• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.44-46
• /
• 1997

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a switched reluctance motor (SRM) make it a viable use for many commercial adjustable speed applications. However, higher torque ripple is one of the few disadvantages of the SRM drives. This paper describes the robust control scheme that permits the phase torque flatted by adaptive reference model.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.10
• /
• pp.53-58
• /
• 1992

This paper presents a decentralized model reference adaptive control scheme for an interconnected linear system composed of a number of single-input single-output subsystems in which outgoing interactions pass through the measurement channel and are subjected to bounded external disturbances. The scheme can treat the unknown strength of interactions as well as uncertainties in subsystem dynamics, and allows for the case when the relative degree of each decoulped subsystem does not exceed two.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.1048-1053
• /
• 2003

This paper proposed a MR(Magneto-rheological) seat damper for a commercial vehicle. After formulating the governing equation of motion, an appropriate size of damper is designed and manufactured. Following the equation of fie d-dependent damping force characteristics, a semi-active seat suspension installed with the proposed MR-damper is constructed and its dynamic model id established, Subsequently, vibration isolation performance of the semi-active suspension system is demonstrated by incorporating with a MRAC(Model referenced adaptive control) fer the MR Seat Damper

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.95-106
• /
• 1992

Active control of acoustic noise is an application area of adaptive digital signal processing with increasingly interest along the last year. This work studies the implementation of the multichannel LMS filter and the application of this algorithm for the reduction of the noise inside a vechicle cabin using a number of 'secondary sources' drived by adaptive filtering of a reference noise source. Firstly, we propose the use of an adaptive method for the time-varient optimal convergence factor. Secondly, we propose the use of adaptive delayed inverse model to estimate the elastic-acoustic transfer function presented in vechicle cabin. The original, primary source is often periodic, with a known fundamental frequency. A suitably filtered reference signal can thus be used to drive the secondary sources. An algorithm is presented for adapting the coefficients of an FIR filter feeding such a secondary source in such a way as to minimize the output of a suitably placed microphone. In this algorithm, the coefficients of adaptive filter driving an array of secondary sources can be adapted to minimize the sum of the squares of the outputs of a number of error microphones. The multichannel LMS algorithm displays that such an algorithm is considered suitable to used for the global suppression of noise in vehicle cabin.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.4-9
• /
• 1999

A new control method for precision robust position control of a brushless DC (BLDC) motor using asymptotically stable adaptive load torque observer is presented in the paper. Precision position control is obtained for the BLDC motor system approximately linearized using the field-orientation method Recently, many of these drive systems use BLDC motors to avoid backlashe. However, the disadvantages of the motor are high cost and complex control because of nonlinear characteristics. Also, the load torque disturbance directly affects the motor shaft. The application of the load torque observer is published in [1] using fixed gain. However, the motor flux linkage is not exactly known for a load torque observer. There is the problem of uncertainty to obtain very high precision position control. Therefore a model reference adaptive observer is considered to overcome the problem of unknown parameter and torque disturbance in this paper. The system stability analysis is carried out using Lyapunov stability theorem. As a result, asymptotically stable observe gain can be obtained without affecting the overall system response. The load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent current which gives fast response. The experimenta results are presented in the paper.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.1-4
• /
• 1996

The purpose of this treatise is to estimate speed of an induction motor and realize a robust speed control system with estimated speed in field-weakening region. A speed estimation is based on Model Reference Adaptive System(MRAS) technique and two flux estimator are designed to be robust against parameter variation. The MRAS-based overall control scheme has been implemented on 7.5kW Spindle induction motor control system. And it is verified that the proposed control scheme is very stable and robust in field-weakening region.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.524-527
• /
• 2003

This paper proposes speed control system using a Fuzzy Logic Controller(FLC) in order to realize the speed control of Permanent Magnet AC Motor with no sensor. FLC based MRAS(Model Reference Adaptive System) estimates the speed of Permanent Magnet AC Motor. Using the estimated speed, speed control is performed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2279-2284
• /
• 2005

Generally, biped walking is difficult to control because it is a nonlinear system with various uncertainties. In this paper, we design a robust control system based on sliding-mode control (SMC) of 5-link biped robot using the wavelet neural network(WNN), in order to improve the efficiency of position tracking performance of biped locomotion. In our control system, the WNN is utilized to estimate uncertain and nonlinear system parameters, where the weights of WNN are trained by adaptive laws that are induced from the Lyapunov stability theorem. Finally, the effectiveness of the proposed control system is verified by computer simulations.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.11
• /
• pp.945-954
• /
• 1990

In this paper, we presents a robust adaptive control system design method in the work coordinate of the robot arm for conveyor tracking. In the design, if the weighting function $L_K$ is smaller than the design parameter then the transient characteristics of system becomes stable, if $L_K$ is larger than then the system becomes unstable. Proposed design method presented here is based on model referenece adaptive control and Popov stability theorem. By the utiliza/tion of an auxilary input, it is improved the transent characteristics of the system in comparison with the conventional model reference adptive control, since the rate of V and V(t) is large. The usefulness of a proposed design method has been confirmed by computer simulations.