• The Journal of the Korea Contents Association
• /
• v.14 no.9
• /
• pp.589-597
• /
• 2014

The increasing demand for various mobile telecommunication services calls for more spectrum resource. Considering the scarcity of spectrum resource and the difficulties of development of higher frequency band, the unique way to meet the increasing demand is to maximize the utilization efficiency of the current spectrum resource. Under the circumstances, various spectrum sharing plans have been in recent studies to dissolve the excess spectrum demand. In addition, spectrum efficiency measurement methods become more important to verify the effectiveness of spectrum sharing and estimate the performance of various wireless systems. Our research addresses measurement methods to estimate spectrum utilization efficiency in a rational manner. Based on ITU-R recommendations, various measuring methods for spectrum utilization efficiency are reviewed. Then a queueing based approach is newly presented as alternatives to the current models. By using the proposed model, the spectrum efficiency increment with the adoption of spectrum sharing plans can be estimated more properly.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.2 s.308
• /
• pp.81-92
• /
• 2006

This paper proposes a robustness watermarking for 3D mesh model based on projection onto convex sets (POCS). After designing the convex sets for robustness and invisibility among some requirements for watermarking system, a 3D-mesh model is projected alternatively onto two constraints convex sets until the convergence condition is satisfied. The robustness convex set are designed for embedding the watermark into the distance distribution of the vertices to robust against the attacks, such as mesh simplification, cropping, rotation, translation, scaling, and vertex randomization. The invisibility convex set are designed for the embedded watermark to be invisible. The decision values and index that the watermark was embedded with are used to extract the watermark without the original model. Experimental results verify that the watermarked mesh model has invisibility and robustness against the attacks, such as translation, scaling, mesh simplification, cropping, and vertex randomization.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.27-36
• /
• 2006

Lossless data embedding is a method to insert information into a host image that guarantees complete restoration when the extraction has been done. In this paper, we propose a noble reversible data embedding algorithm for images in wavelet domain. The proposed embedding technique, which modifies histogram of wavelet coefficient, is composed of two inserting steps. Data is embedded to wavelet coefficient using modification of histogram in first embedding process. Second embedding step compensates the distortion caused by the first embedding process as well as hides more information. Hence we achieve higher inserting capacity. In view of the relationship between the embedding capacity and the PSNR value, our proposed method shows considerably higher performance than the current reversible data embedding methods.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.42-49
• /
• 2000

A major technical issue related to supporting multiple classes of service in IMT-2000 is the efficient management of limited channel. The selection of channel access control technique has a significant impact on user QOS, system capacity, and is therefore an important design parameter. In this paper, to achieve the service at resonable QOS level, while utilizing channel resource effectively, some improved methods are proposed by analyzing of the recently released methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.121-127
• /
• 2008

This paper presents an electric field distribution in a reverberation chamber using cylindrical diffuser. The characteristics of electric field distributions are compared with QRD(Quadratic Residue Diffuser) and cylindrical diffuser for $1{\sim}3$ GHz frequency band. The FDTD(Finite-Difference Time-Domain) method is used to analyze the field characteristics, and the field uniformity. At 2 GHz, the standard deviation and the tolerance of test volume in the reverberation chamber are improved by 0.11 dB, 0.43 dB for the case of cylindrical diffuser. The field strength is increased by 43.2 dBmV/m vs QRD's of 36.6 dBmV/m. Comparing with QRD's, the characteristic of polarization is also improved. These results show that reverberation chamber using cylindrical diffuser can be used alternative facility for measurement of electromagnetic interference and immunity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12B
• /
• pp.1115-1123
• /
• 2003

In this paper, a remote control system called TeleRemote system which can be applied to existing wireless mobile networks or public telephone networks for remote control is designed and implemented. The proposed design employs program technology based on the theory of signal detect control and enables the EPG(Electronic Program Guide) functions such as recording reservation of bidirectional video signals with TV reception card on PC. It can also control recording reservation using remote control program through telecommunication network The PC-EPG system is implemented in Web programs with Server/Clinet architecture and the server system that provides EPG functionalities is in charge of recording reservations and data communications by means of the scheduler program. Data storing to client PCs is performed through TCP/IP and finished by client programs implemented using Visual C++/MFC programs. As remote control system, the developed system can be used for unmanned security system using the Web camera. Building intranet and making connection to internet, the TeleRemote system is believed to create potential for commercial communication system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.722-724
• /
• 2010

CAS(Conditional Access System) was developed for paid-for service in cable and fixed satellite broadcast system and technology and market maturity are high. However, these assessment is limited by CAS in fixed broadcasting system. In case of digital mobile broadcast such as T-DMB is difficult to apply CAS technology of fixed broadcasting system because of a use method and technology characteristic. Expecially, in case T-DMB using limited resources, a CAS message which must transmit in each service channel can cause problems. It is desirable that system transmits the CAS message which transmitted by each service channel through logical CAS message-only channel. In order to make a logical CAS message channel, we need a multiplexing techniques for CAS message using in each channel. In this paper, we design the CAS message multiplexing techniques for composition of CAS message-only channel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.80-80
• /
• 2000

Surface acoustic wave (SAW) devices have become more important as mobile telecommunication systems need h호-frrequency, low-loss, and down-sized components. Higher-frequency SAW divices can be more sasily realized by developing new h호-SAW-velocity materials. The ZnO/diamond/Si multilasyer structure is one of the most promising material components for GHz-band SAW filters because of its SAW velocity above 10,000 m/sec. Silicon carbide is also a potential candidate material for high frequency, high power and radiation resistive electronic devices due to its superior mechanical, thermal and electronic properties. However, high price of commercialized 6- or 4H-SiC single crystalline wafer is an obstacle to apply SiC to high frequency SAW devices. In this study, single crystalline 3C-SiC thin films were grown on Si (100) by MOCVD using bis-trimethylsilymethane (BTMSM, C7H20Si7) organosilicon precursor. The 3C-SiC film properties were investigated using SEM, TEM, and high resolution XRD. The FWHM of 3C-SiC (200) peak was obtained 0.37 degree. To investigate the SAW propagation characteristics of the 3C-SiC films, SAW filters were fabricated using interdigital transducer electrodes on the top of ZnO/3C-SiC/Si(100), which were used to excite surface acoustic waves. SAW velocities were calculated from the frequency-response measurements of SAW filters. A generalized SAW mode. The hard 3C-SiC thin films stiffened Si substrate so that the velocities of fundamental and the 1st mode increased up to 5,100 m/s and 9,140 m/s, respectively.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.207-215
• /
• 2013

The general opinion about the notion of cyberbullying hasn't existed yet, but in related laws it is defined as the entire behavior causing the counterpart to suffer the pain by continuously and repeatedly psychologic offending toward specific students with information and telecommunication products such as the Internet and mobile phones, and spreading the private information or false facts related with specific students. Recently a number of accidents related with abuse of cyberbullying are being broadcast on a variety of mass media, and the argument about the severity and countermeasures against cyberbullying is moving onward. This study has a purpose as suggesting the practical alternatives to prevent cyberbullying victim of middle school students by arguing cyberbullying of middle school students and analyzing the relationship between the general features such as victimized experience and frequency and the emotional behaviors according to victimized experience. As the result of this study, cyberbullying victimized experience has a significant effect on the emotional behavior such as depression, aggression, and academic stress. As political implication, this study suggests the practical alternatives to prevent cyberbullying of middle school students based on the analysis result.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.962-977
• /
• 2019

The human voice is a convenient method of information transfer between different objects such as between men, men and machine, between machines. The development of information and communication technology, the voice has been able to transfer farther than before. The way to communicate, it is to convert the voice to another form, transmit it, and then reconvert it back to sound. In such a communication process, a vocoder is a method of converting and re-converting a voice and sound. The CELP (Code-Excited Linear Prediction) type vocoder, one of the voice codecs, is adapted as a standard codec since it provides high quality sound even though its transmission speed is relatively low. The EVRC (Enhanced Variable Rate CODEC) and QCELP (Qualcomm Code-Excited Linear Prediction), variable bit rate vocoders, are used for mobile phones in 3G environment. For the real-time implementation of a vocoder, the reduction of sound quality is a typical problem. To improve the sound quality, that is important to know the size and shape of noise. In the existing sound quality improvement method, the voice activated is detected or used, or statistical methods are used by the large mount of data. However, there is a disadvantage in that no noise can be detected, when there is a continuous signal or when a change in noise is large.This paper focused on finding a better way to decrease the reduction of sound quality in lower bit transmission environments. Based on simulation results, this study proposed a preprocessor application that estimates the SNR (Signal to Noise Ratio) using the spectral SNR estimation method. The SNR estimation method adopted the IMBE (Improved Multi-Band Excitation) instead of using the SNR, which is a continuous speech signal. Finally, this application improves the quality of the vocoder by enhancing sound quality adaptively.