• Polymer Science and Technology
• /
• v.4 no.2
• /
• pp.104-111
• /
• 1993

• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.189-195
• /
• 2015

In this study, we prepared epoxidized poly ethylene-ter-1-decene-ter-divinylbenzene (Epo-PEHV) as a reactive compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). Firstly, PEHV was prepared under high catalyst activity according to content of catalyst and cocatalyst. After then, we modified vinyl group of the terpolymer with epoxy group. We observed that the terpolymer was successfully epoxidized by 1H-NMR and FT-IR analysis. The Epo-PEHV was added by 2, 5, 10% in PP/EVOH blends. The morphologies and mechanical properties of PP/Epo-PEHV/EVOH blends were analyzed by SEM and UTM, respectively. Epo-PEHV enhanced the interfacial adhesion of PP and EVOH blends.

• Korea-Australia Rheology Journal
• /
• v.13 no.2
• /
• pp.61-65
• /
• 2001

Thermoplastic nanocomposites based on the copolymers of polypropylene (PP)-polystyrene (PS) and organically modified montmorillonite (org-MMT) were produced by using power ultrasonic wave in an intensive mixer. Owing to the unique action of the ultrasonic wave, free radicals of styrene monomers and macroradicals of PP were generated, by which copolymers of PP and PS were formed. Another important aspect of using ultrasonic wave during the mixing process was to enhance nano-scale dispersion of org-MMT by destructing the agglomerates of org-MMT in the polymer matrix. Optimum conditions for the in-situ copolymerization and melt intercalation were studied with various concentrations of styrene monomer, sonication time and different kinds of clay. It was found that a novel attempt carried out in this study yielded further improvement in the mechanical performance of the nanocomposites compared to those produced by the conventional melt mixing process.

• Polymer(Korea)
• /
• v.24 no.3
• /
• pp.374-381
• /
• 2000

Composites of polypropylene (PP) and organically modified montmorillonite (org-MMT) were prepared by melt mixing in an intensive mixer. Three grades of PP's having different melt viscosities were employed to investigate the dispersion characteristics of the composites with various org-MMT's. Depending on the matrix viscosity and nature of the interlayer in org-MMT significant variations of the phase structure were found. Under the constant mixing condition and matrix viscosity, intercalation of PP chains into the interlayer of org-MMT was possible when initial interlayer distance and packing density were maintained in the optimum range; by which the loss in entropy associated with the confinement of polymer chains was compensated. The state of org-MMT particle dispersion was improved by increasing the matrix viscosity only in the case that dispersed phase is suitable for intercalation process thermodynamically, otherwise little variation was occurred regardless of the matrix viscosity. Due to the lack of specific interaction between PP and erg-MMT considered here, although the intercalation was possible for an appropriate org-MMT, the composites revealed unstable phase structure upon increasing the mixing time, which was characterized by agglomeration of the org-MMT domains.

• Molecules and Cells
• /
• v.23 no.1
• /
• pp.100-107
• /
• 2007

The moss Physcomitrella patens has two life cycles, filamentous protonema and leafy gametophore. A modified from of suppression subtractive hybridization (SSH), mirror orientation selection (MOS), was applied to screen genes differentially expressed in the P. patens protonema. Using reverse Northern blot analysis, differentially expressed clones were identified. The identified genes were involved mainly in metal binding and detoxification. One of these genes was an AP2 (APETALA2) domain-containing protein (PpACP1), which was highly up-regulated in the protonema. Alignment with other AP2/EREBPs (Ethylene Responsive Element Binding Proteins) revealed significant sequence homology of the deduced amino acid sequence in the AP2/EREBP DNA binding domain. Northern analysis under various stress conditions showed that PpACP1 was induced by ethephon, cadmium, copper, ABA, IAA, and cold. In addition, it was highly expressed in suspension-cultured protonema. We suggest that PpACP1 is involved in responses to metals, and that suspension culture enhance the expression of genes responding to metals.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.665-670
• /
• 2005

Nanocomposites of polypropylene with organically modified clays were compounded on a twin-screw extruder by two-step melt compounding of three components, i.e., polypropylene, maleic anhydride grafted polypropylene (PP-g-MA), and organically modified clay. The effect of PP-g-MA compatibilizers, including PH-200, Epolene-43, Polybond-3002, Polybond-3200, with a wide range of maleic anhydride (MA) content and molecular weight was examined. Morphologies of nanocomposites and their mechanical properties such as stiffness, strength, and impact resistance were investigated. X-ray diffraction patterns showed that the dispersion morphology of clay particles seemed to be determined in the first compounding step and the further dispersion of clays didn't occur in the second compounding step. As the ratio of PP-g-MA to clay increased, the clay particles were dispersed more uniformly in the matrix resin. As the dispersibility of clays was enhanced, the reinforcement effect of the clays increased, however impact resistance decreased.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.403-414
• /
• 2001

The purpose of this study was to evaluate treatment effects of the modified Teuscher appliance (MTA) in early Class II division 1 malocclusion. For this purpose, treatment effects of the bionator were compared with those of the MTA. The twenty subjects who were treated excellently with bionator and MTA were selected in each group. In pre- and post-treatment lateral cephalograms, 50 variables were measured, and then the differences between pretreatment and posttreatment data of the bionator and the MTA were statistically evaluated by t-test. The results were as follows : 1. The linear measurements that showed large difference between the bionator group and the MTA group are U1 to FH, U1 to PP, U6 to FH, U6 to PP, Ar-Pog, ramus height, L1 to A-Pog, L1 to facial plane (p<0.05). 2. The angular measurements that showed large difference between the bionator group and the MTA group are SNB, SNA, FABA, APDI (p<0.05). 3. The measurements of the growth pattern such as facial height ratio, FMA, SN-MP angle showed no difference between two groups (p>0.05). These results suggest that the bionator influence the mandiblar growth and lower dentoalveolar structures more than the MTA, and the MTA influence upper jaw and upper dentoalveolar structures more than the bionator comparatively in early Class II division I malocclusion.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.458-463
• /
• 2003

The effect of ozone surface treatment of montmorillonite (MMT) was investigated in thermal stabilities of polypropylene (PP) nanocomposites. Sodium montmorillonite (Na$\^$+/-MMT) was organically modified with dodecylammonium chloride. The surface properties of MMT, including the specific surface area (S$\_$BET/), equilibrium spreading pressure ($\pi$$\_$e/), and London dispersive component (${\gamma}$s$\^$L/), were studied by the BET method with $N_2$ adsorption. Also, the thermal stabilities of the nanocomposites were investigated in DSC and TGA. As experimental results, $\pi$$\_$e/ and ${\gamma}$s$\^$L/ of the ozonized dodecylammonium chloride (DA-MK ( $O_3$)) were increased in about 1.7 and 3.5 mJ/ $m^2$, resulting from the increasing of the micropores. From the DSC results, it was found that the melting temperature and crystallization temperature of PP/DA-MK and PP/DA-MK ( $O_3$) were higher that those of pure PP. These results were explained that dodecylammonium chloride of nano-scale led to a nucleation effect for PP crystallization. Also, it was found that E$\_$t/ of the PP/DA-MK ( $O_3$) nanocomposies was increased within about 64 kJ/mol. These results were probably explained by the improvement of dispersivity of DA-MK ( $O_3$) in a PP matrix.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.405-412
• /
• 2001

In order to impart dyeability on to Polypropylene fiber, PP/EVA blend in the form of fibers and film were preparared using melt blending process. Ethylene vinylacetate containing 28wt% of vinylacetate(EVA(28)) was used as a copolymer. In the study of mechanical properties, tenacity and initial modulus decreased with Increasing EVA concentrations, whilst extension at break increased with increasing EVA contents. Their results in the dyeing behavior show that dye adsorption increased with increased EVA contents iota both blend fibers and films. The extent of dye uptake of red dye to modified polypropylene fibers was greater than that of Blue and Yellow counterparts due to the difference behavior of dye particles in dyeing bath.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.47-47
• /
• 2001

In order to impart dyeablility on to Polypropylene fiber, PP/EVA blend in the form of fibers and film were preparared using melt blending process. Ethylene vinylacetate containing 28wt% of vinylacetate(EVA(28)) was used as a copolymer. In the study of mechanical properties, tenacity and initial modulus decreased with increasing EVA concentrations, whilst extension at break increased with increasing EVA contents. Their results in the dyeing behavior show that dye adsorption increased with increased EVA contents for both blend fibers and films. The extent of dye uptake of red dye to modified polypropylene fibers was greater than that of Blue and Yellow counterparts due to the difference behavior of dye particles in dyeing bath.