• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.55-62
• /
• 2008

In the construction field, there has been a recent and unprecedented increase in the research and development of modernized Korean traditional buildings, This is because, in today's modern society, the basic needs for survival have already been met and more people are now recognizing the importance of the identity of our unique culture. It is therefore timeous to consider not just how to preserve and use Korean traditional buildings, but also how to develop them into more industrialized and modernized buildings in a practical way. Recently, the direction has been focused on the industrialization of modernized Korean traditional buildings, including their evolution, and development, as well as on the numerous cases where construction has been delayed. In order to industrialize modernized Korean traditional buildings, we need to standardize their form and actively introduce current IT (Information Technology). In order to achieve this, it is absolutely necessary to change from the CADD (Computer Aided Design and Drafting) system to the BIM (Building Information Modeling) system, which reflects the concept of Virtual Architecture. Therefore, the aim of this study is to discuss the possibilities of using BIM system for industrialization of modernized Korean traditional buildings, extend the foundation of the form library, and develop an intelligent modeler. It is also necessary to exemplify a case model for modernized Korean traditional buildings to which BIM is applied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.912-920
• /
• 2002

As computer systems and communication technologies develop rapidly, CSCW(Computer Supported Collaborative Work) system appears nowadays, through which it is available to work on virtual space without any restriction of time and place. Most of CWCS systems depend on a special network and groupware. The systems of graphics and CAD are not so many because they are specified by hardware and application software. We propose a Web-based collaborative CAD system which is independent from any platforms, and develop a 3D solid modeler in the system. This system can be worked in the environment of Client/Server architecture. Clients connect to the design server through Java applet on WWW. The server is implemented by Java application.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.116-118
• /
• 2004

송전선로 주변의 전자계 노출은 소아들의 암 발생/사망과 성인의 암 등 여러 가지 질병 발생 가능성이 항상 있으므로 전자계 노출을 장기간 계속적으로 받고 있는 환경을 관찰하는 것이 가장 중요하다. 따라서 본 연구에서는 이에 대한 연구기반을 형성하기 위해 송전 선로의 모델과 현장 실측을 통해 송전선로 자계치를 계산하여 시뮬레이션 하고자한다. 시뮬레이션을 통해 산출된 자계치를 이용하여 최근 효과적인 자계 저감책으로 보고되고 있는 수동루프에 의한 자계저감효과를 검토하고자 한다. 입력된 데이터는 765kV 실 송전선로를 모델로 사용하였으며, 자계의 계산 및 수동 루프에 의한 자계 저감 효과를 알아보기 위해서 미국 EPRI에서 개발한 자계 계산 전용 프로그램인 EMF Modeler를 이용하였다. 먼저 송전선로에 의해 발생되는 자계의 원리를 서술하였으며, 수동 루프를 통한 자계 감소 정도를 수식으로 유도하였고, EMF Modeler를 통하여 송전선 주변의 자계 분포 및 수동루프에 의한 자계 저감 효과를 각각 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.90-99
• /
• 1993

As the finite element method has become a considerable and effective design tool in ship structural analysis, modeling of three dimensional finite element mesh is more necessary than before. However, the unique style and complexity of a ship usually make the modeling be hard and costly. Although most pre-processor of FEM software and geometric modeler provides modeling function, the capability is quite limited for complicated structure. In order to perform FEM modeling quickly, it is necessary to extract, rearrange, and formalize data from ship design database for partially automatic mesh generation. In this paper, the process of designing relational data tables from design data is shown as a part of analysis automation with the application of engineering database concept.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.2
• /
• pp.81-88
• /
• 2018

Performance evaluation of a plant to efficiently manage and maintain the performance of the plant is a very important procedure. However, since the conventional performance evaluation method is an Excel-based manual method, the preparation procedure is complicated and the versatility is poor. In this paper, we analyze the problems of the existing performance evaluation system, effectively model the equipment, calculate the missing physical properties, and improve the versatility, efficiency and accuracy of the performance evaluation through the equipment modeler which performs automatic index calculation based on this.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.219-227
• /
• 2021

Hydrogen isotopes, which are used as raw materials in fusion reaction, participate in the reaction only in small amount, and most of them are released together with impurities. In order to recover and reuse only hydrogen isotopes from this exhaust gas, a recovery process is required, and most of the hydrogen isotopes can be recovered using a Pd Membrane. In this study, the recovery rate of hydrogen isotopes was measured through the first and second stage Pd membrane experiments. In the case of the experiment using a single stage Pd membrane, about 99.2%, and in the case of the first stage and second stage Pd membrane connection experiments, a recovery rate of 99.9% or more was obtained. Therefore, the recovery rate of Pd membrane process applied to hydrogen can be applied to hydrogen isotopes. In addition, the simulation model was established using aspen custom modeler, a commercial software, and the validity of the simulation was checked by applying the references and experimental data. The simulation results based on the experimental data showed a difference of 2% or less.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.158-164
• /
• 1996

In this paper, the CNC cutting planning module for product with three dimensional solid shape is realized to develop a smart CAD/CAM system which performs systematically from the shape design of procuct by the B-Rep solid modeler to the CNC cutting of product by a machining center. The three dimensional solid shape of product can be easily designed and constructed by the Euler operators and Boolean operators of the solid modeler. And the various functions such as the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC code for the machining center and do on, are established. Especially, the overcut-free tool paths are obtained by splitting the CL solid which is composed of the offset surfaces of the solid shape of product.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.352-356
• /
• 2002

In this paper, an automated design system of suspension and steering parts is developed. The system automates the processes of 3-D modeling and 2-D drafting of the parts. In addition, the BOM and dimension data of the designed part is also automatically transferred to the database of ERP system. The system is developed by using the functions of parametric design and API(application Programming Interface) of the a commercial solid modeler.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.441-442
• /
• 2010