• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.1-6
• /
• 2007

Boiling-in-oil process was performed to investigate the high-temperature drying characteristics of 25, 50, and 70 mm-thick flat-sawn Douglas-fir lumber. Drying rates, moisture profiles and temperature profiles were monitored. Fully refined paraffin wax was used as drying agent and heated to $130^{\circ}C$. Average drying rates of 25, 50, and 70 mm-thick specimen were 11.6, 6.7, 5.0%/h, respectively. The moisture content differences between cores and ends were 1~2% in 25 mm-thick and 200 mm-long sample and over 10% in 50 mm-thick and 600 mm-long sample.

• Restorative Dentistry and Endodontics
• /
• v.14 no.2
• /
• pp.99-102
• /
• 1989

Thirty mandibular first molars were fixed, decalcified, washed and embedded in paraffin to observe the root canal size and morphology at apical 5mm area. The results were as follows 1. The 55% of mesial canals were single-canaled at apical 5mm area, but 95% of distal canals were single-canaled. 2. The morphology of canal at apical 5mm area were varied, most of them were round or ovoid and 8-shaped. 8-shapes of them were long, slender or long, thick. 3. The size of mesial canal was $1.8{\pm}0.2$, $0.6{\pm}0.1mm$, but that of distal canal was $1.0{\pm}0.2$, $0.6{\pm}0.1mm$ each.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.6
• /
• pp.443-448
• /
• 2001

This study was carried out to obtain the basic informations on the characteristics of gametophytes formation and microspore germination in Astragalus membranaceus Bunge. Pollen mother cells passed through meiosis when the flower bud length reaches around 3.5 mm, thus creating the tetrad when it is 4.0 mm long. Pollen attains full growth when the bud is about 10.0 mm long and the anther is found to dehisce when the length of tate bud reach around 12.0 mm. Embryo sac develops at a similar speed as pollen did and it attains its full growth when the bud is about 10-12 mm long. After being stored at 4$^{\circ}C$ or -4$^{\circ}C$, the pollen maintained its germination ability to almost full extent by the 30th day after store. However, the germination rate at room temperature (23~28$^{\circ}C$) decreased below 3％ by the 3rd day of storage and so did the germination speed.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.115-125
• /
• 2021

This study surveyed the population ecology of Acheilognathus chankaensis (Pisces: Acheilognathinae) in the vicinity of the Churyeongcheon (Stream) and Seomjingang (River) in Jeonbuk, Korea, from February 2006 to May 2007. The survey found the habits mainly in the slow-flowing waters having sand, mud, and gravel bottoms. Age groups estimated by the standard length-frequency distribution of the population indicated that the one-year-olds were 30-46 mm long, the two-year-olds were 47-58 mm long, the three-year-olds were 59-68 mm long, and the four-year-olds were longer than 69 mm. The gonadosomatic index (GSI) and the ratio of ovipositor length/standard length were the highest in March (♀: 12.9%, ♂: 5.0%) and in April (46.3%), respectively. The ratio of mature egg diameters that were 1.6 mm was highest in May (13.2%). The comprehensive analysis of spawning characteristics showed that the spawning season was from March to June with water temperatures in 11.5-22.5℃, and the sex ratio of female:male was 1:1.13. The fecundity in the ovaries and the number of mature eggs were 318±174.5 (50~583) and 220±139.2 (50~406), respectively. The size of the mature eggs was 2.04±0.110 mm on the long axis and 1.55±0.100 mm on the short axis for the study period. Gut contents of A. chankaensis were mainly phytoplankton such as the genera Fragilaria, Synedra, Navicular, Cymbella (Bacillariophyceae), and Cosmarium (Chlorophyceae).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.26-26
• /
• 2009

Vertically aligned arrays of mm-long multi-walled carbon nanotubes (MWCNTs) on Si substrates have been synthesized by water-assisted thermal chemical vapor deposition (CVD). The growth of CNTs was investigated by changing the experimental parameters such as growth temperature, growth time, gas composition, annealing time, catalyst thickness, and Al underlayer thickness. The 0.5-nm-thick Fe served as catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. We grew CNTs by adding a little amount of water vapor to enhance the activity and the lifetime of the catalyst. Al was very good at producing the nm-size catalyst particles by preventing "Ostwald ripening". The Al underlayer was varied over the range of 15~40 nm in thickness. The optimum conditions for the synthesis parameters were as follows: pressure of 95 torr, growth temperature of $815^{\circ}C$, growth for 30 min, 60 sccm Ar + 60 sccm $H_2$ + 20 sccm $C_2H_2$. The water vapor also had a great effect on the growth of CNTs. CNTs grew 5.03 mm long for 30 min with the water vapor added while CNTs were 1.73 mm long without water vapor at the same condition. As-grown CNTs were characterized by using scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. High-resolution transmission electron microscopy showed that the as-grown CNTs were of ~3 graphitic walls and ~6.6 nm in diameter.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.119-125
• /
• 2010

In order to demonstrate the value of long-distance radiography, we have studied how distance affects images in chest frontal radiography and compared short-distance and long-distance images in chest lateral radiography. Cardiothoracic ratio(CTR %) of 50 patients with no disease in the chest(10 each at the age of 20~60) were evaluated in Supine AP(100 cm), Sitting AP(100 cm), Sitting AP(180 cm), and Erect PA(180 cm). In lateral radiography, we evaluated and compared left lateral radiography(100 cm and 180 cm) of the patients based on the horizontal maximum of the heart. The average value of CTR(%) were 0.48 in Erect PA(180 cm), 0.52 in Supine AP(100 cm), 0.50 in Sitting AP(100 cm), 0.49 in Sitting AP(180 cm), which were Supine AP(100 cm) > Sitting AP(100 cm) > Sitting AP(180 cm) > Erect PA(180 cm). The average value of Maximum transverse diameter of left of the cardiac(MLD), which showed how much axis of spine was slanted to the left, was 90.67 mm in Erect PA(180 cm), 103.92 mm in Supine AP(100 cm), 93.54 mm in Sitting(100 cm), 89.84 mm in Sitting AP(180 cm), 58.11 mm in the minimum value and 118.79 mm in the maximum value. The average value of Maximum transverse diameter of right side of the cardiac(MRD), which suggested how much axis of spine was slanted to the right, was 47.18 mm in Erect PA(180 cm), 48.12 mm in Supine AP(100 cm), 44.98 mm in Sitting AP(180 cm), and the minimum value 26.84 mm and the maximum value 65.30 mm. There was no standard method to calculate; therefore, the horizontal maximum of the heart was used for lateral radiography. The average value was 121.07 mm in 100 cm and 109.76 mm in 180 cm. Sitting AP(180 cm) among the types was closest to C-PA(180 cm). As a result, during C-AP radiography, long-distance radiography lessened shadow of the heart more than that of short distance, Sitting position more than Supine position.

• The Korean Journal of Soil Zoology
• /
• v.4 no.2
• /
• pp.89-100
• /
• 1999

Four new and a known spacies of the order Mononchida were described and illustrated. Iotonchus obtusus sp. n. was 2.8 mm long, a=33, b=4.2, c=61, V=68%, buccal cavity=61${\times}$45 mm, and is characterized by having basally situated dorsal tooth, presence of vulval papillae and in having short, hemispherical tail with thick cuticle at terminus. Miconchus vulvapapillatum sp. . was 2.7-3.6 mm long, a=29-36, b=4.1-4.5, c=18.4-21, V=65-69%, buccal cavity=53-61${\times}$29-33 mm, spicules=132-137 mm, ventromedian supplements 28-31, and was characterized by having 5-8 pre- and post vulval papillae in contiguous series, and three pairs of vulval glands. Clarkus koreanus sp. n. was 1.1-1.3 mm long, a=27.5-28.8, b=3.5-3.9, c=12-14.5, V=60-64%, buccal cavity=24-28${\times}$13.5-15 mm, and was characterized by well offset lip region, amphids situated well below to dorsal tooth apex, and vulva elevated, with vulval flap. Coomansus ulsani sp. n. was 1.2-1.5 mm long, a=23.5-26, b=3.4-3.8, c=13.6-14.8, V=65-68%, buccal cavity=36-39${\times}$21-23 mm and was characterized by well offset lip region and a thin longitudinal ridge on vertical walls of stoma.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.225-228
• /
• 2005

We have grown the long persistent $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ phosphor single crystal by Verneuil method. The obtained single crystals were long persistent phosphorescence peaking at ${\lambda}=520nm$ with a size of about 5 mm diameter, 55 mm length. The melting temperature of $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ measured $T_{mp}=1968^{\circ}C$. The optimum composition was $SrCO_3:Al(OH)_3:Eu_2O_3:Dy_2O_3$ = 1 : 2 : 0.015 : 0.02. Flow rate of $H_2:O_2$ is about 4 : 1. Growthing rate is about 5 mm/hr. The spectra of the phosphorescence from the crystals are quite similar to those obtained with sintered powders used for luminous pigments. The crystalline structure of long persistent $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ phosphor single crystal was determined by X-ray diffraction.

• Korean Journal of Food Science and Technology
• /
• v.22 no.4
• /
• pp.398-404
• /
• 1990

This study was carried out for investigation of morphological characteristics and for analysis of the relationships between morphological indices and proximate compositions of the recommended soybean varieties in Korea. The weight of 100 seeds and weight percentages of seed coat and germ to the whole soybean of 19 varieties were ranged from 12.28 to 25.54g, from 6.02 to 8.29% and from 1.66 to 3.35%, respectively. The average long and short widths and length were $5.95{\sim}7.59mm,\;5.03{\sim}6.95mm\;and\;6.44{\sim}8.38mm$, respectively. The Hunter b values(yellowness) ranged from 15.9 to 21.7 for seed coat and from 17.7 to 23.1 for cotyledon. From the statistical analysis, a strong positive correlation(r>0.97) existed between total weight and cotyledon weight and long width, and between cotyledon weight and long width. Protein content had low correlations(r<0.48) with total weight, cotyledon weight, length and long width.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.72-77
• /
• 2018

This paper presents the FEM analysis results on the strength safety of LPG fuelling nozzle, which is composed of ball valve and long cylinder tube. For the strength safety analysis of LPG fuelling Nozzle, the gas pressure of 0.5~3.5MPa has been supplied to the ball valve and long cylinder tube bodies with the wall thickness of 1.7~3.5mm. The maximum von Mises stress of the ball valve with 1.7mm wall thickness is 25.4MPa for the supply gas pressure of 3.5MPa, which is 25.9% compared with that of the yield stress of the brass. And the maximum von Mises stress was 23.7MPa when a 3.5MPa gas pressure was applied to a long cylinder tube with a wall thickness of 1.7mm, which was 6.7% more safe than the ball valve which was analyzed under the same conditions. For the increased wall thickness, 2.0mm of the long cylinder tube, the maximum von Mises stress of 20.2MPa is 14.8% more safe compared with that of 1.7mm wall thickness of the same cylinder tube. Thus, the wall thickness of the ball valve and cylinder tube is recommended as an optimized thickness of 1.7~2.0mm for the strength safety of the LPG fuelling nozzle.