in the adapter. We compared the shot coordinates, 3-dimensional (3D) error, clearance distance, and vertical depth of the head cushion between the initial and modified mask fixations. Results : When comparing the initial and modified mask fixations, the difference in the shot coordinates was +10.5 mm along the y-axis, the difference in the 3D error was approximately 18 mm, and the difference in clearance was -10.2 mm. The head cushion was approximately 8 mm deeper in the modified mask fixation. Conclusion : Based on these findings, we recommend a modified mask fixation method for gamma knife radiosurgery using ICON with a collision.

• Nuclear Engineering and Technology
• /
• 제6권2호
• /
• pp.89-96
• /
• 1974

열중성자 포획 과정을 통한 핵이성체 쌍 즉 $^{80}$ B $r^{m, g}$, sup 81/S $e^{m, g}$, $^{104}$ R $h^{m, g}$, $^{116}$ I $n^{m, g}$ 및 $^{134}$ C $s^{m, g}$ 의 단면적 비를 다루었다. 방사화 방법에 의하여 구하여진 이들 핵이성체 쌍의 단면적 비의 실험측정치를 수정 보완된 Huizenga-Vandenbosch법에 의한 계산치와 비교 검토하였다. 상기 측정치와 계산치는 spin cut-off parameter와 ${\gamma}$-선의 중복도를 적절히 조정함으로써 30% 이내의 오차 범위내에서 일치시킬 수 있었다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 추계 학술발표회 논문집
• /
• pp.59-62
• /
• 2003

양곡소비량조사는 가구부문과 사업체부문에서 소비하는 주요식품의 소비량을 조사함과 동시에 주곡인 쌀의 재고량을 조사한다. 이 조사는 해마다 통계청에서 표본설계하여 실시하는 표본조사에 의존한다. 특히, 사업체 부문의 양곡소비량 조사는 응용절사법(Modified Cut-Off Sampling Method)에 의해 표본추출되어 매년 11월에 조사가 실시되고 있다. 2003년도 사업체 양곡소비량 및 재고량조사는 2001년 사업체기초통계조사와 광공업통계조사를 모집단으로 하여 22,320 대상업체 중에서 819업체를 전수조사하고 2,145 업체를 표본조사하여 전체를 추계한다.

• 보건교육건강증진학회지
• /
• 제27권1호
• /
• pp.105-113
• /
• 2010

Objcetive: The purpose of this study was to establish body mass index percentiles and cutoffs for overweight and obesity in East Asian Adolescent. Methods: Based on one's age and gender, subjects were selected and measured their weight and height in order to calculate BMI. For BMI cut off points, data were analyzed and percentile curves were established by the modified LMS method. Results were followed by comparing BMI cut off points and percentiles with one's nationality, age and gender. Results: The prevalence of male's overweight and obesity among East Asian adolescent were as follows: Taiwan (15.4%, 9.0%), Korean (14.5%, 8.5%), Chinese (13.3%, 6.6%), and Japanese (6.0%, 2.1%). And for female, Korean (13.1%, 3.7%), Taiwan (12.6%, 5.1%), Chinese (8.3%, 2.3%) and Japanese (7.9%, 3.1%) were in the order. Conclusion: Corresponded to the whole subjects, 11.0% of men were overweight, 4.7 were obesity and that appeared in women with 9.0% in overweight, 3.5% were obese.