• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.33-41
• /
• 2010

본 논문에서는 모래에 비해 배수성이 떨어지지 않으며 지지력이 우수할 것으로 판단되는 쇄석을 사용하여 연약점성토지반에서 쇄석다짐말뚝을 시공 후 쇄석간의 공극에 점토입자의 유입으로 인해 배수능을 상실하는 Clogging 현상에 대한 대체방안을 규명하고자 하였다. 이러한 Clogging 현상의 억제방안으로 국내 화력발전소에서 발생되는 산업폐기물인 석탄회 중 재활용 방안이 미비한 저회의 활용 가능성을 높여 보고자 쇄석과 저회의 적정 혼합비의 다짐시험에 따라 대형직접전단시험을 실시하여 최대전단강도와 내부마찰각을 파악하고, 그에 따른 Clogging 현상의 특성에 대해 실험을 실시하였다. 따라서, 쇄석과 저회의 혼합비에 따른 지지력 및 강도특성을 파악하여 적정 혼합비를 찾고, 현장과 같은 Clogging 현상을 육안으로 확인할 수 있도록 모형토조를 제작하였으며 적정 혼합비에 따른 배수능을 비교 분석하였다. 실험결과 각 혼합비에 따른 대형직접전단시험에서 쇄석과 저회의 혼합비가 80:20일 때 전단강도와 내부마찰각이 가장 크게 나타났으며 Clogging 시험에서도 쇄석 100%의 다짐말뚝보다 Clogging 억제 효과가 점진적으로 뛰어남을 확인하였다.

• 한국지반신소재학회논문집
• /
• 제20권4호
• /
• pp.19-32
• /
• 2021

본 연구에서는 심층혼합처리공법에 관하여 저자들에 의해 수행된 국내/외 설계, 시공 및 품질관리에 대한 평가와 고찰을 수행하였고, 추후 DCM 공법의 발전을 위한 개선 사항들을 제시하였다. 본 연구 결과, 실내배합실험 시 강도에 대한 단면적 보정이 필요하고, 외삽법 적용 시 실제와 다른 결과가 도출될 수 있으므로 주의가 요구됨을 알 수 있었다. 설계 시 개량율과 개량형식 등을 모두 고려하여 적용 가능한 설계법을 선정해야 하며, 안전율이 적용된 허용압축강도는 안정성 검토를 위한 기준치를 의미하는 것이지 설계 지반정수가 아님을 확인하였다. 응력분담비의 경우 관행적인 값을 적용하기 보다는 설계 조건을 반영한 실험 및 이론적 응력분담비를 산정해야 경제적인 설계를 수행할 수 있었다. 시공 시 선천공이 예상되는 경우 증가된 함수비가 원지반 대비 크지 않은 경우 함수비 증가를 고려하지 못한 결과를 사용하여도 큰 문제가 발생하지 않는 경우도 있었다. 또한, 개량길이 대비 선단처리 길이의 비율이 높은 경우 시공 시 단위길이당 설계 시멘트량이 적게 주입될 수 있음을 확인하였다. 품질관리 시 개량체 코어링은 1축 개량체는 D/4~2D/4, 다축 개량체는 D/4 지점이 최적인 것으로 평가되었다. 품질관리를 위한 항목으로 개량체의 일축압축강도와 더불어 TCR을 고려하는 기준이 국내 실정에 더 적합할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.813-831
• /
• 2011

This paper presents an efficient version of Hilbert-Huang transform for nonlinear non-stationary systems analyses. An ensemble empirical mode decomposition (EEMD) is introduced to alleviate the problem of mode mixing between intrinsic mode functions (IMFs) decomposed by EMD. Yet the problem has not been fully resolved when a signal of a similar scale resides in different IMF components. Instead of using a trial and error method to select the "best" outcome generated by EEMD, a hybrid algorithm based on EEMD and EMD is proposed for multi-mode signal processing. The developed approach comprises the steps from a bandpass filter design for regrouping modes of the IMFs obtained from EEMD, to the mode extraction using EMD, and to the assessment of each mode in the marginal spectrum. A simulated two-mode signal is tested to demonstrate the efficiency and robustness of the approach, showing average relative errors all equal to 1.46% for various noise levels added to the signal. The developed approach is also applied to a real bridge structure, showing more reliable results than the pure EMD. Discussions on the mode determination are offered to explain the connection between modegrouping form on the one hand, and mode-grouping performance on the other.

• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.267-275
• /
• 1999

This paper deals with the industrial problem of thermal striping damage on the French prototype fast breeder reactor, Phenix and it was studied in coordination with the research program of IAEA. The thermomechanical and fracture mechanics evaluation procedure of thermal striping damage on the tee-junction of the secondary piping using Green's function method and standard FEM is presented. The thermohydraulic(T/H) loading condition used in the present analysis is the random type thermal loads computed by T/H analysis on the turbulent mixing of the two flows with different temperatures. The thermomechanical fatigue damage was evaluated according to ASME code section 111 subsection NH. The results of the fatigue analysis showed that fatigue failure would occur at the welded joint within 90,000 hours of operation. The assessment for the fracture behavior of the welded joint showed that the crack would be initiated at an early stage in the operation. It took 42,698.9 hours for the crack to propagate up to 5 mm along the thickness direction. After then, however, the instability analysis, using tearing modulus, showed that the crack would be arrested, which was in agreement with the actual observation of the crack. An efficient analysis procedure using Green's function approach for the crack propagation problem under random type load was proposed in this study. The analysis results showed good agreement with those of the practical observations.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.379-382
• /
• 2003

In gravity data correction process, mass effect of the upper part of base level is removed with Bouguer density. Usually, Bouguer density is estimated as a mean density in the field area. But, this may causes a serious problem when ore body is in the area. To overcome this problem, we tried to apply a new method mixing up mass corrections and inversion (3DGTI). 3-D Gravity Terrain Inversion (3DGTI) includes information of topography and distribution of Bouguer density. For this method does not remove the mass effect above base level, it is no longer useless to use Bouguer density. Numerical model tests have shown that the 3DGIT successfully retrieves the anomalous subsurface density distribution of both surface and deeper layers. Model tests shows that this method shows better results than those of conventional one, especially when main target is ore body. The inversion result well delineates the three-dimensional shape of the intruded granite body and basement.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권3호
• /
• pp.440-452
• /
• 2007

The low feed intake immediately after weaning is responsible for villous atrophy and reduced growth rate in newly-weaned pigs. Overcoming this drawback will produce beneficial results for swine producers, and this warrants an understanding of the factors affecting the feed intake in newly-weaned pigs. In fact, a plethora of factors exert influences on feed intake in newly-weaned pigs, and these factors encompass health status, creep feeding, weaning age, mixing of litters, environment, dietary nutrient level and balance, palatability of ingredients, forms of diet presentation, water supply and quality, and stockmanship. Due to the complexity of the factors that affect the feed intake of weaned pigs, a comprehensive approach should be adopted to overcome the low feed intake problem right after weaning. It warrants mention that it is almost impossible to completely restore the feed intake just after weaning to pre-weaning level in terms of energy intake through dietary means which are available for being practiced economically and/or technically in current swine production. However, a refined dietary regime will certainly alleviate the low feed intake problem in the immediate postweaning period.

• 대한한의정보학회지
• /
• 제14권2호
• /
• pp.11-20
• /
• 2008

This thesis' "Hwang Jae Nai Kyung(黃帝內經)", it is one among Uihak5kyung(醫學五經), is originally total of 18 volumes, the first half of 9 volumes are Somun(素問) and the latter half of the others are Youngchu(靈樞). Also, it is best of old book and literature integrating process of Chinese's medicine. Somun(素問) is comprehensive and extensive principles from fundamental problem of medical science related etiology, pathology, physiology to such parts of preventive medicine as regimen, recuperation. Moreover, therapeutic part of diagnosis and remedy, practice of acupuncture and moxibustion is recorded to Youngchu(靈樞). In the "Hwang Jae Nai Kyung(黃帝內經)", basic system takes precautions and medical cure for disease by approaching not method analyzing body but fundamentals of oriental medicine observed as organizing relation. For the purpose of mixing up beauty based on Buddhism of books, we shall pursuit notion of beauty treatment to method improving health because period flowing is changed to real well-being culture chasing outside beauty and healthy life. Then, to come close for part of oriental medicine and cosmetology, we shall present method of meridian pathways and understand device for cosmetic improvement by analyzing relation to 12 of pathways, the five viscera and the six entrails & skin.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.91-95
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mechanism is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by Langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.91-95
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe.

• 환경영향평가
• /
• 제21권1호
• /
• pp.63-69
• /
• 2012

Sediment has been increasingly acknowledged as a carrier in water system and an available contamination. For this reason, dredging of sediment in reservoir to remediate water quality and secure storage capacity is conducted annually. However, disposal of numerous dredged sediment is necessary as a secondary problem. Currently, in Korea, dredged sediment is classified as waste to be reclamated or recycled into sandy soil, however, they are still in trouble because of spacial and environmental problem. Therefore, rather than simple disposal or reuse into sandy soil, it is necessary to research on method to manage main cause of pollution and increase the value as a resource. In this study, we intend to develop a recycle technology for numerous dredged sediment produced by dredging in deteriorated reservoirs using solidificator (stabilizer). To achieve this, we will consider utilization of dredged sediment and evaluation of use possibility as natural recycle by analysis the characteristics of soil-solidificator mixture in terms of physicochemical properties and the mixing ratio between sediment and solidificator.