• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.28-35
• /
• 2006

An accurate prediction of budburst in grapevines is indispensable for vineyard frost warning system operations in spring because cold tolerance depends heavily on phonology. However, existing frost warning systems utilize only daily minimum temperature forecasts since there is no way to estimate the site-specific phonology of grapevines. A budburst estimation model based on thermal time was used to project budburst dates of two grapevine cultivars (Kyoho and Campbell Early), and advisories were issued depending on phonology as well as temperature. A 'warning' is issued if two conditions are met: the forecasted daily minimum temperature falls below $-1.5^{\circ}C$ and the estimated phonology is within the budburst period. A 'watch' is issued for a temperature range of -1.5 to $+1.5^{\circ}C$ with the same phonology condition. Validation experiments were done at 8 vineyards in Anseong in spring 2005, and the results showed a good agreement with the observations. This method was applied to the climatological normal year (1971-2000) to determine sites with high frost risk at a 30 m grid cell resolution. Among 608,585 grid cells constituting Anseong, 1,059 cells were identified as high risk for growing Kyoho and 2,788 cells for Campbell Early.

• Korean Journal of Oriental Medicine
• /
• v.17 no.2
• /
• pp.63-71
• /
• 2011

Objectives : We studied the ISP(information strategy plan) of oasis spanning 5 years. From this study we aimed at total road map to upgrade the service systematically and to carry out the related projects. If we do it as road map, oasis will be the core infra service contributing to the improvement of TKM(traditional korean medicine) research capability. Methods : We carried out 3 step ISP method composed of environmental analysis, current status analysis and future plan. We used paper, report and trend analysis document as base materials and did the survey to get opinions from users and TKM experts. We limited this study to drawing the conceptual design of oasis. Results : From environmental analysis we knew that China and USA built up the largest TM databases. We did the survey to get the activation ways of oasis. And we did the benchmarking on the advanced services through current status analysis. Finally we determined 'maximize the research value based the open TKM knowledge infra' as oasis' vision. And we designed oasis' future system which is composed of service layer, application layer and contents layer. Conclusion : First TKM related documents, research materials, researcher information and standards are merged to elevate the TKM information level. Concretely large scale TKM information infra project such as TKM information classification code development, TKM library network building and CAM research information offering are carried out at the same time.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.555-562
• /
• 2016

Semantic Role Labeling (SRL) is to determine the semantic relation of a predicate and its argu-ments in a sentence. But Korean semantic role labeling has faced on difficulty due to its different language structure compared to English, which makes it very hard to use appropriate approaches developed so far. That means that methods proposed so far could not show a satisfied perfor-mance, compared to English and Chinese. To complement these problems, we focus on suffix information analysis, such as josa (case suffix) and eomi (verbal ending) analysis. Korean lan-guage is one of the agglutinative languages, such as Japanese, which have well defined suffix structure in their words. The agglutinative languages could have free word order due to its de-veloped suffix structure. Also arguments with a single morpheme are then labeled with statistics. In addition, machine learning algorithms such as Support Vector Machine (SVM) and Condi-tional Random Fields (CRF) are used to model SRL problem on arguments that are not labeled at the suffix analysis phase. The proposed method is intended to reduce the range of argument instances to which machine learning approaches should be applied, resulting in uncertain and inaccurate role labeling. In experiments, we use 15,224 arguments and we are able to obtain approximately 83.24% f1-score, increased about 4.85% points compared to the state-of-the-art Korean SRL research.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2020

Light Naphtha is distillated from crude oil unit and separated into the methane, ethylene and propylene by boiling point difference in sequence. This separation is conducted using a series of binary-like columns. This separation method is known that the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by the stage computation with ideal tray efficiency in equilibrium condition. Compared with the performance of a conventional system of 3-column model, The design outcome shows that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. The performance of the new process indicates that an energy saving of 12.1% is obtained and the cost savings of 44 million won per day based on gross domestic product is reduced under same total number of trays and the initial investment cost is saved.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.354-361
• /
• 2004

This Paper describes a crack scattering model for SH wave based on the boundary integral equation(BIE) method, where the fundamental unknown is crack opening displacement(COD). When a time harmonic plane wave was incident on a 2-D isolated crack (slit) of width 2a, the COD distributions were numerically calculated as a function of ka. The calculated COD agreed well with results obtained with other methods. The far-field scattering amplitude, which completely characterizes the flaw response, was calculated in two ways. The Kirchhoff approximation and the BIE-COD exact formulation were compared in terms of incidence angle and frequency ka in a pulse-echo mode. Maximum response was obtained for both methods at the specular reflection direction. Away from the specular direction, the Kirchhoff approximation becomes less accurate. The time domain crack response was also calculated using a band-limited spectrum of center frequency 10 MHz. At oblique incidence to the crack both methods show the existence of an antisymmetric flash points occurring from the crack edge. The Kirchhoff approximation provides an exact time interval between flash points, although it unrealistically gives the same amplitude.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.319-326
• /
• 2014

The accurate geo-referencing processes that apply ground control points is prerequisite for effective end use of HRSI (High-resolution satellite imagery). Since the conventional control point acquisition by human operator takes long time, demands for the automated matching to existing reference data has been increasing its popularity. Among many options of reference data, the airborne LiDAR (Light Detection And Ranging) data shows high potential due to its high spatial resolution and vertical accuracy. Additionally, it is in the form of 3-dimensional point cloud free from the relief displacement. Recently, a new matching method between LiDAR data and HRSI was proposed that is based on the image projection of whole LiDAR data into HRSI domain, however, importing and processing the large amount of LiDAR data considered as time-consuming. Therefore, we wmotivated to ere propose a local LiDAR chip generation for the HRSI geo-referencing. In the procedure, a LiDAR point cloud was rasterized into an ortho image with the digital elevation model. After then, we selected local areas, which of containing meaningful amount of edge information to create LiDAR chips of small data size. We tested the LiDAR chips for fully-automated geo-referencing with Kompsat-2 and Kompsat-3 data. Finally, the experimental results showed one-pixel level of mean accuracy.

• Journal of Food Hygiene and Safety
• /
• v.33 no.2
• /
• pp.89-93
• /
• 2018

High sodium dietary habits may cause various diseases, thereby threatening the public health. Various efforts have been made to control high sodium use in diets, but few studies have been conducted on health communication efforts to modify such habits. This study looks for suggestions for diet improvement education by examining whether or not high sodium dietary habits can be predicted by a consumer's perception on the threat and controllability of high sodium diets. In this study, a questionnaire was developed to measure the severity, vulnerability, efficiency, efficacy, and behavioral tendencies of the consumer, which were subscales of the protective motivation theory. The questionnaire was given to university students and their families in Chungnam Province. The results of a statistical analysis were as follows: First, more young people preferred high-sodium diets than older people. Second, the correlation analysis showed that older people knew that they were vulnerable to the negative effects of high sodium diets, but they would not change their dietary habits until they were confident that they could control the high-sodium diet. Third, the structural model analysis showed that the higher the coping perception was, the lower was the tendency to consume a high-sodium diet. These results suggest that in the effort to reduce high-sodium diets, it is more effective to provide viable information and improve efficacy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.185-196
• /
• 2006

Fracture toughness is a material property for crack initiation and propagation in fracture mechanics. For mode I fracture toughness measurement in concrete, RILEM committees 89-FMT proposed three-point bend tests based on the two-parameter fracture model. But, there is no proposed test method as a standard for mixed mode test for now. And RILEM three-point bend test procedure is complicate. Therefore, in this study, brazilian disks of various size were designed as the concrete with a similar specified concrete strength and maximum size of coarse aggregate($G_{max}$) were respectively 20mm and 40mm. And mode I fracture toughness of brazilian disks was compared with that of RILEM three-point bend test. As a result, it was suggested appropriate size(thickness, diameter) and notch length ratio of brazilan disk on the $G_{max}$. And it was verified that stress intensity factors for mixed mode can be easily calculated with the disk specimen. Stress intensity factors of a concrete brazilian disk were evaluated with finite element analysis and five terms approximation for comparison.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.783-798
• /
• 2004

An e-business client application in ubiquitous mobile computing environment may become disconnected from the enterprise server due to broken communication connections caused by the limitation of mobile computing environments(limited battery life of the mobile device, low bandwidth communication, incomplete wireless communication infrastructure, etc). It Is even Possible that mobile client application Intentionally operates in disconnected mode to reduce communication cost and the power consumption of the mobile device. We use “data hoarding” as a means of providing local autonomy to allow transactions to be processed and committed on the mobile host despite of disconnection. The key problem to this approach is the synchronization problem that serialize potentially conflicting updates from disconnected clients on master objects of the server database. In this paper, we present a new transaction synchronizing method that splits a transaction into a set of independent component transactions and give the synchronization priority on each component taking the possibility of use and conflicts in the server into consideration. Synchronization is performed component by component based un synchronization priority. After the Preferred component of a no bile transaction succeeds in synchronization with the server, the mobile transaction can pre-commit at server. A pre-committed transaction's updated value is made visible at server before the final commit of the transaction. The synchronization of the component with low synchronization priority can be delayed in adaption to wireless bandwidth and computing resources. As a result, the availability of important data updated by mobile client is increased and it can maximize the utilization of the limited wireless bandwidth and computing resources.