• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2005년도 춘계학술발표논문집
• /
• pp.306-308
• /
• 2005

염분농도에 따른 발아특성은 쪽제비싸리, Perennial ryegrass의 경우 $0.4\%$ 이상 NaCl 농도에서 발아율과 유아 및 유근 길이가 급격히 감소하였으며, Creeping red fescue는 $0.2\%$ 이상 NaCl 농도에서 매우 급격한 생육저하가 일어났다. 외래초종의 초장 분석결과 Mixture III> Mixture IV> Mixture II> Mixture I의 순이었고, 재래 초$\cdot$목본의 경우는 외래초종의 초장이 길수록 길이가 짧아지는 경향을 나타냈으며, Mixture I> Mixture II> Mixture IV> Mixture III의 순이었다.

• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.585-595
• /
• 2001

A series of experiments have been carried out to investigate the effects of non-condensable gas on the direct contact film condensation of vapor mixture under an adiabatic wall condition. The average heat transfer coefficient of the direct contact condensation was obtained at the atmospheric pressure with four main parameters ; air-mass fraction, mixture velocity, film Reynolds number, and the degree of water film subcooling having an influence on the condensation heat transfer coefficient. With the analysis of 88 experiments, a correlation of the average Nusselt number for direct contact film condensation of steam/air mixture at an adiabatic vertical wall was proposed as functions of film Reynolds number, mixture Reynolds number, air mass fraction, and Jacob number. The average heat transfer coefficient for steam/air mixture condensation decreased significantly while air mass fraction increased. The average heat transfer coefficients also decreased as the Jacob number increased, and were scarcely affected by the film Reynolds number below a mixture Reynolds number of about 245,000.

• 음성과학
• /
• 제10권4호
• /
• pp.149-157
• /
• 2003

In this paper, we proposed the principal component analysis (PCA) fuzzy mixture model for speaker identification. A PCA fuzzy mixture model is derived from the combination of the PCA and the fuzzy version of mixture model with diagonal covariance matrices. In this method, the feature vectors are first transformed by each speaker's PCA transformation matrix to reduce the correlation among the elements. Then, the fuzzy mixture model for speaker is obtained from these transformed feature vectors with reduced dimensions. The orthogonal Gaussian Mixture Model (GMM) can be derived as a special case of PCA fuzzy mixture model. In our experiments, with having the number of mixtures equal, the proposed method requires less training time and less storage as well as shows better speaker identification rate compared to the conventional GMM. Also, the proposed one shows equal or better identification performance than the orthogonal GMM does.

• 품질경영학회지
• /
• 제39권3호
• /
• pp.400-411
• /
• 2011

Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components-process variables experiments depend on the mixture components-process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. In this paper we propose three starting models for the mixture components-process variables experiments. One of the starting model we are considering is the model which includes product terms up to cubic order interactions between mixture effects and the linear & pure quadratic effect of the process variables from the product model. In this paper, we propose a method for finding robust designs and practical designs with respect to D-, G-, and I-optimality for the various starting combined models and then, we find practically efficient and robust designs for estimating the regression coefficients for those models. We find the prediction capability of those recommended designs in the case of three components and three process variables to be good by checking FDS(Fraction of Design Space) plots.

• 한국의류학회지
• /
• 제25권5호
• /
• pp.891-900
• /
• 2001

The purpose of this study were to evaluate the physical properties and dyeability of cellulase and alkali(NaOH, KOH) treated ramie/man-made fiber mixture fabrics. The mixture fabrics were plain weave made by rayon and polyester fiber as warp yarn, and ramie as weft yarn. The crease resistance, drape, tensile strength, and water absorbancy were measured for test fabrics. The K/S value of dyed fabrics were calculated using color difference meter. Also colorfastness to washing and sunlight of dyed fabrics were evaluated. The results obtained from this study were as follows: Thickness and weight per unit area of alkali treated two mixture fabrics(rayon/ramie, polyester/ramie) increased compared to those of untreated fabrics, but cellulase treated fabrics did not changed a little. And alkali treated rayon/ramie mixture fabrics showed more change than polyester/ramie mixture fabrics on the thickness and weight. Tensile strength and water absorbancy of cellulase treated fabrics decreased compared to those of untreated, but crease resistance increased. Crease resistance, tensile strength(warp direction), water absorbancy and drape of NaOH treated rayon/ramie mixture fabrics decreased compared to those of untreated, but tensile strength(weft direction) increased. Water absorbancy and drape of NaOH treated polyester/ramie mixture fabrics decreased compared to those of untreated, but crease resistance and tensile strength(weft direction) increased. Tensile strength of KOH treated two mixture fabrics increased compared to that of untreated, but water absorbancy and drape decreased. Total hand of cellulase and alkali treated rayon/ramie mixture fabrics was improved compared to untreated. Dyeability of treated mixture fabrics was increased compared to untreated.

• 한국의류학회지
• /
• 제33권12호
• /
• pp.1924-1934
• /
• 2009

현대사회의 혼합화 현상과 니트웨어의 수요 증가에 따른 독특한 질감이 요구되어지고 있어 이에 따른 전략적인 방안들이 절실히 요구되고 있다. 본 연구는 세계 4대 컬렉션의 2000~2008년의 여성컬렉션의 횡편 니트 3~8게이지의 자료를 선정, 현대 니트패션에 나타난 혼합현상을 출현 빈도와 표현특성으로 분석하였다. 혼합현상은 상 하위문화의 혼합, 남 여 성의 혼합, 스타일의 혼합, 공간의 혼합, 타소재의 혼합, 기능의 혼합의 순으로 나타났으며, 2004년에 가장 높은 빈도수를 나타냈다. 혼합현상의 표현특성에서 가장 높은 빈도수를 나타낸 상 하위문화의 혼합은 고급스러운 소재, 고상한 무늬와 색상의 상 하위개념의 경계성의 모호와 남 여 성의 혼합은 기능성과 편리성의 추구와 양성성의 공유로 특성을 나타냈다. 스타일의 혼합은 니트패션의 전통적인 형태에서 정형과 비정형의 스타일의 혼합으로 특성을 나타냈고, 공간의 혼합은 니트의 역사가 깊은 북유럽의 전통적 니트문양이 현대적인 요소와 혼합된 특성을 나타내고 있었다. 타소재의 혼합은 장식적인 소재와 본래의 기능적인 용도를 초월하여 부분적으로 혼합되었고, 기능의 혼합은 두 가지 아이템의 용도로 활용 가능한 특성을 나타냈다. 이와 같이 현대 니트패션에 나타난 혼합 현상은 타영역의 혼합으로 상상력이 더해져 그 표현 가능성의 범위가 점차 확대되어 가고 있다.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.347-358
• /
• 2012

Purpose: Given the mixture components - process variables experimental data, we propose the strategy to find the proper combined model. Methods: Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components - process variables experiments depend on the mixture components - process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. Results: First we choose the reasonable starting models among the class of admissible product models and practical combined models suggested by Lim(2011) based on the model selection criteria and then, search for candidate models which are subset models of the starting model by the sequential variables selection method or all possible regressions procedure. Conclusion: Good candidate models are screened by the evaluation of model selection criteria and checking the residual plots for the validity of the model assumption. The strategy to find the proper combined model is illustrated with examples in this paper.

• 한국조경학회지
• /
• 제26권3호
• /
• pp.8-18
• /
• 1998

This study was to make a effective seed mixture types with Korean native plants by researching te seed timing of suitable woody plants and competitive germination results of various plants for the purpose of cut-slotes revegetation. The results are summarized as follows. 1. In field polystand experiment, comparative among severalcomposition combination for early coverage shows good condition. 2. In combination for early-coverage, mixture of native woody plants only seeded in May and June shows over 90% coverage. It was not inferior to the other mixture types. So mixture of Albizzia Julibrissin, Cymbopogon doeringii, Alnus hirsuta and Indigfera pseudo-tinctoria is able to use to mixture type. 3.In case of combination for scenic beauty, Rhus chinensis shows low germination in the mixture for scenic beauty. But 90 days after seeded in May, it recorded maximum 44 cm height, seeded in June recorede 18 cm height. 4. Lespedeza crytobotrya shows good elongation in the combination for early coverage and scenic beauty, but that effects on elongation of other plants. So, it demands close investigation about suitable mixing rate of plants. 5. Alnus hirsuta, Pinus thunbergii, Betula platyphylla, Spiraea prunifolia var. simpliciflora have been rarely germinated. So, the mixture of these plants wasn't adequate to use for revegatation.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.57-63
• /
• 2013

PURPOSES: This study is to investigate the Hot In-Place recycling asphalt mixture in Korea using field produced materials. METHODS: Hot In-Place reclaimed asphalt mixture was investigated to evaluate the mixture properties based on various test results such as Marshall Test, Indirect Tensile Test, TSR, and Wheel Tracking Test. These test values were compared with domestic standard specification. RESULTS: The result of the laboratory experiment indicates that the Hot In-Place Reclaimed(HIR) asphalt mixture produced at the field constrution site was satisfied all of the test criteria such as Indirect tensile test, Marshall and TSR test, and wheel tracking test. During the test, the research team found that current HIR system is required an extention of mixing time to improve quality and to reduce variation of sample to sample. Although the current HIR mixture was passed the test criteria, there is a potential capability to enhance the mixture properties as extend mixting time. CONCLUSIONS: Based on these laboratory test results, It would be concluded that domestic HIR mixture's properties were satisfied all standard specification related with evaluation of recycling asphalt mixtures. Based on this case study result, there is a chance to save construction cost and increase the usage of reclaimed asphalt concrete in the future.

• 설비공학논문집
• /
• 제28권8호
• /
• pp.331-336
• /
• 2016

This study presents a coolant density calculation device and its corresponding method by using a mass flowmeter and the LabVIEW program. The method can be easily measured with a mixture of coolant and by calculating the percentage of ethylene-glycol without additional investment. The cooling water is very important in a vehicle to protect the engine, and the cooling performance is affected by the mixture concentration and coolant density. The coolant density calculation device measures the mixed concentration in the anti-freeze cooling mixture made from distilled water and ethylene-glycol in real time with the mass flowmeter that is commonly attached to the radiator or heater core. The calculation program for the mixture concentration percentage was developed using the LabVIEW software. The correlation between experimental results and the calculation was conducted for a range of temperature from 40 to $90^{\circ}C$ and by varying the mixture ratio of distilled water and ethylene-glycol. As a result, the anti-freeze coolant concentration in the volume percentage is able to monitor the coolant density in a timely basis by implementing a mixture concentration calculation program without the need for additional equipment investment. The results of the calculation for the mixture concentration level show a maximum 2.7% deviation compared to the experimental results.