• 한국환경과학회지
• /
• 제28권2호
• /
• pp.259-266
• /
• 2019

Two main sources of data, meteorological data and land surface characteristics, are essential to effectively run a distributed rainfall-runoff model. The specification and averaging of the land surface characteristics in a suitable way is crucial to obtaining accurate runoff output. Recent advances in remote sensing techniques are often being used to derive better representations of these land surface characteristics. Due to the mismatch in scale between digital land cover maps and numerical grid sizes, issues related to upscaling or downscaling occur regularly. A specific method is typically selected to average and represent the land surface characteristics. This paper examines the amount of flooding by applying the FLO-2D routing model, where vegetation heterogeneity is manipulated using the Manning's roughness coefficient. Three different upscaling methods, arithmetic, dominant, and aggregation, were tested. To investigate further, the rainfall-runoff model with FLO-2D was facilitated in Yongdam catchment and heavy rainfall events during wet season were selected. The results show aggregation method provides better results, in terms of the amount of peak flow and the relative time taken to achieve it. These rwsults suggest that the aggregation method, which is a reasonably realistic description of area-averaged vegetation nature and characteristics, is more likely to occur in reality.

• 한국항공우주학회지
• /
• 제49권4호
• /
• pp.301-309
• /
• 2021

펄스개수측정방법은 반작용휠의 속도를 측정하는 고전적인 방법이다. 본 연구에서는 펄스개수측정방법을 수식으로 표현하였다. 반작용휠의 회전을 속도가 아니라 샘플링 시간 동안의 회전각도로 모델링하였다. 제안된 모델의 유효성은 모델에서 얻어진 펄스개수 변화와 이동평균의 효과가 기존 연구결과와 동일함을 확인하는 방법으로 검증하였다. 이렇게 검증된 모델에 타코펄스 불균일성을 추가하고 펄스개수측정방법의 오차에 대해서 살펴보았다. 불균일성으로 인해서 증가하는 측정오차의 크기를 수식으로 표현하였으며, 측정오차를 상쇄하기 위해서 취해야 하는 이동평균의 개수 조건을 제시하였다.

• Ocean Systems Engineering
• /
• 제12권3호
• /
• pp.359-384
• /
• 2022

We develop in this work a new well-balanced preserving-positivity path-conservative central-upwind scheme for Saint-Venant-Exner (SVE) model. The SVE system (SVEs) under some considerations, is a nonconservative hyperbolic system of nonlinear partial differential equations. This model is widely used in coastal engineering to simulate the interaction of fluid flow with sediment beds. It is well known that SVEs requires a robust treatment of nonconservative terms. Some efficient numerical schemes have been proposed to overcome the difficulties related to these terms. However, the main drawbacks of these schemes are what follows: (i) Lack of robustness, (ii) Generation of non-physical diffusions, (iii) Presence of instabilities within numerical solutions. This collection of drawbacks weakens the efficiency of most numerical methods proposed in the literature. To overcome these drawbacks a reformulation of the central-upwind scheme for SVEs (CU-SVEs for short) in a path-conservative version is presented in this work. We first develop a finite-volume method of the first order and then extend it to the second order via the averaging essentially non oscillatory (AENO) framework. Our numerical approach is shown to be well-balanced positivity-preserving and shock-capturing. The resulting scheme could be seen as a predictor-corrector method. The accuracy and robustness of the proposed scheme are assessed through a carefully selected suite of tests.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.79-89
• /
• 2022

Soil moisture is significantly related to crop growth and plays an important role in irrigation management. To predict soil moisture, various process-based model has been developed and used in the world. Various models (Land surface model) may have different performance depending on the model parameters and structures that causes the different model output for the same modeling condition. In this study, the three land surface models (Noah Land Surface Model, Soil Water Atmosphere Plant, Community Land Model) were used to compare the model performance (soil moisture prediction) and develop the multi-model simulation. At first, the genetic algorithm was used to estimate the optimal soil parameters for each model, and the parameters were used to predict soil moisture in the study area. Then, we used the multi-model approach based on Bayesian model averaging (BMA). The results derived from this approach showed a better match to the measurements than the results from the original single land surface model. In addition, identifying the strengths and weaknesses of the single model and utilizing multi-model methods can help to increase the accuracy of soil moisture prediction.

• 한국해안해양공학회지
• /
• 제4권4호
• /
• pp.201-207
• /
• 1992

Yeo(1987)에 의하여 유도된 평균된 비선형괴의 표현식을 이론 및 실험적 분석을 통하여 난류구조의 특성을 밝혔다. 일반 평균정의식으로부터 가우스형 필터함수를 사용하여 얻어진 이 식에 의하면 종래와 같이 비선형항을 4개의 항으로 분리하여 각각을 해석할 필요가 없으며 기존 난류모형이 갖는 Closure문제로 인한 한계성도 극복할 수 있는 가능공을 보여주고 있다. 새로이 유도된 표현식으로부터 종래 개염적으로만 인식되어 왔던 vortex stretching현상을 이논적으로 도출할 수 있었으며 실제 난류자료의 분석결업 이들의 영향이 지배적임을 입증하였다. 따라서 vortex stretching의 영향을 무시한 난류모형은 그 타당성을 상설하게 된다. 또한 LES모형에 적용시킨 결과 일반적 형태의 에너지 표현식을 얻을 수 있었으며 기존의 Smagorinsky모형, 회전모형및 SGS에너지 모형은 완전히 별개의 것이 아니라 난류에너지 중 변형 및 회전에 의한 영향의 고려 가부에 따라 구분되어짐을 보였다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.444-457
• /
• 2014

This paper presents the design and realization of a digital PV simulator with a Push-Pull Forward (PPF) circuit based on the principle of modular hardware and configurable software. A PPF circuit is chosen as the main circuit to restrain the magnetic biasing of the core for a DC-DC converter and to reduce the spike of the turn-off voltage across every switch. Control and I/O interface based on a personal computer (PC) and multifunction data acquisition card, can conveniently achieve the data acquisition and configuration of the control algorithm and interface due to the abundant software resources of computers. In addition, the control program developed in Matlab/Simulink can conveniently construct and adjust both the models and parameters. It can also run in real-time under the external mode of Simulink by loading the modules of the Real-Time Windows Target. The mathematic models of the Push-Pull Forward circuit and the digital PV simulator are established in this paper by the state-space averaging method. The pole-zero cancellation technique is employed and then its controller parameters are systematically designed based on the performance analysis of the root loci of the closed current loop with $k_i$ and $R_L$ as variables. A fuzzy PI controller based on the Takagi-Sugeno fuzzy model is applied to regulate the controller parameters self-adaptively according to the change of $R_L$ and the operating point of the PV simulator to match the controller parameters with $R_L$. The stationary and dynamic performances of the PV simulator are tested by experiments, and the experimental results show that the PV simulator has the merits of a wide effective working range, high steady-state accuracy and good dynamic performances.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.979-987
• /
• 1999

In a high precision vertical machining center, the estimation of cutting forces is important for many reasons such as prediction of chatter vibration, surface roughness and so on, and cutting forces are difficult to predict because they are very complex and time variant. In order to predict the cutting forces of end-milling process for various cutting conditions, a mathematical model is important and this model is based on chip load, cutting geometry, and the relationship between cutting forces and chip loads. Specific cutting force coefficients of the model have been obtained as interpolation function types by averaging farces of cutting tests. In this paper, the coefficients are obtained by neural network and the results of the conventional method and those of the proposed method are compared. The results show that the neural network method gives more correct values than the function type and that in teaming stage as the omitted numbers of experimental data increases the average errors increase.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.66-74
• /
• 1997

In a high speed and high precision vertical machining center, chatter vibration is easily generated due to unbalanced masses in rotating parts and changtes of cutting forces. In this paper, modal test is performed to obtain modal parameters of the vertical machining center. In order to predit the cutting force of endmilling process for various cutting conditions, a mathematical model is given and this model is based on chip load, cutting geometry, and relationship between cutting forces and the chip load. Specific cutting constants of the model are obtained by averaging forces of cutting tests. The interactions between the dy- namic characteristics and cutting dynamics of the vertical machining center make the primary and the secondary feedback loops, and we make use of the equations of system to predict the chatter vibration. The chatter prediction is formulated as linear differential-differene equations, and simulated for several cases. Trends of vibration as radial and axial depths of cut are changed are shown and compared.

• Composites Research
• /
• 제15권6호
• /
• pp.30-37
• /
• 2002

꼰 섬유(twisted yarn)로 이루어진 복합재료의 탄성계수를 예측하기 위한 강성모델을 제시하였다. 이 모델은 단위 셀 구조를 바탕으로 하여 좌표변환과 구성 재료의 연성 상수를 체적 평균함으로써 복합재료의 탄성계수를 예측하는 방법이다. 해석적인 결과와 실험치와의 비교를 위하여 두 종류의 꼬임 각을 가지는 섬유로 구성된 복합재료에 대한 시험을 하였으며 인장, 압축, 전단 강도와 탄성계수를 구하였다. 이 시험편은 유리섬유 및 에폭시 수지를 사용한 RTM 성형법으로 제조하였다. 탄성계수에 대한 비교 곁과 예측치와 실험치는 비교적 잘 일치하였다. 이 모델에 의해 구해진 3차원적인 탄성계수 값은, 꼬인 섬유로 이루어진 직조형 복합재료 구조물의 구조해석을 위한 기본 물성치 입력값으로 사용될 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1431-1438
• /
• 2007

This paper presents a refined design model for current railroad design code on concrete structures exposed to marine environment. A time-varying diffusion coefficient(D) as well as surface chloride$(C_S)$ and chloride threshold level$(C_{lim})$ are studied. Averaging value of the D with time over exposed duration were used to refined durability design model to consider time dependent characteristic of D. The values for $C_S$ and $C_{lim}$ for the seashore in Korea revised for realistic durability design. The proposed model was verified by the so-called performance-based durability design, which is widely used in recent durability design code. Results show that the current standard specification underestimates durability performances of concrete structures exposed to marine environment, so that the cover depth design using current durability evaluation in the standard specifications is very much conservative. Thus, it is found that proposed durability design models for the railroad design code for railway concrete structures can be used effectively for service life design of concrete structures in marine environment.