• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.1020-1028
• /
• 2011

In this paper, we proposed a mechanism that prevents indiscreet use of digital contents, verifies created content's copyrights to provide services to granted user and protects digital contents by law by authenticating the original digital content whenever an infringement of copyright occurs in UCC environments. The proposed mechanism uses specific information and features of contents as copyrights authentication information without additional information. Also, provides the fact of violation by inferring the modification of the original digital contents. That means this mechanism infers same or similar value from the contents; fraudulent use of content, modification of content color, modification of content format, modification of content resolution and illegal use of frame not principal key frame. In that point, we found that the inferred value from the content differed according to features of content modification.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.10b
• /
• pp.51-58
• /
• 2000

The purpose of this study is the optimum modification of dynamic characteristics of stiffened plate structure. In the method of the optimization ,finite element method (FEM), sensitivity analysis and optimum structural modification method are used. To begin with, using FEM, the dynamic characteristics of stiffened plate structure is analyzed. Next, rate of change of dynamic characteristic by the change of design variable is calculated using the sensitivity analysis. Then, amount of change of design variable is calculated using this sensitivity value and optimum structural modification method. The change of natural frequency is made to be an objective function. Thickness of plate and cross section moment become a design variable. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate structure.

• Speech Sciences
• /
• v.3
• /
• pp.132-147
• /
• 1998

Previously developed methods for pitch modification have not been based on the voice source model. Therefore, the synthesized speech often sounds unnatural although it may be highly intelligible. The purpose of this paper is to analyze the alteration of a voice source signal with pitch period and to establish the pitch-modification rule based on the result of this analysis. We examine the alteration of the interval of closing phase, closed phase and open phase using the excitation waveform as the pitch increases. In comparison to the previous methods which performed directly on the speech signal, the pitch modification method based on a voice source model shows high intelligibility and naturalness. This study might benefit the application to the speaker identification and the voice color conversion. Therefore the proposed method will provide high quality synthetic speech.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.9
• /
• pp.688-693
• /
• 2003

To reduce the vibration of a gear driving system. the modification of gear tooth from the orignal involute gear profile is usually done in gear manufacturers. The quantity of tooth modification has been decided on the basis of the interference between two gear teeth during gear meshing and the elastic deformation due to loading. However. the dynamic characteristics with tooth modification has to be investigated to avoid the instability to the variation of gear meshing stiffness and the nonlinearity due to gear backlash which results in sub- or super-harmonics in its responses. This research shows the dynamic characteristics with various tooth modifications in its type and quantity.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.196-203
• /
• 2013

Surface modification of meta-aramid fibers was performed by phosphoric acid treatment. Surface morphology and element composition of untreated and treated fibers were analyzed by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). Effects of surface modification on the mechanical strength of aramid papers made from meta-aramid fibers and fibrid were investigated. Surface modification conditions were optimized by response surface analysis (RSA). Results show that phosphoric acid treatment increases the surface roughness and oxygen content of aramid fibers. They improve the interface bonding strength between aramid fibers and fibrid, which improves the tensile strength of aramid papers. The results of response surface analysis indicate that the tensile strength of aramid papers increases by 47.5% and reaches the maximum when meta-aramid fibers are treated with 21.1wt% phosphoric acid solution at $39.3^{\circ}C$ for 36.7 min.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.5
• /
• pp.40-49
• /
• 2010

Conical involute gears are being used for marine gearboxes, automotive transmissions, and robots, and so on, but not much. As involute profile gear, conical involute gear not only can be engaged with spur and helical gear but also can be used for power transmission of parallel, crossed and skewed axis with small angle. Hence, conical involute gears are likely to develop in future. Through a study on the basic theory of conical involute gear, tooth surface compressive stress analysis was performed by using commercial modeling program, comparing before and after profile modification. As a result, it noticed that tooth profile modification is able to relieve more tooth surface compressive stress than before modification.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.580-588
• /
• 1999

The reuse of software components from existing software system enhances productivity and reliability, decreases the cost of production in software development. The extraction of software components with high reusability from existing software system is very important in software reuse. The reuse of a class is classified into white-box reuse to reuse with modification and black-box reuse to reuse without modification. A class has the property of procedural language and object-oriented language. Therefore, it must measure reusability in consideration of two properties. In black-box reuse, independence of class is important quality. It can quantify through information hiding, coupling between objects, cohesion, etc. In white-box reuse, modification is the best important quality. It can quality through class complexity, coupling, cohesion, documentation, etc. We propose a new model for measurement of class reusability and the measure criteria in object-oriented program. A class that is measured by proposed model can judge whether the reuse with modification has the advantage or the reuse without modification has the advantage.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2480-2486
• /
• 2018

Mesoporous $TiO_2$ microspheres were prepared by spray pyrolysis for photocatalysis. Post modification of $TiO_2$ by heat treatment was performed to optimize its photocatalytic performance. First, spherical $TiO_2$ particles with mesoporous structure were synthesized at pyrolysis temperatures of 500, 600, and $700^{\circ}C$. After characterization by XRD, SEM, and $N_2$ adsorption, a sample prepared at $500^{\circ}C$ was found to possess desirable properties for photocatalytic performance through post-modification. In methylene blue degradation, mesoporous $TiO_2$ microspheres synthesized at $500^{\circ}C$ outperformed other microspheres. Furthermore, samples obtained by spray pyrolysis at $500^{\circ}C$ were calcined at various temperatures as a post-modification process. The sample calcined at $350^{\circ}C$ showed improved photocatalytic activity due to optimal anatase crystallinity and surface area.

• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.323-337
• /
• 2015

Membrane Fouling was considered as major drawback in various industrial applications. Thus, this paper reviews the surface modification of polyethersulfone (PES) membranes for antifouling performance. Various modification techniques clearly indicate that hydrophilicity has to improve on the PES membrane surface. Moreover, the mechanism of fouling reduction with corresponds to various modification methods is widely discussed. Incorporation of hydrophilic functional groups on PES membrane surface enhances the surface free energy thereby which reduces the fouling. Characterization techniques adopted for the surface modified membranes was also discussed. These studies might be useful for the other researchers to utilize the modification technique for the applications of waste water treatment, chemical process industry and food industry.

• Steel and Composite Structures
• /
• v.48 no.3
• /
• pp.353-365
• /
• 2023

Shape memory alloys (SMAs) have emerged as a novel functional material that is being increasingly applied in diverse fields including medical, aeronautical and structural engineering to be used in the active, passive and semi-active structural control devices. This paper is mainly aimed at evaluating the ductility and response modification factor of the steel plate shear wall (SPSW) frames with and without the Ni-Ti shape memory alloys. To this end, different configurations were utilized, in which the walls were used in the first, third, middle, and all stories. The models were numerically analyzed using OpenSees Software. The obtained results indicate that improving the shape memory properties of alloys can greatly enhance the ductility and response modification factor. Furthermore, the model whose first and third stories are equipped with the SMA shear wall was found to be 290% more ductile, with a greater response modification factor compared to the unequipped frame.