• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.28-38
• /
• 2012

The characteristics of vibration and noise of a compressor used for electric appliances have significant influence on the quality of the products. For improvement on the quality of electric appliances, investigations for understanding the dynamic behaviour of the compressor are essential. Since Virtual Lab for the dynamics model and MAXWELL for the electromagnetics model are separate software programs with no interface, the joint simulation of the models could not be performed. This study suggests a way to develop the compressor model capable of the joint simulation with MATLAB/SIMULINK linking a flexible multi-body dynamics model, a torque model, and an electricity control model. The compressor model is found to be able to perform I/O data transfer among the sub-models and joint simulation. The simulation results of the flexible body and rigid body dynamics models were compared to check availability of the joint simulation system. In addition, the simulated vibration and driving torque of the compressor mechanisms were compared with measurements. Through the simulations, the influence of springs and LDT on the dynamic behaviour of the compressor was examined. This study examines the influence of the dynamic behaviour of the compressor mechanisms through joint simulation of the flexible multi-body dynamics model and electromagnetic circuit allows analysis.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.502-508
• /
• 2012

An analytical model for a human body is important to predict muscle and joint forces. Because it is difficult to estimate muscle or joint forces from a human body, the objective of this study is the development of a reliable analytical model for a human body to evaluate the lower extremity muscle and joint forces. The musculoskeletal system of the human lower extremity is modeled as a multibody system employing the Hill-type muscle model. Muscle forces are determined to minimize energy consumption, and we assume that motion is constrained in the sagittal plane. Muscle forces are calculated through an equilibrium analysis while rising from a seated position. The musculoskeletal model consists of four segments. Each segment is a rigid body and connected by frictionless revolute joints. Muscles of the lower extremity are simplified to seven muscles with those that are not related to the sagittal plane motion are ignored. Muscles that play a similar role are combined together. The results of the present study are compared with experimental results to validate the lower extremity model and the assumptions of the present study.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.21-27
• /
• 2013

This study is investigated on flow analysis according to grill configuration of radiator. The stream of flow which pass through radiator grill in car body and the contour of pressure distribution are estimated by the basis. As the magnitude of resistance force which flow affects the car body is investigated so that the power reduction can be reduced. As the pressure inside radiator grill is assessed, more efficiency can be investigated in order that the flow rate inside car body can be increased. Model 2 has the most air resistance and model 1 has the least among model 1, 2 and 3. Model 1 has the most air flow rate at inside. There are model 3 and 2 simulated according to flow rate. As the curved surface at radiator grill configuration increases in number, air flow rate becomes distributed uniformly. By considering the effect on air resistance and air flow rate at radiator grill, model 3 becomes the most effective configuration.

• 한국멀티미디어학회논문지
• /
• 제12권2호
• /
• pp.323-328
• /
• 2009

게임이나 가상현실 등에서 사용자들에게 사실성과 몰입 감을 주기 위해서 자연 현상들을 시뮬레이션하고 있다. 게임이나 가상현실에서 물이나 바다와 같은 유체를 3차원으로 시뮬레이션 하는데 있어서 중요한 요소는 실시간 처리와 사실성이다. 유체 모델은 특정 상황에 따른 다양한 방정식과 많은 파라미터 값에 의해 제어되기 때문에 시뮬레이션 하는데 많은 어려움이 따른다. 또한 복잡한 물리 수식을 기반으로 하기 때문에 유체 모델을 시뮬레이션하기 위해서는 많은 수행 시간이 소요된다. 본 논문에서는 실시간 유체와 강체(rigid body) 사이의 상호작용을 표현하기 위해 간략화 된 유체 표면 모델(Fluid-Surface Model)을 제안하고, 개선된 계산과정을 통해 보다 빠르게 시뮬레이션 하도록 한다. 또한 본 논문에서는 유체의 표면과 강체의 상호작용을 표현하는데 있어서 유체의 항력에 의해서 강체와 충돌 시 발생하는 유체 표면의 움직임을 나타낸다. 본 논문에서 제안하는 자연스러운 유체 표면 모델은 유체역학적 방법을 사용하여 실시간에 사실적으로 표현된다. 그리고 이러한 유체 표면 모델을 PC 환경에서 사용자와 상호작용 가능하도록 재현하여, 게임이나 애니메이션에서의 유체 모델들에도 적용할 수 있다.

• 한국차세대컴퓨팅학회논문지
• /
• 제15권4호
• /
• pp.40-50
• /
• 2019

최근에는 증강 현실 기술과 가상 현실 기술이 사용되는 의료 영상 분야에서 Low-end 시스템에 대한 정확한 인체 모델을 시각화하는 것이 중요하다. 모델의 기하구조를 줄이면 원래 모양과 다른 점이 나타나고 그 차이를 오류로 간주한다. 따라서 기하구조를 축소하면서 오류를 최소화해야 한다. 본 연구에서는 CT 나 MRI 등의 단층 영상에서 인체 장기에 해당하는 영역을 분할하여 3 차원 기하학적 모델을 생성함으로써 다중 해상도의 상세 단계 모델의 재구성 방법을 구현했다. 실험에서 가상 현실 플랫폼은 척추 영역을 재구성한 모델의 모양을 검증하기 위해 구축되었다. 가상 현실 플랫폼을 이용하여 3D 인체 모델과 환자 정보를 확인할 수 있다.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1205-1220
• /
• 2011

The purpose of this study is to verify the change of body posture by putting on the late $19^{th}$ century English women's bodice or waistcoat. This study analyzed the female somatotype which puts on upper garments of Victorian era with using 3D body scan technology. Two sets of $19^{th}$ century women's bodice and waistcoat patterns were developed with the $19^{th}$ century model size and those patterns were used for making the experimental garments. The fit of experimental garments was evaluated by the degree of change with posture and waist measurements. Three women with the same waist girth measurements with the model size were participated to the fitting test. The postural change was measured from cross-sectional body diagrams. The result of this study showed that the waist measurement of the late $19^{th}$ century English women's bodice and waistcoat pattern was smaller than the waist girth measurement. These garments compressed the midriff of the body and it made women's distinct body silhouette. The waist girth measurement of 1876 bodice pattern was 9.2cm smaller than presented model size. The subjects' waist girth measurements were shortened by 5.0~6.1cm after wearing the 1876 bodice garment. The waist girth measurement of 1880 waistcoat pattern was 7.1cm smaller than presented model size. The subjects' waist girth measurements were shortened by 2.7~3.7cm after wearing the 1880 waistcoat garment. The back side parts of their waist were compressed and their postures were changed. The neck and shoulders were moved forward after wearing the experimental garments. These results showed that body posture could be changed to "S" shape silhouette as wearing the late $19^{th}$ century English women's bodice or waistcoat.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권10호
• /
• pp.1633-1641
• /
• 2020

Objective: The objective of this study was to develop a model for estimating the carcass weight of Hanwoo cattle as a function of body measurements using three different modeling approaches: i) multiple regression analysis, ii) partial least square regression analysis, and iii) a neural network. Methods: Data from a total of 134 Hanwoo cattle were obtained from the National Institute of Animal Science in South Korea. Among the 372 variables in the raw data, 20 variables related to carcass weight and body measurements were extracted to use in multiple regression, partial least square regression, and an artificial neural network to estimate the cold carcass weight of Hanwoo cattle by any of seven body measurements significantly related to carcass weight or by all 19 body measurement variables. For developing and training the model, 100 data points were used, whereas the 34 remaining data points were used to test the model estimation. Results: The R² values from testing the developed models by multiple regression, partial least square regression, and an artificial neural network with seven significant variables were 0.91, 0.91, and 0.92, respectively, whereas all the methods exhibited similar R² values of approximately 0.93 with all 19 body measurement variables. In addition, relative errors were within 4%, suggesting that the developed model was reliable in estimating Hanwoo cattle carcass weight. The neural network exhibited the highest accuracy. Conclusion: The developed model was applicable for estimating Hanwoo cattle carcass weight using body measurements. Because the procedure and required variables could differ according to the type of model, it was necessary to select the best model suitable for the system with which to calculate the model.

• 문화기술의 융합
• /
• 제5권4호
• /
• pp.413-420
• /
• 2019

본 연구의 목적은 기존의 body fat mass 변수와 고콜레스테롤혈증의 연관성연구를 벗어나, 머신러닝기법을 기반으로 body fat mass 변수들의 조합을 이용하여 고콜레스테롤혈증 예측 모델을 개발하는 것이다. 이러한 연구를 위하여 국민건강영양조사 데이터를 기반으로 두 가지 variable selection 메소드와 머신러닝 알고리즘을 이용하여 총 6개의 모델을 생성하였고 질병 예측력을 비교분석하였다. 여러 body fat mass 관련 변수들 중에서 몸통지방량 변수가 고콜레스테롤혈증 예측력이 가장 우수한 변수인 것을 밝혀내었고, 머신러닝 기반 예측모델들 중에서 correlation-based feature subset selection 기반 naive Bayes 알고리즘을 이용한 모델이 0.739의 the area under the receiver operating characteristic curve 값과 0.36의 Matthews correlation coefficient 값을 얻었다. 이러한 연구의 결과는 향후 국내외 대규모 스크리닝 및 대중보건 연구에서 질병예측분야의 중요정보로 활용될 것으로 예상한다.

• 한국의류산업학회지
• /
• 제3권5호
• /
• pp.415-422
• /
• 2001

Focusing on working with fashion show as fashion model in South Korea, this study was develop a fashion model typology based on specific model characteristics related demographics and body, job satisfaction/dissatisfaction factors. The survey was done through questionnaire and 194 fashion models were used in the data analysis. The statistical analysis used in this study were frequency, ${\chi}^2$-test, cluster Analysis, MANOVA. ANOVA and Duncan multiple range test. The results of this study were as follows: 1) The majority of sample were as follows: unmarried, college graduate and undergraduate, resident in the Seoul, 20 to 24 yrs old female with 175-177 cm, 52-54 kg, B-W-H (33-24-35 inch). 2) The types of fashion model were classified into 4 types: showing type, lack of professionalism type, matured professionalism type, dissatisfaction with job-environment type. The model segments were profiled on levels of various job related attitude factors, job satisfaction/dissatisfaction, model education, working condition, human relation, regulation discrimination, fashion show stage level, the job of model, body & clothing, and promising job. 3) There were significant differences found between their sex, academic background, guarantee, and in all factors in their job related attitude factors, job satisfaction/dissatisfaction, model education, working condition, human relation, regulation discrimination, fashion show stage level, the job of model, body & clothing, style promising job.

• 보건행정학회지
• /
• 제10권1호
• /
• pp.31-56
• /
• 2000

A purpose of this study is to study on Rene Descartes's mind-body theory in medical aspect. Though Rene Descartes was not so much a doctor as a philosopher, he had health and medical science at heart. When he came into the world in 1596, he was in poor health. Therefore, he suffered from his bad health. Descartes's ideas absolutely colored Western thought for three hundred years, especially, his mind-body theory, mechanistic life-view, and reductionism had important effect on medical study and science of public health. As a rule, we know that his mind-body theory was applicable to mind-body dualism, and his mind-body dualism was connected with biomedical model of medicine. But by this study, his mind-body theory was not only mind-body dualism but also mind-body monoism. And he asserted mind-body interaction too. In other words, he advocated mind-body dualism in scientific aspect, but he knew mind-body monoism from his experence. He confessed this fact to Princess Elizabeth of Bohemia, he wrote mind-body interaction in $\boxDr$Discours de la methode$\boxUl$, $\boxDr$Meditationes de prima philosophia$\boxUl$, and $\boxDr$Traite des passions de 1'ame$\boxUl$ etc. However, only mind-body dualism of his mind-body theories was written in our medical text book, morever mental realm was excluded from the persuit of learning Descartes advocated a mechanistic world-view and mechanistic life-view, he regarded human body as a machine part. And a paticent corresponds to a troubled machine, a doctor deserves a repairman. But this point of view made holistic understanding of man impossible. Descartes divide the whole into basic building blocks, we named the approach Reductionism. Reductionism led to ontological concept in medical science, bacteriology established 'specific cause-specific disease-specific therapy'. We examined medical influence of Descartes's thought, we need to draw out a philosophic basis of medical science and science of public health by a close study of his records.