• Coupled systems mechanics
• /
• v.12 no.6
• /
• pp.539-555
• /
• 2023

Although some prediction models have successfully developed for ultra-high performance concrete (UHPC), they do not provide insights and explicit relations between all constituents and its consistency, and compressive strength. In the present study, based on the experimental results, several mathematical models have been evaluated to predict the consistency and the 28-day compressive strength of UHPC. The models used were Linear, Logarithmic, Inverse, Power, Compound, Quadratic, Cubic, Mixed, Sinusoidal and Cosine equations. The applicability and accuracy of these models were investigated using experimental data, which were collected from literature. The comparisons between the models and the experimental results confirm that the majority of models give acceptable prediction with a high accuracy and trivial error rates, except Linear, Mixed, Sinusoidal and Cosine equations. The assessment of the models using numerical methods revealed that the Quadratic and Inverse equations based models provide the highest predictability of the compressive strength at 28 days and consistency, respectively. Hence, they can be used as a reliable tool in mixture design of the UHPC.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.117-126
• /
• 2001

Tribological properties of high temperature fade were investigated by changing relative amounts of ingredients in the brake friction material. Based on a simple experimental formulation containing 10 ingredients, friction materials were tested using a pad-on-disk type friction tester. Twenty-five friction material specimens with different relative amounts of the ingredients were manufactured according to the constrained mixture design .The difference ($\Delta$${\mu}$=${\mu}$$\sub$max/. -${\mu}$$\sub$min/. ) of friction coefficients was measured to represent the high temperature fade. Results from elevated temperature tests showed that five ingredients including cashew, graphite, Sb$_2$S$_3$, ZrSiO$_4$, and Cu fibers played important roles on $\Delta$${\mu}$. In order to find relative importance on fade phenomena among these ingredients, ANOVA(analysis of variance) was performed in this investigation. Thirty-two friction material specimens by changing ${\pm}$50vol.％ of these five ingredients were tested to examine the relative importance. Results showed that cashew, graphite '||'&'||' Sb$_2$S$_3$, and cashew '||'&'||' graphite aggravated the fade behavior and Cu fibers improved on fade resistance.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.173-176
• /
• 2010

A subscale gas generator was designed and manufactured to understand a reason for increased pressure drop of liquid oxygen injectors observed in a technology demonstration model of a 75 ton-class gas generator. A total of 6 hot-firing tests were successfully performed including experimental conditions of design and off-design points. The hot-firing results showed that discharge coefficients of fuel and liquid oxygen remained constant as the mixture ratio varied at a fixed chamber pressure. At a fixed mixture ratio, it was also found that discharge coefficients of fuel and liquid oxygen was constant as the chamber pressure was increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.641-648
• /
• 2006

In an attempt to get basic data for the utilization of saltwort powder (Salicornia herbaceae L.) as a ingredient in the Sulgidduk. D-optimal design of mixture design showed 14 experimental points including 4 replicates for three independent variables. The three independent variables selected for the experiment were water ($13{\sim}18%$), saltwort powder ($2{\sim}6%$), and sugar ($8{\sim}13%$). The optimum responses variables such as color value. texture, and sensory characteristics were evaluated. The compositional and functional properties of test were measured, and these values were applied to the mathematical models. According to the result of measuring probability of the color value, texture and sensory characteristics were respectively and significance was acknowledged (p<0.05). According to the result of F-test, color values (L, a, b), textural properties (gumminess, chewiness) and sensory characteristics (taste, softness) decided linear model, textural property (hardness) and sensory characteristics (color, smell, moistness, overall acceptance) decided quadratic model. A canonical form and trace plot showed that the influence of each ingredient on the mixture final product. An optimum formulation by numerical and graphical methods were similar. Water, saltwort powder, and sugar were 15.2%, 3.0%, and 9.8% respectively by numerical method, and 15.2%, 3.1%, and 9.7% respectively by graphical method.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.250-253
• /
• 2003

This paper concerns about an experimental investigation about steering performance of tracked vehicle on extremely soft soil based on DOE(Design Of Experiment) using L8 orthogonal Array. A tracked vehicle model with principal dimensions of $0.9m{\times}0.8m{\times}0.4m$ and weight 167kg was constructed with a pair of driving chain links driven by two AC-servo motors. The tracks are configured with detachable grousers, the span of which can be varied. Deep seabed was simulated by means of bentonite-water mixture in a soil bin of $6.0m{\times}3.7m{\times}0.7m$. Turning radii of vehicle and torques of motors were measured with respect to experimental variables; steering ratio, driving speed, grouser chevron angle, grouser span, grouser height. The effects of experiment variables on steering performance are evaluated.

• Journal of Korean Biological Nursing Science
• /
• v.16 no.4
• /
• pp.334-341
• /
• 2014

Purpose: The purpose of this study was to examine the effects of aroma-necklace application on perceived stress, symptoms of stress and changes in autonomic nervous system among nursing students in clinical training. Methods: A research design for this study was a non-equivalent control group, non-synchronized pre-post test. The experimental group (n=39) underwent aroma inhalation by necklace which contains an essential oil mixture of lavender and sweet orange mixture in ratio of 2:1 for 2 weeks while the control group (n=36) received placebo therapy. The data were collected using self-administered questionnaires and measurement of heart rate variability (HRV) and analyzed using the PASW 18.0 program. Results: The perceived stress scores and scores of peripheral manifestations in the experimental group were significantly lower than those of the control group. All indices of HRV were significantly different between the two groups. LF norm and LF/HF ratio in the experimental group were significantly lower than those of the control group, and HF norm in the experimental group was significantly higher than that in the control group. Conclusion: It can be suggested that aroma-necklace application was effective in decreasing perceived stress and peripheral manifestations of stress and in changing HRV indices among nursing students in clinical training.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1051-1060
• /
• 2003

The heat and mass transfer on two kinds of tube surfaces (bare stainless steel tube and Teflon coated tube) in steam-air mixture flow are experimentally studied to obtain design data for the heat exchanger of the latent heat recovery from flue gas. In the test section, 3-tubes are horizontally installed, and steam-air mixture is vertically flowed from the top to the bottom. The pitch between tubes is 67mm, the out-diameter of tube is 25.4mm, and the thickness is 1.2mm ; blockage factor (cross sectional tube area over the cross sectional area of the test section) is about 0.38. All of sensors and measurement systems (RTD, pressure sensor, flow-meter, relative humidity sensor, etc.) are calibrated with certificated standard sensors and the uncertainty for the heat transfer measurement is surveyed to have the uncertainty within 7%. As experimental results, overall heat transfer coefficient of the Teflon (FEP) coated tube is degraded about 20% compared to bare stainless tube. The degradation of overall heat transfer coefficient of Teflon coated tube comes from the additional heat transfer resistance due to Teflon coating. Its magnitude of heat transfer resistance is comparable to the in-tube heat transfer resistance. Nusselt and Sherwood numbers on Teflon (FEP) coated surface and bare stainless steel surface are discussed in detail with the contact angles of the condensate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.505-511
• /
• 2008

This study was carried out to investigate the antioxidative effect of Kochujang seasoning sauce with the addition of fruit and vegetable extract (FVE) for pork Bulgogi, as well as to establish the optimum mixture ratio of ingredients using mixture experimental design (MED). During 5 months of storage at $-25^{\circ}C$, the thiobarbituric acid (TBA) values of the seasoned pork containing soy sauce (control), Kochujang added group (KG) and Kochujang and FVE added group (KFVEG) were remarkably lower than that of unseasoned pork. Among the seasoned porks, the antioxidative effect of KG was much higher than the control. Moreover, TBA values of KFVEG were significantly lower than those of KG. Therefore, the lipid oxidation stability of seasoned pork Bulgogi was improved by the addition of Kochujang, red pepper powder and FVE into the seasoning sauce. When Kochujang was used in seasoning sauce, the preference scores of pork Bulgogi increased with the increasing amount of red pepper powder and FVE. The optimum mixture ratios of seasoning sauce for pork Bulgogi established by the MED were Kochujang 0.04, red pepper powder 0.20, FVE 0.39 and water 0.37.

• Journal of Korea Game Society
• /
• v.6 no.1
• /
• pp.3-10
• /
• 2006

In computer games, the level design and balance of characters are the key features for developing interesting games. Level designers make decision to change the parameters and opponent behaviors in order to avoid the player getting extremely frustrated with the improper level. Generally, opponent behavior is defined by static script, this causes the games to have static difficulty level and static environment. Therefore, it is difficult to keep track of the user playing interest, because a player can easily adapt to changeless repetition. In this paper, we propose a dynamic scripting method that able to maintain the level designers' intention where user enjoys the game by adjusting the opponent behavior while playing the game. The player's countermeasure pattern for dynamic level design is modeled using a Gaussian Mixture Model (GMM). The proposed method is applied to a shooting game, and the experimental results maintain the degree of interest intended by the level designer.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.79-86
• /
• 2022

With the recent increase in the demand for electric vehicles, it is necessary to identify the high current safety of automobile parts. Among the automobile parts, the EPDM parts required colored parts from the existing black; therefore, it was necessary to change the basic filler from carbon black to silica. The rubber used in automobile parts is flexible and exhibits basic characteristics of high strength and elongation. However, as the filler is changed to silica, its physical properties, such as tensile strength and elongation, are lower than those of the existing carbon black base. Therefore, it is necessary to evaluate the mechanical properties with the addition of the EPDM compound using silica as a base without degrading the physical properties of EPDM. In this study, an experiment based on the additive content was performed using the mixture experimental planning method to analyze the mechanical properties according to the additive type and mixing ratio of silica-based EPDM. The mixing ratio of the four additives was set using a simplex lattice design, and the tensile strength, elongation, modulus 300%, and permanent compression reduction rate were analyzed for mechanical characteristics, and rheometer experiments were performed for vulcanization characteristics. Through statistical analysis of the measured data, the main effects and interactions of the EPDM-blended rubber additives were analyzed. These results can be used to derive a mixing ratio of additives that satisfies the required characteristics of the EPDM compound.