• Earthquakes and Structures
• /
• 제26권3호
• /
• pp.219-228
• /
• 2024

This study examines damping modification factors (DMFs) of elastic input energy spectra corresponding to a set of 116 earthquake ground motions. Mean input energy per mass spectra and mean DMFs are presented for both considered ground motion components. Damping ratios of 3%, 5%, 10%, 20%, and 30% are used and the 5% damping ratio is considered the benchmark for DMF computations. The geometric mean DMFs of the two horizontal components of each ground motion are computed and coefficients of variation are presented graphically. The results show that the input energy spectra-based DMFs exhibit a dependence on the damping ratio at very short periods and they tend to be nearly constant for larger periods. In addition, mean DMF variation is obtained graphically for also the damping ratio, and mathematical functions are fitted as a result of statistical analyses. A strong correlation between the computed DMFs and the ones from predicted equations is observed.

• Membrane and Water Treatment
• /
• 제15권1호
• /
• pp.21-29
• /
• 2024

1H,1H,2H,2H-perfluorodecytriethoxysilane (C₁₆H₁₉F₁₇O₃Si) be successfully applied to the hydrophobic modification of Al₂O₃ tubular ceramic membrane. Taking the concentration of modification solution, modification time, and modification temperature as factors, orthogonal experiments were designed to study the hydrophobicity of the composite membranes. The experiments showed that the modification time had the greatest impact on the experimental results, followed by the modification temperature, and the modification solution concentration had the smallest impact. Concentration of the modified solution 0.012 mol·L^-1, modification temperature 30 ℃ and modification time 24 h were considered optimal hydrophobic modification conditions. And the pure water flux reached 274.80 kg·m^-2·h^-1 at 0.1MPa before hydrophobic modification, whereas the modified membrane completely blocked liquid water permeation at pressures less than 0.1MPa. Air gap membrane distillation experiments were conducted for NaCl (2wt%) solution, and the maximum flux reached 4.20 kg·m^-2·h^-1, while the retention rate remained above 99.8%. Given the scarcity of freshwater resources in coastal areas, the article proposed a system for seawater desalination using air conditioning waste heat, and conducted preliminary research on its freshwater production performance using Aspen Plus. Finally, the proposed system achieved a freshwater production capacity of 0.61 kg·m^-2·h^-1.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.65-72
• /
• 2009

도로교설계기준은 일반교량에 대한 내진설계방법으로 응답수정계수를 사용하는 스펙트럼해석법을 제시하고 있다. 그러나 중진지역이라는 한반도의 상황과 국내의 교량설계 및 시공환경에 대한 적용성은 아직 검증되지 않은 실정이다. 그러므로 도로교설계기준의 스펙트럼해석법을 적용하여 내진설계의 기본개념으로 제시되는 붕괴방지수준이 만족되는가에 대한 검토가 요구된다. 이 연구에서는 T형 및 ${\prod}$형 교각을 하부구조로 하는 두 개의 일반교량을 해석대상교량으로 선정하고, 중진지역의 설계조건과 스펙트럼해석법을 적용하여 내진설계를 수행하였다. 이 과정에서 응답수정계수의 역할과 붕괴방지수준의 만족여부를 검토하고, 그 결과를 토대로 설계기준에 보완해야 하는 사항을 제시하였다.

• 대한간호학회지
• /
• 제37권6호
• /
• pp.902-913
• /
• 2007

Purpose: The purpose of this study was to identify the effects of a physical activity-behavior modification combined intervention(PABM-intervention) on metabolic risk factors in overweight and obese elementary school children. Methods: Thirty-two participants ($BMI\geq85$ percentile or relative $obesity\geq10$) were allocated to the PABM-intervention group and behavior modification only intervention group. The PABM -intervention was composed of exercise intervention consisting of 50 minutes of physical activity(Hip-hop dance & gym-based exercises) twice a week and the behavior modification intervention consisted of 50 minutes of instruction for modifying lifestyle habits(diet & exercise) once a week. Effectiveness of intervention was based on waist circumference, BP, HDL-cholesterol, TG, and fasting glucose before and after the intervention. Results: The proportion of subjects with 1, 2, 3 or more metabolic risk factors were 28.1, 43.8, and 15.6%, respectively. After the 8-week intervention, waist circumference, systolic BP, diastolic BP, and HDL-cholesterol changed significantly(p<.01) in the PABM group. Conclusion: This provides evidence that a PABM-intervention is effective in changing metabolic risk factors such as waist circumference, systolic BP, diastolic BP, and HDL-cholesterol in overweight and obese elementary school children.

• 생명과학회지
• /
• 제19권2호
• /
• pp.198-205
• /
• 2009

본 연구는 비만 여자중학생을 대상으로 12주간 유산소운동군(AEG), 유산소운동과 생활양식수정 병행 실시군(ALG), 대조군(CG)으로 구분하여 이들의 신체구성과 대사증후군 유병률 및 대사증후군 위험인자에 미치는 효과를 규명하기 위해 실시하였다. 프로그램 실시 전 연구대상자 전체의 대사증후군 유병률이 48.1%로 나타났으나, 프로그램 실시 후 AEG, ALG에서 각각 33.3, 27.8%의 대사증후군 유병률이 개선되었다. 대사증후군 위험인자는 AEG와 ALG에서 허리둘레, TG, 혈당 및 수축기혈압이 CG보다 더 개선되었다. 그러나 HDL-C와 이완기혈압의 변화는 집단간에 차이가 없었다. 또한 대사증후군의 모든 항목의 변화에서 AEG와 ALG간에 차이가 나타나지 않았다. 따라서 유산소운동과 생활양식수정 병행 실시군의 이 같은 긍정적인 변화는 생활양식수정 실시의 추가적인 효과가 나타나지 않았음으로 유산소운동의 단독효과인 것으로 생각된다.

• 대한치과의사협회지
• /
• 제48권2호
• /
• pp.96-105
• /
• 2010

Titanium implant is used as the most popular dental material for replacement of missing teeth recently. A lot of studies on the surface modification of titanium implant have been carried out for enhancing osseointegration. The surface modification techniques could be classified as follows; topographic modifications which provide roughness and porosity, chemical surface modificationss or deposition of osseoconductive materials, and biochemical modifications to immobilize bone growth factors on titanium surface. In this study, the current and ongoing surface modification techniques and its typical characteristics used in clinics were reviewed. In the future, study and implication about biochemical modifications including patient' s individual characteristics will be important.

• 한국지진공학회논문집
• /
• 제23권1호
• /
• pp.71-82
• /
• 2019

Most school buildings consist of reinforced concrete (RC) moment frames with masonry infills. The longitudinal direction frames of those school buildings are relatively weak due to the short-column effects caused by the partial masonry infills and need to be evaluated carefully. In 'Manual for Seismic Performance Evaluation and Retrofit of School Facilities' published in 2018, response modification factor of 2.5 is applied to non-seismic RC moment frames with partial masonry infills, but sufficient verification of the factor has not been reported yet. Therefore, this study conducted seismic performance evaluation of planar RC moment frames with partial masonry infills in accordance with both linear analysis and nonlinear static analysis procedures presented in the manual. The evaluation results from the different procedures are compared in terms of assessed performance levels and number of members not meeting target performance objectives. Finally, appropriate response modification factors are proposed with respect to a shear-controlled column ratio.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.201-208
• /
• 2006

This study lotuses on the seismic behavior of 3-, 9-, and 20-story steel moment resisting frame (MRF) structures designed in accordance with the 2000 International Building Code using different Response Modification factors (R factors) 8, 9, 10, 11, and 12. For a detailed case study, 30 different structures were evaluated for twenty ground motions representing the hazard level which is equal to a 2% probability exceeding in 50 years (2% in 50 years). The results showed that the current R factors provide conservative designs for the 3- and 9-story buildings for the Collapse Prevention performance objective. However, the 20-story buildings designed without using the minimum requirement of spectral acceleration CS prescribed in the IBC 2000 did not satisfy the seismic performance for Collapse Prevention performance.

• 한국전산구조공학회논문집
• /
• 제26권1호
• /
• pp.49-57
• /
• 2013

일반교량은 상부구조, 연결부분, 하부구조 및 기초로 구성되어 있고 내진성능은 하부구조와 연결부분의 파괴메카니즘에 의해 결정된다. 그러므로 내진설계는 구조부재의 설계강도, 즉 설계단면을 결정하는 기본설계단계에서 수행되어야 한다. 도로교설계기준 내진설계편은 두 가지 기본설계 방식을 제시하고 있다. 첫째는 기존 설계방식으로 내진설계편이 제시한 응답수정계수를 적용하는 방식이고 둘째는 새로 도입된 연성도 내진설계 방식으로 설계자가 응답수정계수를 결정하는 방식이다. 이 연구에서는 일반교량을 대상으로 두 설계방식을 같이 적용하는 기본설계를 수행하고 내진성능 확보의 관점에서 요구되는 보완사항을 제시하였다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1193-1201
• /
• 1993

본 연구에서는 통계학적 이론 및 희귀분석에 근거한 보정함수를 모델 수정에 도입하여 조업조건별로 예측오차 요인들을 제거함으로써 예측 모델의 정도를 향상시키 고자 하였다. 이를 위해 일반강에 비해 압연하중 모델의 예측정도가 상대적으로 낮은 극저탄소강을 대상으로 하여 압연조업에 따른 압연하중 예측모델의 오차요인을 조업인 자별로 분석하였고 적용시켜 모델의 적중도를 향상시켰다.